Wireshark · Wireshark-dev: Re: [Wireshark-dev] Update Windows Build Instructions

["RobiOneKenobi" <robionekenobi@xxxxxxxxxx>]

Hi,

 

I simply copied the following file (coming from older Dev Kit)

 

                Win32.mak

 

to the Windows Kits (either 8.0 or 8.1)

 

                C:\Program Files(x86)\Windows\Kits\8.[0|1]\Include\Um

 

Regards

Robert

 

 

 

From: wireshark-dev-bounces@xxxxxxxxxxxxx [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of Graham Bloice
Sent: Sunday, January 04, 2015 11:09 AM
To: Developer support list for Wireshark
Subject: Re: [Wireshark-dev] Update Windows Build Instructions

 

 

 

On 4 January 2015 at 03:58, Stephen Fisher <sfisher@xxxxxxx> wrote:

On Sat, Jan 03, 2015 at 06:52:56PM +0000, Graham Bloice wrote:

> OK, it seems that even after all the complaints MS still haven't
> updated VS 201x to provide it.  IIRC it went missing in VS2010. See
> here for at least one complaint about it:
> https://connect.microsoft.com/VisualStudio/feedback/details/771247/win32-mak-is-missing-from-vs-2012-win-8-sdk-install

Which installs don't have it?  I just installed VC 2013 Community
Edition at home (the Win7 machine was at work), this time a32-bit Win8
and it also has the file, but I again needed to update the INCLUDE path:

SET INCLUDE=%INCLUDE%;C:\Program Files\Microsoft
SDKs\Windows\v7.1A\Include

 

Maybe your Win7 SDK came from an earlier install of the Platform SDK?  I think mine did, I do have a separate entry for it in the Add\Remove Programs list.  I don't think VS2013 installs that SDK, only the Win 8 ones which are missing the file.

 

I really should try removing VS2013, removing the Win 7 SDK, checking for detritus and re-installing VS2013 CE again.

 

> I wish we could distribute it ourselves, but it has an MS copyright
> notice on it.  Can we ask someone about it?

Do we really need it?  It says on the top:

# Win32.Mak - Win32 application master NMAKE definitions file for the
#     Microsoft Windows SDK programming samples

Which makes it sound like its intended for the programming samples and
just setups up a bunch of variables/options.

 

I think we do need some of the vars.  I suppose we could replicate the bits we need in our own makefile.

 

However, if I ever (or someone else assists) get the Windows CMake build fully operational, all this will go away as we can drop the nmake support.

--

Graham Bloice

# Win32.Mak - Win32 application master NMAKE definitions file for the
#     Microsoft Windows SDK programming samples
#           Copyright (C) Microsoft Corporation
# -------------------------------------------------------------------------
# This files should be included at the top of all MAKEFILEs as follows:
#  !include <Win32.Mak>
# -------------------------------------------------------------------------
#
# Define APPVER = [ 4.0 | 5.0 | 5.01 | 5.02 | 6.0 | 6.1] prior to including win32.mak to get
#  build time checking for version dependencies and to mark the executable
#  with version information.
#
# Define TARGETOS = [ WIN95 | WINNT | BOTH ] prior to including win32.mak
#  to get some build time checking for platform dependencies.
#
# Define TARGETLANG = [ LANG_JAPANESE | LANG_CHINESE | LANG_KOREAN ] prior
#  to including win32.mak to getcompile & link flags for building
#  applications to run on Far-East Windows. (This is an optional parameter.
#  The system locale is the default.)
#
# Define _WIN32_IE = [ 0x0300 | 0x0400 | 0x0500 | 0x0600 | 0x0700 | 0x0800] prior to including win32.mak to
#  get compile and link flags for building applications and components to
#  run on Internet Explorer. (This is an optional parameter.  IE 4.0 is
#  the default.)
#
# -------------------------------------------------------------------------
# NMAKE Options
#
# Use the table below to determine the additional options for NMAKE to
# generate various application debugging, profiling and performance tuning
# information.
#
# Application Information Type         Invoke NMAKE
# ----------------------------         ------------
# For No Debugging Info                nmake nodebug=1
# For Working Set Tuner Info           nmake tune=1
# For Call Attributed Profiling Info   nmake profile=1
#
# Note: The three options above are mutually exclusive (you may use only
#       one to compile/link the application).
#
# Note: creating the environment variables NODEBUG, TUNE, and PROFILE is an
#       alternate method to setting these options via the nmake command line.
#
# Note: TUNE and PROFILE do nothing for 64bit compilation
#
# Additional NMAKE Options             Invoke NMAKE
# ----------------------------         ------------
# For No ANSI NULL Compliance          nmake no_ansi=1
# (ANSI NULL is defined as PVOID 0)
#
# =========================================================================
# Build Rules Quick Start
#
# To build one of the following types of executables, use the specified
# compiler and linker command-line options.
#
#  ---------------------------------------------------------------------------
#   To build:         |  Compiler Options      | Linker options (pick one
#                     |                        | line. con = console,
#                     |                        | gui = GUI, ole = GUI OLE)
#  ---------------------------------------------------------------------------
#  Single threaded    | cdebug cflags cvars    | ldebug guilflags guilibs
#  app with static    |                        | ldebug conlflags conlibs
#  CRT                |                        | ldebug guilflags olelibs
#  ---------------------------------------------------------------------------
#  Multithreaded app  | cdebug cflags cvarsmt  | ldebug guilflags guilibsmt
#  with static CRT    |                        | ldebug conlflags conlibsmt
#                     |                        | ldebug guilflags olelibsmt
#  ---------------------------------------------------------------------------
#  Single or multi-   | cdebug cflags cvarsdll | ldebug guilflags guilibsdll
#  threaded app with  |                        | ldebug conlflags conlibsdll
#  DLL version of CRT |                        | ldebug guilflags olelibsdll
#  (MSVCRT.DLL)       |                        |
#  ---------------------------------------------------------------------------
#  DLL with static    | cdebug cflags cvarsmt  | ldebug dlllflags guilibsmt
#  CRT*               |                        | ldebug dlllflags conlibsmt
#                     |                        | ldebug dlllflags olelibsmt
#  ---------------------------------------------------------------------------
#  DLL with DLL       | cdebug cflags cvarsdll | ldebug dlllflags guilibsdll
#  version of CRT     |                        | ldebug dlllflags conlibsdll
#  (MSVCRT.DLL)       |                        | ldebug dlllflags olelibsdll
#  ---------------------------------------------------------------------------
#
#  * Always make DLLs multithreaded because a DLL has no way to know whether
#    the calling application has multiple threads, and has no way to prevent
#    multithreaded apps from loading it.
#
#  To specify an Intel x86 build that defaults to stdcall, add scall to the
#  list of compiler options.
#
# =========================================================================

!IFNDEF _WIN32_MAK_
_WIN32_MAK_ = 1

# -------------------------------------------------------------------------
# Get CPU Type - exit if CPU environment variable is not defined
# -------------------------------------------------------------------------

# Win95 does not define PROCESSOR_ARCHITECTURE - default to i386

!IF "$(PROCESSOR_ARCHITECTURE)" == ""
CPU=i386
PROCESSOR_ARCHITECTURE=x86
!endif

!IF !DEFINED(CPU) || "$(CPU)" == ""
CPU = $(PROCESSOR_ARCHITECTURE)
!ENDIF # CPU

# if PROCESSOR_ARCHITECTURE was x86 or X86 change CPU to i386

!IF ( "$(CPU)" == "X86" ) || ( "$(CPU)" == "x86" )
CPU = i386
!ENDIF # CPU == X86

!IF "$(CPU)" != "i386"
!IF "$(CPU)" != "IA64"
!IF "$(CPU)" != "AMD64"
!ERROR  Must specify CPU environment variable ( CPU=i386, CPU=IA64, CPU=AMD64)
!ENDIF
!ENDIF
!ENDIF


# -------------------------------------------------------------------------
# Get Target Operating System - Default to WINNT
# -------------------------------------------------------------------------
!IFNDEF TARGETOS
TARGETOS = WINNT
!ENDIF

!IF "$(TARGETOS)" != "WINNT"
!IF "$(TARGETOS)" != "WIN95"
!IF "$(TARGETOS)" != "BOTH"
!ERROR Must specify TARGETOS environment variable (BOTH, WIN95, WINNT)
!ENDIF
!ENDIF
!ENDIF

# default to APPVER of 5.0

!IFNDEF APPVER
APPVER = 5.0
!ENDIF

!IF "$(APPVER)" != "6.1"
!IF "$(APPVER)" != "6.0"
!IF "$(APPVER)" != "5.02"
!IF "$(APPVER)" != "5.01"
!IF "$(APPVER)" != "5.0"
!IF "$(APPVER)" != "4.0"
!ERROR Must specify APPVER environment variable (4.0, 5.0, 5.01, 5.02, 6.0, 6.1)
!ENDIF
!ENDIF
!ENDIF
!ENDIF
!ENDIF
!ENDIF

!IF "$(APPVER)" =="6.1"
!IFNDEF _WIN32_IE
_WIN32_IE = 0x0800
!ENDIF # _WIN32_IE
!ENDIF # APPVER == 6.1

!IF "$(APPVER)" =="6.0"
!IFNDEF _WIN32_IE
_WIN32_IE = 0x0700
!ENDIF # _WIN32_IE
!ENDIF # APPVER == 6.0

!IF "$(APPVER)" =="5.0"
!IFNDEF _WIN32_IE
_WIN32_IE = 0x0500
!ENDIF # _WIN32_IE
!ENDIF # APPVER == 5.0

!IF "$(APPVER)" =="5.01"
!IFNDEF _WIN32_IE
_WIN32_IE = 0x0600
!ENDIF # _WIN32_IE
!ENDIF # APPVER == 5.01

!IF "$(APPVER)" =="5.02"
!IFNDEF _WIN32_IE
_WIN32_IE = 0x0600
!ENDIF # _WIN32_IE
!ENDIF # APPVER == 5.02

!IFNDEF _WIN32_IE
_WIN32_IE = 0x0400
!ENDIF

# -------------------------------------------------------------------------
# Build tool declarations common to all platforms
#    Check to see if Cole Porter is used, otherwise use C/C++ compiler
# -------------------------------------------------------------------------

cc     = cl
link   = link
implib = lib

midl   = midl
rc     = Rc
hc     = Start /Wait Hcrtf
mc     = Mc

hcvars = -xn

# -------------------------------------------------------------------------
# Platform Dependent Compile Flags - must be specified after $(cc)
#
# Note: Debug switches are on by default for current release
#
# These switches set code generation and debugging options for the compiler.
# They also set macros used for conditional compilation.
#
# The debugging switches allow for source level debugging with WinDebug or
# Microsoft Visual C++.
#
# Common compiler flags:
#   -c   - compile without linking
#   -W3  - Set warning level to level 3    (-W4 for 64-bit compilations)
#   -Zi  - generate debugging information
#   -Od  - disable all optimizations
#   -Ox  - use maximum optimizations
#   -Zd  - generate only public symbols and line numbers for debugging
#   -GS  - enable security checks
#
# i386 specific compiler flags:
#   -Gz  - stdcall   (only if scall is added to makefile's compiler build rules)
#
# -------------------------------------------------------------------------

# declarations common to all compiler options
ccommon = -c -DCRTAPI1=_cdecl -DCRTAPI2=_cdecl -nologo -GS

# for compatibility with old source code, map {try, except, leave, finally}
# to their proper names (i.e. prefaced by "__")
!IFDEF SEHMAP
ccommon = $(ccommon) -FIsehmap.h
!ENDIF

