Huge thanks to our Platinum Members Endace and LiveAction,
and our Silver Member Veeam, for supporting the Wireshark Foundation and project.

Wireshark-users: Re: [Wireshark-users] skew, delta and jitter in wireshark VOIP->analyse

From: nangergong <nangergong@xxxxxxxxx>
Date: Wed, 9 Feb 2011 16:37:00 +0000
thanks

BTW, when I use iLBC codec for audio VOIP calls, I noticed that the skew, delta and jitter shown in wireshark VOIP-Analysis GUI are all 0, what is the reason for this? Does this mean that wireshark can't analyze iLBC codec?





On Wed, Feb 9, 2011 at 2:04 PM, Anders Broman <anders.broman@xxxxxxxxxxxx> wrote:


-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Giles Coochey
Sent: den 9 februari 2011 14:48
To: wireshark-users@xxxxxxxxxxxxx
Subject: Re: [Wireshark-users] skew, delta and jitter in wireshark VOIP->analyse

On 09/02/2011 14:37, nangergong wrote:
>> Hi, all,
>>
>>   What is the difference between skew, delta and jitter in a voip stream?
>>
>>   I only know the impact of jitters on voip streams, what are the
>> impacts of skew and delta on VOIP streaming quality?
>>
>>   Thank you!
>Not sure if my understanding is correct... skew is absolute jitter based on comparison on the first packet(s).
>delta is what I understand to be latency, or delay.
>
>--
>Best Regards,
>
>Giles Coochey
See http://books.google.com/books?id=OM7YJAy9_m8C&pg=PA175&lpg=PA175&dq=RTP+skew&source=bl&ots=hUOESKrWB4&sig=F2cjXTyonrfi5R7pgKjuHRli4SA&hl=sv&ei=np1STe-PFIfLswbL7bjyBg&sa=X&oi=book_result&ct=result&resnum=10&ved=0CEQQ6AEwCQ#v=onepage&q=RTP%20skew&f=false




___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
            mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe