Display Filter Reference: Cisco Auto-RP
Protocol field name: auto_rp
Versions: 1.0.0 to 3.4.4
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| auto_rp.group_num | Number of groups this RP maps to | Unsigned integer, 1 byte | 2.0.0 to 3.4.4 |
| auto_rp.group_prefix | Prefix | IPv4 address | 1.0.0 to 3.4.4 |
| auto_rp.holdtime | Holdtime | Unsigned integer, 2 bytes | 1.0.0 to 3.4.4 |
| auto_rp.mask_len | Mask length | Unsigned integer, 1 byte | 1.0.0 to 3.4.4 |
| auto_rp.pim_ver | Version | Unsigned integer, 1 byte | 1.0.0 to 3.4.4 |
| auto_rp.prefix_sign | Sign | Unsigned integer, 1 byte | 1.0.0 to 3.4.4 |
| auto_rp.reserved | Reserved | Unsigned integer, 4 bytes | 2.0.0 to 3.4.4 |
| auto_rp.rp_addr | RP address | IPv4 address | 1.0.0 to 3.4.4 |
| auto_rp.rp_count | RP count | Unsigned integer, 1 byte | 1.0.0 to 3.4.4 |
| auto_rp.trailing_junk | Trailing junk | Sequence of bytes | 2.0.0 to 3.4.4 |
| auto_rp.type | Packet type | Unsigned integer, 1 byte | 1.0.0 to 3.4.4 |
| auto_rp.version | Protocol version | Unsigned integer, 1 byte | 1.0.0 to 3.4.4 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance