Wireshark · Wireshark-users: [Wireshark-users] Wireshark 3.6.1 is now available

[Gerald Combs <gerald@xxxxxxxxxxxxx>]

I'm proud to announce the release of Wireshark 3.6.1.


 What is Wireshark?

  Wireshark is the world’s most popular network protocol analyzer. It is
  used for troubleshooting, analysis, development and education.

 What’s New

  Bug Fixes

   The following vulnerabilities have been fixed:

     • wnpa-sec-2021-17[1] RTMPT dissector infinite loop. Issue
       17745[2]. CVE-2021-4185[3].

     • wnpa-sec-2021-18[4] BitTorrent DHT dissector infinite loop. Issue
       17754[5]. CVE-2021-4184[6].

     • wnpa-sec-2021-19[7] pcapng file parser crash. Issue 17755[8].
       CVE-2021-4183[9].

     • wnpa-sec-2021-20[10] RFC 7468 file parser infinite loop. Issue
       17801[11]. CVE-2021-4182[12].

     • wnpa-sec-2021-21[13] Sysdig Event dissector crash.
       CVE-2021-4181[14].

     • wnpa-sec-2021-22[15] Kafka dissector infinite loop. Issue
       17811[16].

   The following bugs have been fixed:

     • Allow sub-second timestamps in hexdumps Issue 15562[17].

     • GRPC: An unnecessary empty Protobuf tree item is displayed if the
       GRPC message body length is 0 Issue 17675[18].

     • Can’t install "ChmodBPF.pkg" or "Add Wireshark to the system
       path.pkg" on M1 MacBook Air Monterey without Rosetta 2 Issue
       17757[19].

     • TECMP: LIN Payload is cut off by 1 byte Issue 17760[20].

     • Wireshark crashes if a 64 bit field of type BASE_CUSTOM is
       applied as a column Issue 17762[21].

     • Command line option "-o console.log.level" causes wireshark and
       tshark to exit on start Issue 17763[22].

     • Setting WIRESHARK_LOG_LEVEL=debug breaks interface capture Issue
       17764[23].

     • Unable to build without tshark Issue 17766[24].

     • IEEE 802.11 action frames are not getting parsed and always seen
       as malformed Issue 17767[25].

     • IEC 60870-5-101 link address field is 1 byte, but should have
       configurable length of 0,1 or 2 bytes Issue 17775[26].

     • dfilter: 'tcp.port not in {1}' crashes Wireshark Issue 17785[27].

  New and Updated Features

     • The 'console.log.level' preference was removed in Wireshark
       3.6.0. This release adds an '-o console.log.level:'
       backward-compatibilty option on the CLI that maps to the new
       logging sub-system. Note that this does not have bitmask
       semantics and does not correspond to any actual preference. It is
       just a transition mechanism for users that were relying on this
       CLI option and will be removed in the future. To see the new
       diagnostic output options consult the manpages or the output of
       '--help'.

  New Protocol Support

   There are no new protocols in this release.

  Updated Protocol Support

   ANSI A I/F, AT, BitTorrent DHT, FF, GRPC, IEC 101/104, IEEE 802.11,
   IEEE 802.11 Radiotap, IPsec, Kafka, QUIC, RTMPT, RTSP, SRVLOC, Sysdig
   Event, and TECMP

  New and Updated Capture File Support

   BLF and RFC 7468

  New File Format Decoding Support

   There is no new or updated file format support in this release.

 Getting Wireshark

  Wireshark source code and installation packages are available from
  https://www.wireshark.org/download.html.

  Vendor-supplied Packages

   Most Linux and Unix vendors supply their own Wireshark packages. You
   can usually install or upgrade Wireshark using the package management
   system specific to that platform. A list of third-party packages can
   be found on the download page[28] on the Wireshark web site.

 File Locations

  Wireshark and TShark look in several different locations for
  preference files, plugins, SNMP MIBS, and RADIUS dictionaries. These
  locations vary from platform to platform. You can use Help › About
  Wireshark › Folders or tshark -G folders to find the default locations
  on your system.

