Huge thanks to our Platinum Members Endace and LiveAction,
and our Silver Member Veeam, for supporting the Wireshark Foundation and project.

Wireshark-users: Re: [Wireshark-users] Decode data layer by a Wireshark supported protocol

Date Prev · Date Next · Thread Prev · Thread Next
From: Savakh S <sovakah@xxxxxxxxx>
Date: Fri, 29 Sep 2017 07:41:34 +0000
I'm not sure it's modbus but I'd like to decode it as modbus to see if it's properly decoded. Is there a way to achieve this ?

Le ven. 29 sept. 2017 à 01:30, Guy Harris <guy@xxxxxxxxxxxx> a écrit :
On Sep 28, 2017, at 2:21 PM, Savakh S <sovakah@xxxxxxxxx> wrote:

> I have 802.15.4 packets with a data layer above.

"Above" as in "the link layer is 802.15.4, and the protocol running atop 802.15.4 is the data layer"?

I.e., the "Data Payload" of an 802.15.4 Data frame is a Modbus PDU of some sort?

> But modbus isn't proposed when I right click and choose "decode as".

That's because there's no Modbus dissector that registers itself as being usable atop 802.15.4.

So are these Modbus RTU PDUs, beginning with a unit ID byte, followed by a function code byte, followed by the data?
___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives:    https://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-users
             mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe