Wireshark-users: Re: [Wireshark-users] wireshark and virtual ethernet adapters by parallels
Date Index Thread Index Other Months All Mailing Lists
[Date Prev] [Date Next] [Thread Prev] [Thread Next]


From: Zhenyu Zhao <zzhao@xxxxxxxxxxxxxxx>
Date: Wed, 9 Sep 2009 10:07:24 -0400 (EDT)

The packets between the two systems don't go through the physical interface. You could try to run sniffers on the guest system first. Alternatively you could try to run sniffers against the virtual interface on the host system. 

Zhen

On Wed, 9 Sep 2009, Matthias Steinböck wrote:


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

hi all!

does anybody has allready tried to capture packages sent between mac
os x and a guest system running under parallels?

parallels creates an interface:

en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST>
mtu 1500
	inet6 fe80::21c:42ff:fe00:8%en2 prefixlen 64 scopeid 0x7
	inet 10.211.55.2 netmask 0xffffff00 broadcast 10.211.55.255
	ether 00:1c:42:00:00:08
	media: autoselect status: active
	supported media: autoselect

and the guest system has the ip-address 10.211.55.4

so i thought i should be able to capture packages sent between the
systems by capturing en2 but wireshark doesn't see any packages.
does anybody has an idea how i could capture them (parallels runs
under mac os x)?

thanks in advance
- --
Matthias Steinböck

GPG/PGP: BCEA 960C 5269 559D 4EA8  943C 187D A0F3 3D32 9D69
wwwkeys.at.pgp.net

-----BEGIN PGP SIGNATURE-----
Version: GnuPG/MacGPG2 v2.0.12 (Darwin)

iD8DBQFKp0fXGH2g8z0ynWkRAnUGAKCMo7OAwb0B9+OBJlnrnufo6bZ4QQCgiT6m
iM8v1gjYRLxl39wgzChvQzc=
=xmC4
-----END PGP SIGNATURE-----

___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
            mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe