Display Filter Reference: ATM Cell
Protocol field name: mplspwatmcell
Versions: 1.4.0 to 4.2.5
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| atm | Length | Signed integer (32 bits) | 1.4.0 to 4.2.5 |
| atm | PW ATM cell is broken | Label | 1.12.0 to 4.2.5 |
| atm | Unknown value of PTI field in the ATM cell header | Label | 1.12.0 to 4.2.5 |
| atm | 1:1 mode: M bit must be 0 to distinguish from AAL5 PDU mode | Label | 1.12.0 to 4.2.5 |
| atm | Reserved bits in the 3rd byte of CW must be 0 | Label | 1.12.0 to 4.2.5 |
| atm | 1:1 VPC mode: V bit must be 1 to indicate that VCI is present | Label | 1.12.0 to 4.2.5 |
| atm | 1:1 VCC mode: V bit must be 0 to indicate that VCI is absent | Label | 1.12.0 to 4.2.5 |
| pw | ATM-specific byte of CW is fully dissected below | Label | 2.0.0 to 4.2.5 |
| pw | Bits 0..3 of Control Word must be 0 | Label | 1.12.0 to 4.2.5 |
| pw | Flags must be 0 for PW ATM N:1 encapsulation | Label | 1.12.0 to 4.2.5 |
| pw | Bad Length: must be 0 for this encapsulation | Label | 1.12.0 to 4.2.5 |
| pw | PW packet size too small | Label | 1.12.0 to 4.2.5 |
| pw | PW payload size invalid | Label | 1.12.0 to 4.2.5 |