Your preferences config looks correct (it should be "http" NOT "https").
Two questions:
1. Does your capture contain the ENTIRE conversation (including the
Client Hello)?
2. Have you tried "Follow SSL Stream" instead of "Follow TCP Stream"?
Regards,
--
Doug Burks, GSE, CISSP
-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Al
Sent: Thursday, October 14, 2010 3:15 PM
To: wireshark-users@xxxxxxxxxxxxx
Subject: [Wireshark-users] need help with decrypting ssl messages
I followed a guide where I extracted
my private key and insert it into the SSL from wireshark preferences
like:
123.456.55.678,443,http,C:\testkey.pem
I tried both http and https - i thought since i am talking to server
in https it might be https? Anyway, both failed to decrypt (still see
jargon raw data when i view TCP stream.
The debug log gives me:
ssl_association_remove removing TCP 443 - http handle
03164D48
ssl_init keys string:
123.456.55.678,443,http,C:\testkey.pem
ssl_init found host entry
123.456.55.678,443,http,C:\testkey.pem
ssl_init addr '123.456.55.678' port '443' filename 'C:\testkey.pem'
password(only for p12 file) '(null)'
Private key imported: KeyID
01:31:a7:9e:fc:94:8b:08:2f:17:65:13:20:f9:d3:81:...
ssl_init private key file C:\testkey.pem successfully loaded
association_add TCP port 443 protocol http handle 03164D48
dissect_ssl enter frame #4 (first time)
ssl_session_init: initializing ptr 04E41BAC size 584
conversation = 04E41868, ssl_session = 04E41BAC
record: offset = 0, reported_length_remaining = 100
packet_from_server: is from server - FALSE ssl_find_private_key server
123.456.55.678:443 client random len: 32 padded to 32
dissect_ssl2_hnd_client_hello found CLIENT RANDOM -> state 0x01
........
So it seems the key has been found and loaded BUT when i check the
STOPPED TCP stream it is still all jargon... what am i doing wrong
here? thanks
I am pretty sure i am on the right server since the key is loaded and i
checked netstat and found the ip of the webservice... but still from
wire shark the client basically does handshake and cert check with
server and then afterwards server just sends "fin" and ends it....
really not sure whats going on here...
________________________________________________________________________
___
Sent via: Wireshark-users mailing list
<wireshark-users@xxxxxxxxxxxxx>
Archives: http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
