https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=3251
Summary: Launch Error Message
Product: Wireshark
Version: 1.0.6
Platform: Macintosh
OS/Version: Mac OS X 10.5
Status: NEW
Severity: Major
Priority: Medium
Component: Wireshark
AssignedTo: wireshark-bugs@xxxxxxxxxxxxx
ReportedBy: morris.levy@xxxxxxxxx
CC: morris.levy@xxxxxxxxx
Created an attachment (id=2742)
--> (https://bugs.wireshark.org/bugzilla/attachment.cgi?id=2742)
Picture of error message.
Build Information:
Paste the COMPLETE build information from "Help->About Wireshark", "wireshark
-v", or "tshark -v".
--
"
The following errors were found while loading the MIBS:
-:0 1 module-not-found failed to locate MIB module `IP-MIB'
-:0 1 module-not-found failed to locate MIB module `IF-MIB'
-:0 1 module-not-found failed to locate MIB module `TCP-MIB'
-:0 1 module-not-found failed to locate MIB module `UDP-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMPv2-MIB'
-:0 1 module-not-found failed to locate MIB module `RFC1213-MIB'
-:0 1 module-not-found failed to locate MIB module `IPV6-ICMP-MIB'
-:0 1 module-not-found failed to locate MIB module `IPV6-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMP-COMMUNITY-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMP-FRAMEWORK-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMP-MPD-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMP-NOTIFICATION-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMP-PROXY-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMP-TARGET-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMP-USER-BASED-SM-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMP-USM-DH-OBJECTS-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMP-VIEW-BASED-ACM-MIB'
The Current Path is:
/usr/local/share/mibs/ietf:/usr/local/share/mibs/iana:/usr/local/share/mibs/irtf:/usr/local/share/mibs/site:/usr/local/share/mibs/tubs:/usr/local/share/pibs/ietf:/usr/local/share/pibs/site:/usr/local/share/pibs/tubs
"
---------------------------------------
Wireshark loads and boots up properly after an OS Software Update, but now upon
trying to launch an interface and loading the application, gives the above
error message. Program cannot run.
--
Configure bugmail: https://bugs.wireshark.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
