Wireshark · Ethereal-users: Re: [Ethereal-users] One-Way Capture 0.9.5

[Steve Currie <curries@xxxxxxxxxxx>]

I've done a little more investigation.  I downloaded 0.9.6 and found the
same issue can be replicated.  The problem can be replicated on yet one more
PC using a Cisco Aironet card.  I connected the first PC directly to a
switched Ethernet segment and the tracing worked correctly - I could see
both inbound and outbound traffic.  Does Ethereal and winPcap only support
Ethernet interfaces?

----- Original Message -----
From: "Steve Currie" <curries@xxxxxxxxxxx>
To: <ethereal-users@xxxxxxxxxxxx>
Sent: Tuesday, August 20, 2002 10:28 PM
Subject: [Ethereal-users] One-Way Capture 0.9.5


> When I capture traffic I see only traffic destined for my NIC.  The
outbound
> requests do not appear.  I have no filters enabled.  I am using ethereal
> 0.9.5 on Win2K with winPcap 2.3 (latest non-beta version).  I observed the
> same behavior with 0.9.4 and 2.1.  I observed the same behavior on two
> different PCs with different NICs, media, etc.  The NICs were Compaq
PCMCIA
> token ring (not sure of exact model), IBM turbo 16/4 PCMCIA token ring,
and
> Cisco Aironet 350.  Any thoughts or ideas?
>
> _______________________________________________
> Ethereal-users mailing list
> Ethereal-users@xxxxxxxxxxxx
> http://www.ethereal.com/mailman/listinfo/ethereal-users