Wireshark · Wireshark-dev: Re: [Wireshark-dev] [Wireshark-users] Decode As dialog doesn't offer SMB

[Bill Meier <wmeier@xxxxxxxxxxx>]

> I was wrong. Using NBSS as the "decode as" does work .... (as Ronnie 
> noted in his reply to John Walsh).
>
> Bill

It does seem to work, but a quick run-thru with the debugger suggests 
that some further analysis is required. Port 445 is certainly 
"hard-wired" in the code ... I'll have to look tomorrow when I'm not 
falling asleep...

Bill