On Tue, Jan 20, 2015 at 12:25 AM, Rayne <hjazz6@xxxxxxxxx> wrote:
>
> Is the "-E occurrence=f" option only available for certain versions of
> tshark? I just tried it and I got the error message:
>
> "occurrence" is not a valid field output option=pair.
> The available options for field output "E" are:
> header=y|n Print field abbreviations as first line of output (def: N: no)
> separator=/t|/s|<character> Set the separator to ise; "/t" = tab, "/s" =
> space (def: /t: tab)
> quote=d|s|n Print either d: double-quotes, s: single-quotes or n: no
> quotes around field values (def: n: none)
>
> I'm using tshark 1.2.15.
Version 1.2 is ancient and no longer supported. If I recall correctly,
the '-E occurrence' flag was added in either 1.4 or 1.6, but both of
those are also end-of-life. I recommend upgrading to at least 1.10 if
at all possible.
Evan
> Thank you.
>
> Regards,
> Rayne
>
>
>
>
> ________________________________
> From: Sake Blok <sake@xxxxxxxxxx>
> To: Rayne <hjazz6@xxxxxxxxx>; Community support list for Wireshark
> <wireshark-users@xxxxxxxxxxxxx>
> Sent: Monday, January 19, 2015 10:03 PM
> Subject: Re: [Wireshark-users] Extracting outer MAC Address
>
> You can make tshark print only the outer mac-address with :
>
> tshark -r file.pcap -T fields -E occurrence=f -e eth.src -w output.pcap
>
> BTW, using -w output.pcap will save the packets in binary form to
> output.pcap . If you want to save the list of mac-addresses, you should use:
>
> tshark -r file.pcap -T fields -E occurrence=f -e eth.src > output.txt
>
>
> From "tshark -h":
>
> -e <field> field to print if -Tfields selected (e.g.
> tcp.port,
> _ws.col.Info)
> this option can be repeated to print multiple
> fields
> -E<fieldsoption>=<value> set options for output when -Tfields selected:
> header=y|n switch headers on and off
> separator=/t|/s|<char> select tab, space, printable character as
> separator
> occurrence=f|l|a print first, last or all occurrences of each field
> aggregator=,|/s|<char> select comma, space, printable character as
> aggregator
> quote=d|s|n select double, single, no quotes for values
>
> Cheers,
> Sake
>
>
> On 19 jan 2015, at 09:16, Rayne wrote:
>
>> I realized that the tshark command actually extracts both MAC addresses,
>> and because I know what the outer MAC address should look like (OUI), I can
>> essentially get the outer MAC address by doing a grep. Thanks for the
>> suggestions, Jim and Guy!
>>
>> From: Jim Young <jyoung@xxxxxxx>
>> To: Rayne <hjazz6@xxxxxxxxx>; Community support list for Wireshark
>> <wireshark-users@xxxxxxxxxxxxx>
>> Sent: Monday, January 19, 2015 3:35 PM
>> Subject: Re: [Wireshark-users] Extracting outer MAC Address
>>
>> Hello Rayne,
>>
>>
>>
>> On Monday, January 19, 2015 1:58 AM, Rayne <hjazz6@xxxxxxxxx> wrote:
>>
>> >I see 2 full Ethernet headers in Wireshark - Ethernet with Source/Dest
>> >MAC address, IPv4, EtherIP Version 4, Ethernet with Source/Dest address,
>> >802.1Q VLAN, IP.
>> >
>> >Wireshark can dissect it.
>>
>>
>> Is is possible to attach a small example capture file of what you are
>> looking at? One packet should do.
>>
>> Your description does not sound exactly like like the following, but there
>> are encapsulating protocols such as IEEE 802.1ah-2008, Provider Backbone
>> Bridge (http://en.wikipedia.org/wiki/IEEE_802.1ah-2008) that do MAC-in-MAC
>> style encapsulation.
>>
>>
>> Assuming Wireshark recognizes your packet as something like an IEEE
>> 802.1ah packet there might be a protocol specific display filter that
>> could get you the "outer" header's source mac value you seek.
>>
>> Regards,
>>
>> Jim Y.
>>
>>
>>
>>
>>
>>
>> ___________________________________________________________________________
>> Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
>> Archives: http://www.wireshark.org/lists/wireshark-users
>> Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
>>
>> mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
>
>
>
>
>
>
> ___________________________________________________________________________
> Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
> Archives: http://www.wireshark.org/lists/wireshark-users
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
> mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
>
>
>
> ___________________________________________________________________________
> Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
> Archives: http://www.wireshark.org/lists/wireshark-users
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
>
> mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
