Hi Guy,
attached you'll find a sample capture taken with Microsoft Network Monitor
3.4.
Best Regards,
Stefaan
-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Guy Harris
Sent: donderdag 22 juli 2010 20:38
To: Community support list for Wireshark
Subject: Re: [Wireshark-users] network monitor 3.4 traces cannot be read
On Jul 22, 2010, at 10:23 AM, DePriest, Jason R. wrote:
> Why does the problem only affect the dev versions of Wireshark?
Because in 1.2.x, Wireshark ignored the per-packet encapsulation field in
newer file formats, whereas, in 1.3.x/1.4.x, it doesn't. There are some
files, and some packets, that can't be correctly handled if the per-packet
encapsulation field is ignored (e.g., the frames where NetMon stores
information about the capture).
Microsoft's documentation on the file format doesn't mention the possibility
of a frame type being 0, so either
1) the documentation is incomplete
or
2) there's a bug and the frame type is being fetched from the wrong
location.
We'd need a capture file to distinguish between 1) and 2) to test a fix.
(I'll ask Paul Long of the NetMon group if there's a case where, for
example, the per-packet type will be 0.)
___________________________________________________________________________
Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives: http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
Attachment:
NetMon34.cap
Description: Binary data