 Getting Help

  The User’s Guide, manual pages and various other documentation can be
  found at https://www.wireshark.org/docs/

  Community support is available on Wireshark’s Q&A site[29] and on the
  wireshark-users mailing list. Subscription information and archives
  for all of Wireshark’s mailing lists can be found on the web site[30].

  Bugs and feature requests can be reported on the issue tracker[31].

 Frequently Asked Questions

  A complete FAQ is available on the Wireshark web site[32].

  Last updated 2021-12-29 19:11:55 UTC

 References

   1. https://www.wireshark.org/security/wnpa-sec-2021-17
   2. https://gitlab.com/wireshark/wireshark/-/issues/17745
   3. https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2021-4185
   4. https://www.wireshark.org/security/wnpa-sec-2021-18
   5. https://gitlab.com/wireshark/wireshark/-/issues/17754
   6. https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2021-4184
   7. https://www.wireshark.org/security/wnpa-sec-2021-19
   8. https://gitlab.com/wireshark/wireshark/-/issues/17755
   9. https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2021-4183
  10. https://www.wireshark.org/security/wnpa-sec-2021-20
  11. https://gitlab.com/wireshark/wireshark/-/issues/17801
  12. https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2021-4182
  13. https://www.wireshark.org/security/wnpa-sec-2021-21
  14. https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2021-4181
  15. https://www.wireshark.org/security/wnpa-sec-2021-22
  16. https://gitlab.com/wireshark/wireshark/-/issues/17811
  17. https://gitlab.com/wireshark/wireshark/-/issues/15562
  18. https://gitlab.com/wireshark/wireshark/-/issues/17675
  19. https://gitlab.com/wireshark/wireshark/-/issues/17757
  20. https://gitlab.com/wireshark/wireshark/-/issues/17760
  21. https://gitlab.com/wireshark/wireshark/-/issues/17762
  22. https://gitlab.com/wireshark/wireshark/-/issues/17763
  23. https://gitlab.com/wireshark/wireshark/-/issues/17764
  24. https://gitlab.com/wireshark/wireshark/-/issues/17766
  25. https://gitlab.com/wireshark/wireshark/-/issues/17767
  26. https://gitlab.com/wireshark/wireshark/-/issues/17775
  27. https://gitlab.com/wireshark/wireshark/-/issues/17785
  28. https://www.wireshark.org/download.html
  29. https://ask.wireshark.org/
  30. https://www.wireshark.org/lists/
  31. https://gitlab.com/wireshark/wireshark/-/issues
  32. https://www.wireshark.org/faq.html


Digests

wireshark-3.6.1.tar.xz: 39632140 bytes
SHA256(wireshark-3.6.1.tar.xz)=0434eda8fb6bf88e2b42a67eb5d1de254a67d505bec3bb51fee9d7cad7925a38
RIPEMD160(wireshark-3.6.1.tar.xz)=04bf556bcb1313b323cfcd1fbee2df281a7de4db
SHA1(wireshark-3.6.1.tar.xz)=ce592bc9b71491793cfe0b6c456727a4be04b805

Wireshark-win64-3.6.1.exe: 77397160 bytes
SHA256(Wireshark-win64-3.6.1.exe)=1bec695388724ce8d40d0403b150706daa9991e088d240779b9b16e60241ec31
RIPEMD160(Wireshark-win64-3.6.1.exe)=b8b37fc0a80855f1e09da1d80336d1b6d1da83b0
SHA1(Wireshark-win64-3.6.1.exe)=0f3d9c8729c016952a56aa883255a1f367d343f7

Wireshark-win32-3.6.1.exe: 61293672 bytes
SHA256(Wireshark-win32-3.6.1.exe)=f2a315f304156b7b0874ce6971a3c526264b35f515f58f27b622f9509cfcd26c
RIPEMD160(Wireshark-win32-3.6.1.exe)=3e74e0f8aeb8cb69fd141782624348f320c7eaa6
SHA1(Wireshark-win32-3.6.1.exe)=c98c38ccc0cfc0bb1a129c8f4477560801574b7d

Wireshark-win32-3.6.1.msi: 45436928 bytes
SHA256(Wireshark-win32-3.6.1.msi)=177fd53740429ec3887d62efa99bb28d17fe9454899fcab447b3beaf04013d7c
RIPEMD160(Wireshark-win32-3.6.1.msi)=bc38e5acfec61ec15aa2b41bd02c3cc4c166afc8
SHA1(Wireshark-win32-3.6.1.msi)=41a5364ff473373bf8c512f1e9b96e604af39b1d

Wireshark-win64-3.6.1.msi: 50946048 bytes
SHA256(Wireshark-win64-3.6.1.msi)=c2b32b5ba00caa9168b32f19ffbcfd9ce351c379661533a4096ae0b063550131
RIPEMD160(Wireshark-win64-3.6.1.msi)=f6b049eeb306b991787c5ba9c7f1aaeef30573e9
SHA1(Wireshark-win64-3.6.1.msi)=f3b1c81a5e772ae1b32f45e3c9896d7d2e1a19b8

WiresharkPortable32_3.6.1.paf.exe: 39516080 bytes
SHA256(WiresharkPortable32_3.6.1.paf.exe)=0dc6b9a6604f1d6bfe9b2d290db13e3d87615d6e402f3ff252c0b025ac367a1c
RIPEMD160(WiresharkPortable32_3.6.1.paf.exe)=2c4e0d90d1a508a3c607e774871fc1910ee0ee3c
SHA1(WiresharkPortable32_3.6.1.paf.exe)=b41711ae3731ae0842808af9a3afc56cad1abe04

WiresharkPortable64_3.6.1.paf.exe: 44267152 bytes
SHA256(WiresharkPortable64_3.6.1.paf.exe)=feb2594c9aa564b04cacf078e9ca56642ace29a82215d5916b89ca3ae4039cf7
RIPEMD160(WiresharkPortable64_3.6.1.paf.exe)=946fb7ef1542d6658e3c068c77938e16dbf40425
SHA1(WiresharkPortable64_3.6.1.paf.exe)=3486ed5f3ca9d519ea8178736347283be8cc43d7

Wireshark 3.6.1 Arm 64.dmg: 140000615 bytes
SHA256(Wireshark 3.6.1 Arm 64.dmg)=878bd09f9bfb6e058e37020902eea92d3111480b4db3114357219042ff126fde
RIPEMD160(Wireshark 3.6.1 Arm 64.dmg)=8ed0977c4ca561c813d25d59a5ee3d00dbbaffee
SHA1(Wireshark 3.6.1 Arm 64.dmg)=a3b8a53e4c770f6377208c169c2933de328a347b

Wireshark 3.6.1 Intel 64.dmg: 138727831 bytes
SHA256(Wireshark 3.6.1 Intel 64.dmg)=f348d9fc1f67f4bf75aef3c45aca864dfc9b43cac488b86af8a7b85c671eb46e
RIPEMD160(Wireshark 3.6.1 Intel 64.dmg)=d592e1a3c45d7d445d3991218b2cae3a11ecd76a
SHA1(Wireshark 3.6.1 Intel 64.dmg)=b04a11c42674b34c2c9a690db0fb92c4bfab761f

You can validate these hashes using the following commands (among others):

    Windows: certutil -hashfile Wireshark-win64-x.y.z.exe SHA256
    Linux (GNU Coreutils): sha256sum wireshark-x.y.z.tar.xz
    macOS: shasum -a 256 "Wireshark x.y.z Arm 64.dmg"
    Other: openssl sha256 wireshark-x.y.z.tar.xz

Attachment: OpenPGP_signature
Description: OpenPGP digital signature