Display Filter Reference: Locator/ID Separation Protocol (Data)
Protocol field name: lisp-data
Versions: 1.6.0 to 3.2.5
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| lisp-data.dstmapver | Destination Map-Version | Unsigned integer, 3 bytes | 1.6.0 to 3.2.5 |
| lisp-data.flags | Flags | Unsigned integer, 1 byte | 1.6.0 to 3.2.5 |
| lisp-data.flags.en_invalid | Invalid flag combination: if E is set, N MUST be set | Label | 1.12.0 to 3.2.5 |
| lisp-data.flags.enr | E bit (Echo-Nonce-Request) | Boolean | 1.6.0 to 3.2.5 |
| lisp-data.flags.iid | I bit (Instance ID present) | Boolean | 1.6.0 to 3.2.5 |
| lisp-data.flags.lsb | L bit (Locator-Status-Bits field enabled) | Boolean | 1.6.0 to 3.2.5 |
| lisp-data.flags.mv | V bit (Map-Version present) | Boolean | 1.6.0 to 3.2.5 |
| lisp-data.flags.nonce | N bit (Nonce present) | Boolean | 1.6.0 to 3.2.5 |
| lisp-data.flags.nv_invalid | Invalid flag combination: N and V can\'t be set both | Label | 1.12.0 to 3.2.5 |
| lisp-data.flags.res | Reserved | Unsigned integer, 1 byte | 1.6.0 to 3.2.5 |
| lisp-data.iid | Instance ID | Unsigned integer, 3 bytes | 1.6.0 to 3.2.5 |
| lisp-data.lsb | Locator-Status-Bits | Unsigned integer, 4 bytes | 1.6.0 to 3.2.5 |
| lisp-data.lsb8 | Locator-Status-Bits | Unsigned integer, 1 byte | 1.6.0 to 3.2.5 |
| lisp-data.mapver | Map-Version | Unsigned integer, 3 bytes | 1.6.0 to 3.2.5 |
| lisp-data.nonce | Nonce | Unsigned integer, 3 bytes | 1.6.0 to 3.2.5 |
| lisp-data.srcmapver | Source Map-Version | Unsigned integer, 3 bytes | 1.6.0 to 3.2.5 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance