This means that WinPcap is properly installed.
Are you sure the NICs are connected to the proper ports on the hub?
GV
--------------------------------------------------
From: <mike@xxxxxxxxxxxx>
Sent: Thursday, May 13, 2010 5:01 PM
To: "wireshark-users" <wireshark-users@xxxxxxxxxxxxx>
Subject: Re: [Wireshark-users] One NIC on public side
On Thu, 13 May 2010 16:54:43 -0700, Gianluca Varenni wrote:
WinPcap does not show in the list of protocols of the NIC. Do the NICs
get
listed in Wireshark?
Never had this problem before but then, never installed it on a 64bit
server either. Maybe that's related?
Yes, both nics show up in the list that wireshark can see.
I have nic0 connected to the lan and nic1 is connected into that hub which
should be pre-firewall traffic but it sees nothing at all for packets.
In the wireshark list, it shows up at the proper driver with IP unknown of
course.
___________________________________________________________________________
Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives: http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