!IF "$(TARGETLANG)" == "LANG_JAPANESE"
ccommon = $(ccommon) -DJAPAN -DDBCS -DFE_IME
!ENDIF

!IF "$(TARGETLANG)" == "LANG_CHINESE"
ccommon = $(ccommon) -DDBCS -DFE_IME
!ENDIF

!IF "$(TARGETLANG)" == "LANG_KOREAN"
ccommon = $(ccommon) -DDBCS -DFE_IME
!ENDIF

!IF "$(CPU)" == "i386"
cflags = $(ccommon) -D_X86_=1  -DWIN32 -D_WIN32 -W3
scall  = -Gz

!ELSEIF "$(CPU)" == "IA64"
cflags = $(ccommon) -D_IA64_=1 -DWIN64 -D_WIN64  -DWIN32 -D_WIN32
cflags = $(cflags) -W4
scall  =

!ELSEIF "$(CPU)" == "AMD64"
cflags = $(ccommon) -D_AMD64_=1 -DWIN64 -D_WIN64  -DWIN32 -D_WIN32
cflags = $(cflags) -W4
scall  =

!ENDIF


!IF "$(APPVER)" == "4.0"
NMAKE_WINVER = 0x0400
!ELSEIF "$(APPVER)" == "5.0"
NMAKE_WINVER = 0x0500
!ELSEIF "$(APPVER)" == "5.01"
NMAKE_WINVER = 0x0501
!ELSEIF "$(APPVER)" == "5.02"
NMAKE_WINVER = 0x0502
!ELSEIF "$(APPVER)" == "6.0"
NMAKE_WINVER = 0x0600
!ELSEIF "$(APPVER)" == "6.1"
NMAKE_WINVER = 0x0601
!ENDIF

!IF "$(TARGETOS)" == "WINNT"
cflags = $(cflags) -D_WINNT -D_WIN32_WINNT=$(NMAKE_WINVER) -DNTDDI_VERSION=$(NMAKE_WINVER)0000
!ENDIF

!IF "$(TARGETOS)" == "WIN95"
cflags = $(cflags) -D_WIN95 -D_WIN32_WINDOWS=$(NMAKE_WINVER) /D_WIN32_DCOM
!ENDIF

# regardless of the TARGET OS, define compile time WINVER to match APPVER macro
cflags = $(cflags) -D_WIN32_IE=$(_WIN32_IE) -DWINVER=$(NMAKE_WINVER)


# Set debugging options

!IF "$(CPU)" != "IA64"
!IFDEF NODEBUG
cdebug = -Ox -DNDEBUG 
!ELSE IFDEF PROFILE
cdebug = -Gh -Ox -DNDEBUG
!ELSE IFDEF TUNE
cdebug = -Gh -Ox -DNDEBUG
!ELSE
cdebug = -Zi -Od -DDEBUG
!ENDIF

