Wireshark · Wireshark-dev: Re: [Wireshark-dev] Wireshark development setup Help

[Sreejith M M <sreejith.mm@xxxxxxxxx>]

Even the below files does not exist in my PC.

For the sake of future users, I believe the wireshark developer doc must be editied

On Sat, Nov 9, 2013 at 4:32 PM, wsgd <wsgd@xxxxxxx> wrote:

My building env commands on Windows 7 64 bits, depending on the target :
- "C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\vcvarsall.bat"              if 2008 & win32
- "C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\bin\vcvars64.bat"           if 2008 & win64
- "C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\vcvarsall.bat"             if 2010 & win32
- call "C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\SetEnv.cmd" /x64            if 2010 & win64

Could exist other possibilities.


Olivier


Le 09/11/2013 08:16, Sreejith M M a écrit :

Thank you John.

Unfortunately, I am not in a position to re install my windows image if something goes wrong.

So I would wait for some one else to explain why this mysterious "if you want to build 64-bit binaries for Windows 7" is present in the tutorial, I hope that it would be for some good reason and I can work around this problem in a simpler way.

Otherwise,I will have to take your advise and do all the steps in some other windows installation.

Sreejith

On Sat, Nov 9, 2013 at 2:19 AM, John Dill <John.Dill@xxxxxxxxxxxxxxxxx> wrote:

>Message: 6
>Date: Fri, 8 Nov 2013 23:14:28 +0530
>From: Sreejith M M <sreejith.mm@xxxxxxxxx>
>To: wireshark-dev@xxxxxxxxxxxxx
>Subject: [Wireshark-dev] Wireshark development setup Help
>Message-ID:
>        <CAEDT3uTxa4GqX9x5HnBfmvHRVM42-m_C_67-Kf6jZcMUjmEeNg@xxxxxxxxxxxxxx>
>Content-Type: text/plain; charset="iso-8859-1"

>
>I am trying to make a new dissector for wireshark. As part of this, I am
>following wireshark doc to setup tools and source code .
>
>I have a 32 bit windows 7
>I followed below steps as shown in the
>http://www.wireshark.org/docs/wsdg_html_chunked/ChSetupWin32.html page
>
>
>

>   1.
>
>   C compiler: Download<http://www.microsoft.com/visualstudio/eng/downloads#d-2010-express>and

>install "Microsoft Visual C++ 2010 Express Edition." (This is a very
>   large download.)

>   2.
>
>   C compiler service pack:
>Download<http://www.microsoft.com/en-us/download/details.aspx?id=23691>and

>install "Microsoft Visual Studio 2010 Service Pack 1." (This is a very
>   large download.)

>   3. Install Cygwin
>   4. Install python
>   5. Install TortoiseSVN
>   6. edit config.nmake

>
>After this I am not able to find
>

>*C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\SetEnv.Cmd*
>
>*or*

>
>
>vcvarsall.bat or vcvars32.bat
>
>
>One thing is that , I am not having v7.1 ,rather v7.0A. But I am suprised
>that this folder doesnt have any of the above 3 files.
>
>
>Please help to proceed

I ran into the same problem, where I realized that I needed the Windows SDK to do the actual build in Windows 7 32-bit.

The problem was that my development install was broken where I could not properly install the Windows SDK (step 2) if I already installed the C compiler service pack (step 4).  I would uninstall whatever you have done in section 2.2.1, and reinstall *all* those components in order from steps 1 through 4.  Unfortunately, I had to re-image my Windows installation before I could get the Wireshark build process to work because the uninstall broke the registry to the point that I couldn't get Windows SDK to re-install properly.  Starting over, I could get the Wireshark installation to work if I ran each step without skipping steps 2 or 4, this time installing the Windows SDK even though I was on a 32-bit Windows 7 computer.

I would consider removing the "if you want to build 64-bit binaries for Windows 7" text simply because it can give people the impression that you don't need to install it if you have Windows 7 32-bit.  If someone has successfully built Wireshark for Windows 7 32-bit skipping steps 2 and 4 of section 2.2.1, then I must have a misunderstanding somewhere.

Hope it helps!
John D.

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives:    http://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
             mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives:    http://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
             mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe

-- 
Wireshark Generic Dissector http://wsgd.free.fr

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives:    http://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
             mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe