Display Filter Reference: NXP PN532 HCI
Protocol field name: pn532_hci
Versions: 1.12.0 to 3.4.3
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| pn532_hci.data_checksum | Data Checksum | Unsigned integer, 1 byte | 1.12.0 to 3.4.3 |
| pn532_hci.data_checksum.status | Data Checksum Status | Unsigned integer, 1 byte | 2.4.0 to 3.4.3 |
| pn532_hci.expert.invalid_data_checksum | Invalid Data Checksum | Label | 1.12.0 to 3.4.3 |
| pn532_hci.expert.invalid_length_checksum | Invalid Length Checksum | Label | 1.12.0 to 3.4.3 |
| pn532_hci.extended_length | Extended Length | Unsigned integer, 2 bytes | 1.12.0 to 3.4.3 |
| pn532_hci.ignored | Ignored | Sequence of bytes | 1.12.0 to 3.4.3 |
| pn532_hci.length | Length | Unsigned integer, 1 byte | 1.12.0 to 3.4.3 |
| pn532_hci.length_checksum | Length Checksum | Unsigned integer, 1 byte | 1.12.0 to 3.4.3 |
| pn532_hci.length_checksum.status | Length Checksum Status | Unsigned integer, 1 byte | 2.4.0 to 3.4.3 |
| pn532_hci.packet_code | Packet Code | Unsigned integer, 2 bytes | 1.12.0 to 3.4.3 |
| pn532_hci.postamble | Postamble | Sequence of bytes | 1.12.0 to 3.4.3 |
| pn532_hci.preamble | Preamble | Sequence of bytes | 1.12.0 to 3.4.3 |
| pn532_hci.specific_application_level_error_code | Specific Application Level Error Code | Unsigned integer, 1 byte | 1.12.0 to 3.4.3 |
| pn532_hci.start_code | Start Code | Unsigned integer, 2 bytes | 1.12.0 to 3.4.3 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance