Yep. That's what I was afraid of. I'm gonna explore the snmp idea.
Thanks,
-T
-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of
Randy.Grein@xxxxxxxxxxxxxx
Sent: Friday, April 13, 2007 1:55 PM
To: Community support list for Wireshark
Cc: wireshark-users@xxxxxxxxxxxxx; wireshark-users-bounces@xxxxxxxxxxxxx
Subject: Re: [Wireshark-users] Can This Be Done?
No. The setup will appear to work, but of course the switch interface
will
be overwhelmed as soon as PC traffic goes above 100 MBits/s. To be
technically accurate most switches will attempt to buffer the overflow
which will average out traffic rates just above 100 Mbits. And of course
you have the problem with duplex - your setup has 100 Mbits inbound, but
it is (or should be) viewing inbound AND outbound traffic on a gigabit
port - for 2 gigabits worth of potential traffic. Generally this duplex
issue isn't a problem if your monitor and monitored ports are the same
speed, but this configuration just won't work.
Given the price of gigabit adapters and ports it makes sense to upgrade
your Wireshark PC.
Randy Grein
Network Engineer
"Tennis Smith" <tennis@xxxxxxxxxxxxxxxxxxx>
Sent by: wireshark-users-bounces@xxxxxxxxxxxxx
04/13/2007 01:39 PM
Please respond to
Community support list for Wireshark <wireshark-users@xxxxxxxxxxxxx>
To
<wireshark-users@xxxxxxxxxxxxx>
cc
Subject
[Wireshark-users] Can This Be Done?
Hi,
I have a wireshark pc with a 10/100 nic connected to a switch. The port
attached to the pc is getting data mirrored from a 1Gig port passing
traffic. So, in other words, the w/s pc is sniffing a port that could
run
as fast as 1gig (see below).
1g 1g
PC1------Switch------PC2
|
|
|(100mb)
Wireshark
In my case, there isn't any need to capture data. I only want to
measure
traffic rates.
Can the wireshark pc accurately detect traffic rates on the PC1/PC2
connection when speed exceeds 100mb?
Thanks,
-Tennis _______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users
- -------------------------
CONFIDENTIALITY NOTICE: The information in this message may be
proprietary and/or confidential, and is intended only for the use of the
individual(s) to whom this email is addressed. If you are not the
intended recipient, you are hereby notified that any use, dissemination,
distribution or copying of this communication is strictly prohibited. If
you have received this communication in error, please notify us
immediately by replying to this email and deleting this email from your
computer. Nothing contained in this email or any attachment shall
satisfy the requirements for contract formation or constitute an
electronic signature.
_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users