!ELSE

!IFDEF NODEBUG
cdebug = -Ox -DNDEBUG
!ELSE
cdebug = -Zi -Od -DDEBUG
!ENDIF

!ENDIF

# -------------------------------------------------------------------------
# Target Module & Subsystem Dependent Compile Defined Variables - must be
#   specified after $(cc)
#
# The following table indicates the various acceptable combinations of
# the C Run-Time libraries LIBC, LIBCMT, and MSVCRT respect to the creation
# of a EXE and/or DLL target object.  The appropriate compiler flag macros
# that should be used for each combination are also listed.
#
# Executable Type          C Runtime Lib        Compiler switch
# -------------------------------------------------------------
# Single threaded app      static CRT           CVARS       *
# Single-threaded app      DLL CRT              CVARSDLL
# Multi-threaded app       static CRT           CVARSMT     *
# Multi-threaded app       DLL CRT              CVARSDLL    *
#
# Single threaded DLL      static CRT           CVARS
# Single-threaded DLL      DLL CRT              CVARSDLL
# Multi-threaded DLL       static CRT           CVARSMT     *
# Multi-threaded DLL       DLL CRT              CVARSDLL    *
#
# * - Denotes the Recommended Configuration
#
# When building single-threaded applications you can link your executable
# with either LIBC, LIBCMT, or MSVCRT, although LIBC will provide the best
# performance.
#
# When building multi-threaded applications, either LIBCMT or MSVCRT can
# be used as the C-Runtime library, as both are multi-thread safe.
#
# Note: Any executable which accesses a DLL linked with MSVCRT.LIB must
#       also link with MSVCRT.LIB instead of LIBC.LIB or LIBCMT.LIB.
#       When using DLLs, it is recommended that all of the modules be
#       linked with MSVCRT.LIB.
#
# Note: The macros of the form xDLL are used when linking the object with
#       the DLL version of the C Run-Time (that is, MSVCRT.LIB).  They are
#       not used when the target object is itself a DLL.
#
# -------------------------------------------------------------------------

!IFDEF NO_ANSI
noansi = -DNULL=0
!ENDIF


# for Windows applications that use the C Run-Time libraries
!IFDEF NODEBUG
cvarsmt    = $(noansi) -D_MT -MT
cvars      = $(cvarsmt)
cvarsdll   = $(noansi) -D_MT -D_DLL -MD
!ELSE
cvarsmt    = $(noansi) -D_MT -MTd
cvars      = $(cvarsmt)
cvarsdll   = $(noansi) -D_MT -D_DLL -MDd
!ENDIF


# for compatibility with older-style makefiles
cvarsmtdll = $(cvarsdll)

# for POSIX applications
psxvars    = -D_POSIX_

# resource compiler
rcflags = /r
!ifdef NODEBUG
rcvars = -DWIN32 -D_WIN32 -DWINVER=$(NMAKE_WINVER) $(noansi)
!else
rcvars = -DWIN32 -D_WIN32 -DWINVER=$(NMAKE_WINVER) -DDEBUG -D_DEBUG $(noansi)
!endif


!IF "$(TARGETLANG)" == "LANG_JAPANESE"
rcflags = $(rcflags) /c932
rcvars = $(rcvars) -DJAPAN -DDBCS -DFE_IME
!ENDIF

!IF "$(TARGETLANG)" == "LANG_CHINESE"
rcvars = $(rcvars) -DDBCS -DFE_IME
!ENDIF

!IF "$(TARGETLANG)" == "LANG_KOREAN"
rcvars = $(rcvars) -DDBCS -DFE_IME
!ENDIF


# -------------------------------------------------------------------------
# Platform Dependent MIDL Flags - must be specified after midl
#
#
# -------------------------------------------------------------------------
!IF "$(TARGETOS)" == "WIN95"
MIDL_OPTIMIZATION=-target NT40
!ELSEIF "$(TARGETOS)" == "WINNT"
!IF "$(APPVER)" == "5.0"
MIDL_OPTIMIZATION=-target NT50
!ELSEIF "$(APPVER)" == "6.0"
MIDL_OPTIMIZATION=-target NT60
!ELSEIF "$(APPVER)" == "6.1"
MIDL_OPTIMIZATION=-target NT61
!ELSEIF "$(APPVER)" == "5.01"
MIDL_OPTIMIZATION=-target NT51
!ELSEIF "$(APPVER)" == "5.02"
MIDL_OPTIMIZATION=-target NT51
!ELSEIF "$(APPVER)" == "4.0"
MIDL_OPTIMIZATION=-target NT40
!ENDIF
!ENDIF

!IF "$(CPU)" == "IA64"
MIDL_OPTIMIZATION = $(MIDL_OPTIMIZATION) /ia64
!ELSEIF "$(CPU)" == "AMD64"
MIDL_OPTIMIZATION = $(MIDL_OPTIMIZATION) /x64
!ELSE
MIDL_OPTIMIZATION = $(MIDL_OPTIMIZATION) /win32
!ENDIF

!IF ("$(TARGETOS)" == "WINNT" ) && ("$(APPVER)" != "4.0")
MIDL_OPTIMIZATION = $(MIDL_OPTIMIZATION) /robust
!ENDIF



# -------------------------------------------------------------------------
# Platform Dependent Link Flags - must be specified after $(link)
#
# Note: $(DLLENTRY) should be appended to each -entry: flag on the link
#       line.
#
# Note: When creating a DLL that uses C Run-Time functions it is
#       recommended to include the entry point function of the name DllMain
#       in the DLL's source code.  Also, the MAKEFILE should include the
#       -entry:_DllMainCRTStartup$(DLLENTRY) option for the creation of
#       this DLL.  (The C Run-Time entry point _DllMainCRTStartup in turn
#       calls the DLL defined DllMain entry point.)
#
# -------------------------------------------------------------------------

# declarations common to all linker options
lflags  = $(lflags) /INCREMENTAL:NO /NOLOGO

# declarations for use on Intel x86 systems
!IF "$(CPU)" == "i386"
DLLENTRY = @12
!ENDIF

# declarations for use on Intel Architecture 64-bit systems
!IF "$(CPU)" == "IA64"
DLLENTRY =
!ENDIF

# declarations for use on AMD64 systems
!IF "$(CPU)" == "AMD64"
DLLENTRY =
!ENDIF


# -------------------------------------------------------------------------
# Target Module Dependent Link Debug Flags - must be specified after $(link)
#
# These switches allow the inclusion of the necessary symbolic information
# for source level debugging with WinDebug, profiling and/or performance
# tuning.
#
# Note: Debug switches are on by default.
# -------------------------------------------------------------------------

!IF "$(CPU)" == "i386"

!IFDEF NODEBUG
ldebug = /RELEASE
!ELSE
ldebug = /DEBUG /DEBUGTYPE:cv
!ENDIF

!ELSE

!IFDEF NODEBUG
ldebug = /RELEASE
!ELSE IFDEF PROFILE
ldebug = /DEBUG:mapped,partial /DEBUGTYPE:coff
!ELSE IFDEF TUNE
ldebug = /DEBUG:mapped,partial /DEBUGTYPE:coff
!ELSE
ldebug = /DEBUG /DEBUGTYPE:cv
!ENDIF

!ENDIF

# for compatibility with older-style makefiles
linkdebug = $(ldebug)


# -------------------------------------------------------------------------
# Subsystem Dependent Link Flags - must be specified after $(link)
#
# These switches allow for source level debugging with WinDebug for local
# and global variables.  They also provide the standard application type and
# entry point declarations.
#
# Note that on x86 screensavers have a WinMain entrypoint, but on RISC
# platforms it is main.  This is a Win95 compatibility issue.
#
# -------------------------------------------------------------------------

# Windows 98 needs subsystem version set to 4.10 for version 5.0 features.
!IF ("$(APPVER)" == "5.0") && (("$(TARGETOS)" == "BOTH") || ("$(TARGETOS)" == "WIN95"))
EXEVER = 4.10
!ELSE
EXEVER = $(APPVER)
!ENDIF


# ---------------------------------------------

# for Windows applications
conlflags = $(lflags) -subsystem:console,$(EXEVER)
guilflags = $(lflags) -subsystem:windows,$(EXEVER)
dlllflags = $(lflags) -entry:_DllMainCRTStartup$(DLLENTRY) -dll

# For screen savers
!IF "$(CPU)" == "i386"
savlflags = $(lflags) -subsystem:windows,$(EXEVER) -entry:WinMainCRTStartup
!ELSE
savlflags = $(lflags) -subsystem:windows,$(EXEVER) -entry:mainCRTStartup
!ENDIF

# for POSIX applications
psxlflags = $(lflags) -subsystem:posix -entry:__PosixProcessStartup

# for compatibility with older-style makefiles
conflags  = $(conlflags)
guiflags  = $(guilflags)
psxflags  = $(psxlflags)

# -------------------------------------------------------------------------
# C Run-Time Target Module Dependent Link Libraries
#
# Note: For POSIX applications, link with $(psxlibs).
# -------------------------------------------------------------------------

# for POSIX applications
psxlibs    = libcpsx.lib psxdll.lib psxrtl.lib oldnames.lib


# optional profiling and tuning libraries
!IF "$(CPU)" != "IA64"

!IFDEF PROFILE
optlibs =  cap.lib
!ELSE IFDEF TUNE
optlibs = wst.lib
!ELSE
optlibs =
!ENDIF

!ELSE
optlibs =
!ENDIF

# if building for basic Windows 95, use WinSock1, else use WinSock2
!IF "$(TARGETOS)" == "WIN95"
!IF "$(APPVER)" == "4.0"
winsocklibs = wsock32.lib
!ELSE
winsocklibs = ws2_32.lib mswsock.lib
!ENDIF
!ELSE
winsocklibs = ws2_32.lib mswsock.lib
!ENDIF


# basic subsystem specific libraries, less the C Run-Time
baselibs    = kernel32.lib $(optlibs) $(winsocklibs) advapi32.lib
winlibs     = $(baselibs) user32.lib gdi32.lib comdlg32.lib winspool.lib

# for Windows applications that use the C Run-Time libraries
conlibs     = $(baselibs)
guilibs     = $(winlibs)

# for OLE applications
olelibs     = ole32.lib uuid.lib oleaut32.lib $(guilibs)

#for backwards compatibility
conlibsmt   = $(conlibs)
conlibsdll  = $(conlibs)
guilibsmt   = $(guilibs)
guilibsdll  = $(guilibs)
olelibsmt   = $(olelibs)
olelibsdll  = $(olelibs)

# for backward compatibility
ole2libs    = $(olelibs)
ole2libsmt  = $(olelibsmt)
ole2libsdll = $(olelibsdll)

# Visual Basic
bc     = vb6
bc_exe = /Make
bc_dll = /Makedll

# Set the Output Directory
!IF ("$(APPVER)" == "6.1") 
OUTDIR=WIN7
!ELSEIF ("$(APPVER)" == "6.0") 
OUTDIR=Vista
!ELSEIF "$(APPVER)" == "5.0"
OUTDIR=WIN2000
!ELSEIF "$(APPVER)" == "5.01" 
OUTDIR=XP32
!ELSEIF "$(APPVER)" == "5.02"
OUTDIR=SRV2003
!ELSEIF "$(APPVER)" == "4.0"
OUTDIR=NT4
!ENDIF

!IF "$(CPU)" == "AMD64"
OUTDIR=$(OUTDIR)_X64
!ELSEIF "$(CPU)" == "IA64"
OUTDIR=$(OUTDIR)_64
!ENDIF

#set Prerelease Out directories
!IF "$(SDKPRERELEASE)" == "1"
OUTDIR=PRE_$(OUTDIR)
!ENDIF

#Set DEBUG
!IF "$(NODEBUG)" == ""
OUTDIR=$(OUTDIR)_DEBUG
!ELSE
OUTDIR=$(OUTDIR)_RETAIL
!ENDIF

!IF "$(OS)" == "Windows_NT"
CLEANUP=if exist $(OUTDIR)/$(NULL) rd /s /q $(OUTDIR)
!ELSE
CLEANUP=deltree /y $(OUTDIR)
!ENDIF

VC6MSG=This sample only compiles with Microsoft Visual C++ 6.0. \
       To compile this run vcvars32.bat for Visual C++ 6.0, and setenv.bat in $(MSSDK).

WIN64MSG=This sample is currently not supported on the 64 bit platform.

#ENDIF _WIN32_MAK_
!ENDIF