Hi everybody,
I am trying to debug some IPv6 communication between 2 devices (FreeBSD both), having a
Ethereal-enabled Win2000 (I tried both 0.9.6 and 0.9.7 and is the same behaviour). I just noticed
that the IPv6 addresses don't appear on the <capture> window. I tried ICMP, and Telnet, FTP and is
the same... However, if I select (highlight) the line that corresponds to the source or destination
address, I see that it highlights the address on the "raw" packet (the Hex info on the bottom). I
also notice the same on tethereal... Maybe a "printf" lost somewhere?
Seems like a "aesthetic" bug. But any patch/info would be appreciated. Overall, this is an
excellent application.
Thanks in advance,
Federico.
(Please, if you don't mind, please reply directly to me, cc: to the list... Thanks.)
PD: This is an example:
Frame 1 (251 on wire, 251 captured)
Arrival Time: Oct 9, 2002 16:00:12.702667000
Time delta from previous packet: 0.000000000 seconds
Time relative to first packet: 0.000000000 seconds
Frame Number: 1
Packet Length: 251 bytes
Capture Length: 251 bytes
Ethernet II
Destination: 00:90:27:79:50:a3 (Intel_79:50:a3)
Source: 00:90:27:79:4e:39 (Intel_79:4e:39)
Type: IPv6 (0x86dd)
Internet Protocol Version 6
Version: 6
Traffic class: 0x00
Flowlabel: 0x00000
Payload length: 197
Next header: TCP (0x06)
Hop limit: 64
Source address: <<< EMPTY, Hmmmm.. >>>
Destination address: <<< EMPTY, Hmmmm.. >>>
Transmission Control Protocol, Src Port: 3143 (3143), Dst Port: telnet (23), Seq: 3492476684, Ack:
2246818372, Len: 165
Source port: 3143 (3143)
Destination port: telnet (23)
Sequence number: 3492476684
Next sequence number: 3492476849
Acknowledgement number: 2246818372
Header length: 32 bytes
Flags: 0x0019 (FIN, PSH, ACK)
0... .... = Congestion Window Reduced (CWR): Not set
.0.. .... = ECN-Echo: Not set
..0. .... = Urgent: Not set
...1 .... = Acknowledgment: Set
.... 1... = Push: Set
.... .0.. = Reset: Not set
.... ..0. = Syn: Not set
.... ...1 = Fin: Set
Window size: 58547
Checksum: 0x38d6 (correct)
Options: (12 bytes)
NOP
NOP
Time stamp: tsval 49751370, tsecr 808551
Telnet
Suboption Begin: Authentication Option
Here's my Authentication Option
Value: \006\000\0001a442272b24e0831de79db727a4ce3aa1bc0927e49208d36
Command: Suboption End
Suboption Begin: Encryption Option
Send your Encryption Option
Command: Suboption End
Suboption Begin: Encryption Option
Send your Encryption Option
Command: Suboption End
Suboption Begin: Negotiate About Window Size
Here's my Negotiate About Window Size
Value: P\000\030
Command: Suboption End
Suboption Begin: Linemode
Send your Linemode
Data: \022\000
Command: Suboption End
Command: Do Suppress Go Ahead
Data: \r\000
Data: \b\b\b\b\b\003\b\b\b\b\b\b\b\b\033\b\033\b\b\b\r\000
Data: \003\003
0000 00 90 27 79 50 a3 00 90 27 79 4e 39 86 dd 60 00 ..'yP...'yN9..`.
0010 00 00 00 c5 06 40 20 01 XX XX XX XX XX 50 00 00 .....@ ......P.. << Here's the info...
0020 00 00 00 00 00 01 20 01 XX XX XX XX XX 50 00 00 ...... ......P.. << Here's the info...
0030 00 00 00 00 00 10 0c 47 00 17 d0 2a f7 0c 85 eb .......G...*.... (XX for confidentiality)
0040 ba 44 80 19 e4 b3 38 d6 00 00 01 01 08 0a 02 f7 .D....8.........
0050 25 4a 00 0c 56 67 ff fa 25 00 06 00 00 31 61 34 %J..Vg..%....1a4
0060 34 32 32 37 32 62 32 34 65 30 38 33 31 64 65 37 42272b24e0831de7
0070 39 64 62 37 32 37 61 34 63 65 33 61 61 31 62 63 9db727a4ce3aa1bc
0080 30 39 32 37 65 34 39 32 30 38 64 33 36 ff f0 ff 0927e49208d36...
0090 fa 26 05 ff f0 ff fa 26 01 01 02 ff f0 ff fa 1f .&.....&........
00a0 00 50 00 18 ff f0 ff fa 22 03 01 03 00 03 62 03 .P......".....b.
00b0 04 02 0f 05 02 14 07 62 1c 08 02 04 09 42 1a 0a .......b.....B..
00c0 02 7f 0b 02 15 0c 02 17 0d 02 12 0e 02 16 0f 02 ................
00d0 11 10 02 13 11 00 ff ff 12 00 ff ff ff f0 ff fd ................
00e0 03 0d 00 08 08 08 08 08 03 08 08 08 08 08 08 08 ................
00f0 08 1b 08 1b 08 08 08 0d 00 03 03 ...........
