Wireshark-dev: Re: [Wireshark-dev] Parsing openflow
From: Graham Bloice <[email protected]>
Date: Wed, 15 Aug 2018 16:14:57 +0100


On Wed, 15 Aug 2018 at 16:04, Dario Lombardo <[email protected]> wrote:
Try to right-click on the field you want to extract and choose "prepare a filter -> selected". In the upper part of wireshark a filter with the field you want will appear. That's the name of the field. However, if you used an invalid name before, tshark would tell you (tshark: Some fields aren't valid:). Remember that if a packet doesn't have that field, nothing will be printed. Make some practice with easier fields (I suggest ip.src) if you're not used to those tshark options.


No need to create a filter, select the field in the packet tree and look for the field name in the status bar in parenthesis.
  
On Wed, Aug 15, 2018 at 4:08 PM Avi Cohen (A) <[email protected]> wrote:

Hi Dario

 

I can easily create a file with the  packets headers as a columns (the original headers of a pkt e.g eth ip tcp etc..)  – but I need the TCP payload fields (which are the flow headers)

For example I need to the surrounded fields in the picture below (or in the attached png), something like  tshark –T fileds –e OpenFlow.of_match.eth_src

This is probably incorrect  syntax because it is not generate the required filed columns

Best Regards

Avi

 

 

cid:image002.png@01D434B8.690F8A80

 

 

 

 

From: Wireshark-dev [mailto:[email protected]] On Behalf Of Dario Lombardo
Sent: Tuesday, 14 August, 2018 2:50 PM
To: Developer support list for Wireshark
Subject: Re: [Wireshark-dev] Parsing openflow

 

Hi Avi

Have a look at tshark and its -E and -e options. That could do the job.

 

On Tue, Aug 14, 2018 at 1:19 PM Avi Cohen (A) <[email protected]> wrote:

Hi
I need to capture open-flow msgs  (e.g FLOW_MOD to add new flows) from controller to vSwitch ,
And to generate e.g.  a *file* which its rows are the captured flows and its  columns  are the flow header fields e.g. column 1 source-mac , column 2 dest-mac  , column 3 source-IP etc..  - whenever a field is not relevant I can set the fields as FFFF (don't care)
Also the action (actions)  should be put in a column   
I need this file as an input to an algorithm that should manipulate these flows ?

My question can I use the wireshark  pkg for this purpose ? if yes what is the recommended way   ?

Best Regards
Avi
___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <[email protected]>
Archives:    https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev
             mailto:[email protected]?subject=unsubscribe


 

--

Naima is online.
___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <[email protected]>
Archives:    https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev
             mailto:[email protected]?subject=unsubscribe


--
Naima is online.
___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <[email protected]>
Archives:    https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev
             mailto:[email protected]?subject=unsubscribe


--
Graham Bloice
Software Developer
Trihedral UK Limited