Display Filter Reference: NetBIOS over IPX
Protocol field name: nbipx
Versions: 1.0.0 to 3.4.3
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| nmpi.conn_control | Connection control | Unsigned integer, 1 byte | 1.10.0 to 3.4.3 |
| nmpi.conn_control.ack | Acknowledgement | Boolean | 1.10.0 to 3.4.3 |
| nmpi.conn_control.attention | Attention | Boolean | 1.10.0 to 3.4.3 |
| nmpi.conn_control.end_msg | End of message | Boolean | 1.10.0 to 3.4.3 |
| nmpi.conn_control.resend | Resend | Boolean | 1.10.0 to 3.4.3 |
| nmpi.conn_control.sys_packet | Packet | Boolean | 1.10.0 to 3.4.3 |
| nmpi.ipx_network | IPX Network | IPX network number | 2.0.0 to 3.4.3 |
| nmpi.messageid | Message ID | Unsigned integer, 2 bytes | 2.0.0 to 3.4.3 |
| nmpi.name_flags | Name type flag | Unsigned integer, 1 byte | 1.10.0 to 3.4.3 |
| nmpi.name_flags.deregistered | Deregistered | Boolean | 1.10.0 to 3.4.3 |
| nmpi.name_flags.duplicated | Duplicated | Boolean | 1.10.0 to 3.4.3 |
| nmpi.name_flags.group | Name | Boolean | 1.10.0 to 3.4.3 |
| nmpi.name_flags.in_use | In use | Boolean | 1.10.0 to 3.4.3 |
| nmpi.name_flags.registered | Registered | Boolean | 1.10.0 to 3.4.3 |
| nmpi.name_type | Name Type | Unsigned integer, 1 byte | 2.0.0 to 3.4.3 |
| nmpi.opcode | Opcode | Unsigned integer, 1 byte | 2.0.0 to 3.4.3 |
| nmpi.packettype | Packet Type | Unsigned integer, 1 byte | 1.10.0 to 3.4.3 |
| nmpi.session.bytes_received | Bytes received | Unsigned integer, 2 bytes | 1.10.0 to 3.4.3 |
| nmpi.session.data_length | Data length | Unsigned integer, 2 bytes | 1.10.0 to 3.4.3 |
| nmpi.session.dest_conn_id | Destination connection ID | Unsigned integer, 2 bytes | 1.10.0 to 3.4.3 |
| nmpi.session.offset | Offset | Unsigned integer, 2 bytes | 1.10.0 to 3.4.3 |
| nmpi.session.recv_seq_number | Receive sequence number | Unsigned integer, 2 bytes | 1.10.0 to 3.4.3 |
| nmpi.session.send_seq_number | Send sequence number | Unsigned integer, 2 bytes | 1.10.0 to 3.4.3 |
| nmpi.session.src_conn_id | Source connection ID | Unsigned integer, 2 bytes | 1.10.0 to 3.4.3 |
| nmpi.session.total_data_length | Total data length | Unsigned integer, 2 bytes | 1.10.0 to 3.4.3 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance