Display Filter Reference: IEEE C37.118 Synchrophasor Protocol
Protocol field name: synphasor
Versions: 1.2.0 to 3.4.0
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| synphasor.actual_frequency_value | Actual frequency value | Floating point (single-precision) | 2.0.0 to 3.4.0 |
| synphasor.analog_value | Analog value | Character string | 2.0.0 to 3.4.0 |
| synphasor.bad_checksum | Bad checksum | Label | 2.4.0 to 3.4.0 |
| synphasor.channel_name | Channel name | Character string | 2.0.0 to 3.4.0 |
| synphasor.checksum | Checksum | Unsigned integer, 2 bytes | 2.0.0 to 3.4.0 |
| synphasor.checksum.status | Checksum Status | Unsigned integer, 1 byte | 2.4.0 to 3.4.0 |
| synphasor.command | Command | Unsigned integer, 2 bytes | 1.2.0 to 3.4.0 |
| synphasor.conf.analog_format | Analog values format | Boolean | 1.2.0 to 3.4.0 |
| synphasor.conf.analog_offset | Analog offset | Floating point (single-precision) | 3.2.0 to 3.4.0 |
| synphasor.conf.analog_scale_factor | Analog scale factor | Floating point (single-precision) | 3.2.0 to 3.4.0 |
| synphasor.conf.cfgcnt | Configuration change count | Unsigned integer, 2 bytes | 1.2.0 to 3.4.0 |
| synphasor.conf.chnam | Channel name | Character string | 3.4.0 |
| synphasor.conf.chnam_len | Channel name length | Unsigned integer, 1 byte | 3.2.0 to 3.4.0 |
| synphasor.conf.contindx | Continuation index | Unsigned integer, 2 bytes | 3.2.0 to 3.4.0 |
| synphasor.conf.dfreq_format | FREQ/DFREQ format | Boolean | 1.2.0 to 3.4.0 |
| synphasor.conf.fnom | Nominal line frequency | Boolean | 1.2.0 to 3.4.0 |
| synphasor.conf.grp_dly | PM group delay | Unsigned integer, 4 bytes | 3.2.0 to 3.4.0 |
| synphasor.conf.numpmu | Number of PMU blocks included in the frame | Unsigned integer, 2 bytes | 1.2.0 to 3.4.0 |
| synphasor.conf.phasor_angle_offset | Phasor angle offset | Floating point (single-precision) | 3.2.0 to 3.4.0 |
| synphasor.conf.phasor_component | Phasor Type | Unsigned integer, 1 byte | 3.4.0 |
| synphasor.conf.phasor_flags | Modification | Boolean | 3.2.0 to 3.2.8 |
| synphasor.conf.phasor_format | Phasor format | Boolean | 1.2.0 to 3.4.0 |
| synphasor.conf.phasor_mod.downsampled | Modification | Boolean | 3.4.0 |
| synphasor.conf.phasor_mod.downsampled_fir | Modification | Boolean | 3.4.0 |
| synphasor.conf.phasor_mod.downsampled_reselect | Modification | Boolean | 3.4.0 |
| synphasor.conf.phasor_mod.filtered | Modification | Boolean | 3.4.0 |
| synphasor.conf.phasor_mod.mag_calibration | Modification | Boolean | 3.4.0 |
| synphasor.conf.phasor_mod.phase_calibration | Modification | Boolean | 3.4.0 |
| synphasor.conf.phasor_mod.phase_rotation | Modification | Boolean | 3.4.0 |
| synphasor.conf.phasor_mod.pseudo_phasor | Modification | Boolean | 3.4.0 |
| synphasor.conf.phasor_mod.type_not_def | Modification | Boolean | 3.4.0 |
| synphasor.conf.phasor_mod.upsampled_extrapolation | Modification | Boolean | 3.4.0 |
| synphasor.conf.phasor_mod.upsampled_interpolation | Modification | Boolean | 3.4.0 |
| synphasor.conf.phasor_notation | Phasor notation | Boolean | 1.2.0 to 3.4.0 |
| synphasor.conf.phasor_scale_factor | Phasor scale factor | Floating point (single-precision) | 3.2.0 to 3.4.0 |
| synphasor.conf.phasor_type | Phasor Type | Boolean | 3.4.0 |
| synphasor.conf.phasor_user_flags | Binary format | Boolean | 3.2.0 to 3.4.0 |
| synphasor.conf.pmu_elevation | PMU Elevation | Floating point (single-precision) | 3.2.0 to 3.4.0 |
| synphasor.conf.pmu_latitude | PMU Latitude | Floating point (single-precision) | 3.2.0 to 3.4.0 |
| synphasor.conf.pmu_longitude | PMU Longitude | Floating point (single-precision) | 3.2.0 to 3.4.0 |
| synphasor.conf.svc_class | Service class | Character string | 3.2.0 to 3.4.0 |
| synphasor.conf.timebase | Resolution of fractional second time stamp | Unsigned integer, 3 bytes | 1.2.0 to 3.4.0 |
| synphasor.conf.window | PM window length | Unsigned integer, 4 bytes | 3.2.0 to 3.4.0 |
| synphasor.conversion_factor | conversion factor | Unsigned integer, 4 bytes | 2.0.0 to 3.4.0 |
| synphasor.data | Data | Sequence of bytes | 2.0.0 to 3.4.0 |
| synphasor.data.CFGchange | Configuration changed | Boolean | 1.2.0 to 3.4.0 |
| synphasor.data.conf_frame | Dissected using configuration from frame | Frame number | 3.4.0 |
| synphasor.data.data_modified | Data modified indicator | Boolean | 3.2.0 to 3.4.0 |
| synphasor.data.pmu_tq | PMU Time Quality | Unsigned integer, 2 bytes | 3.2.0 to 3.4.0 |
| synphasor.data.PMUerror | PMU error | Boolean | 1.2.0 to 3.2.8 |
| synphasor.data.sorting | Data sorting | Boolean | 1.2.0 to 3.4.0 |
| synphasor.data.status | Data error | Unsigned integer, 2 bytes | 3.4.0 |
| synphasor.data.sync | Time synchronized | Boolean | 1.2.0 to 3.4.0 |
| synphasor.data.t_unlock | Unlocked time | Unsigned integer, 2 bytes | 1.2.0 to 3.4.0 |
| synphasor.data.trigger | Trigger detected | Boolean | 1.2.0 to 3.4.0 |
| synphasor.data.trigger_reason | Trigger reason | Unsigned integer, 2 bytes | 1.2.0 to 3.4.0 |
| synphasor.data.unknown | Unknown data | Sequence of bytes | 2.0.0 to 3.4.0 |
| synphasor.data.valid | Data valid | Boolean | 1.2.0 to 3.2.8 |
| synphasor.data_error | Data Error flag set | Label | 3.4.0 |
| synphasor.digital_status_word | Digital status word | Unsigned integer, 2 bytes | 2.0.0 to 3.4.0 |
| synphasor.extended_frame_data | Extended frame data | Sequence of bytes | 2.0.0 to 3.4.0 |
| synphasor.extended_frame_data.unaligned | Size not multiple of 16-bit word | Label | 2.0.0 to 3.4.0 |
| synphasor.factor_for_analog_value | Factor for analog value | Unsigned integer, 4 bytes | 2.0.0 to 3.4.0 |
| synphasor.fracsec | Fraction of second (raw) | Unsigned integer, 3 bytes | 1.2.0 to 3.2.8 |
| synphasor.fracsec_ms | Fraction of second | Floating point (single-precision) | 3.4.0 |
| synphasor.fracsec_raw | Fraction of second (raw) | Unsigned integer, 3 bytes | 3.4.0 |
| synphasor.frequency_deviation_from_nominal | Frequency deviation from nominal | Signed integer, 2 bytes | 2.0.0 to 3.4.0 |
| synphasor.frsize | Framesize | Unsigned integer, 2 bytes | 1.2.0 to 3.4.0 |
| synphasor.frtype | Frame Type | Unsigned integer, 2 bytes | 1.2.0 to 3.4.0 |
| synphasor.gpmuid | Global PMU ID (raw hex bytes) | Sequence of bytes | 3.2.0 to 3.4.0 |
| synphasor.idcode | PMU/PDC ID number | Unsigned integer, 2 bytes | 1.2.0 to 3.2.8 |
| synphasor.idcode_data_source | PMU/DC ID number (Data source ID) | Unsigned integer, 2 bytes | 3.4.0 |
| synphasor.idcode_stream_source | PMU/DC ID number (Stream source ID) | Unsigned integer, 2 bytes | 3.4.0 |
| synphasor.num_analog_values | Number of analog values | Unsigned integer, 2 bytes | 2.0.0 to 3.4.0 |
| synphasor.num_digital_status_words | Number of digital status words | Unsigned integer, 2 bytes | 2.0.0 to 3.4.0 |
| synphasor.num_phasors | Number of phasors | Unsigned integer, 2 bytes | 2.0.0 to 3.4.0 |
| synphasor.phasor | Phasor | Character string | 2.0.0 to 3.4.0 |
| synphasor.pmu_not_sync | PMU not sync flag set | Label | 3.4.0 |
| synphasor.rate_change_frequency | Rate of change of frequency | Floating point (single-precision) | 2.0.0 to 3.4.0 |
| synphasor.rate_of_transmission | Rate of transmission | Signed integer, 2 bytes | 2.0.0 to 3.4.0 |
| synphasor.soc | SOC time stamp | Date and time | 1.2.0 to 3.4.0 |
| synphasor.station_name | Station name | Character string | 3.2.0 to 3.4.0 |
| synphasor.station_name_len | Station name length | Unsigned integer, 1 byte | 3.2.0 to 3.4.0 |
| synphasor.status_word_mask.normal_state | Normal state | Unsigned integer, 2 bytes | 2.0.0 to 3.4.0 |
| synphasor.status_word_mask.valid_bits | Valid bits | Unsigned integer, 2 bytes | 2.0.0 to 3.4.0 |
| synphasor.sync | Synchronization word | Unsigned integer, 2 bytes | 1.2.0 to 3.4.0 |
| synphasor.timeqal.lsdir | Leap second direction | Boolean | 1.2.0 to 3.4.0 |
| synphasor.timeqal.lsocc | Leap second occurred | Boolean | 1.2.0 to 3.4.0 |
| synphasor.timeqal.lspend | Leap second pending | Boolean | 1.2.0 to 3.4.0 |
| synphasor.timeqal.timequalindic | Message Time Quality indicator code | Unsigned integer, 1 byte | 1.2.0 to 3.4.0 |
| synphasor.version | Version | Unsigned integer, 2 bytes | 1.2.0 to 3.4.0 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance