I'm running version 1.2.7 64bit.
-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Jaap Keuter
Sent: Tuesday, May 11, 2010 11:29 AM
To: Community support list for Wireshark
Subject: Re: [Wireshark-users] The capture file appears to be damaged or corrupt. (pcap: Files has 109736-byte packet, bigger than maximum of 65535)
But what release of Wireshark are you using?
Thanks,
Jaap
Send from my iPhone
On 11 mei 2010, at 16:37, Joseph Laibach <jlaibach@xxxxxxxxxxxxx> wrote:
> I am having an issue with some of the capture files. Some captures
> files spit back an error that the capture file appears to be damaged
> or corrupt. The capture is running on a Windows 2003 Sever R2 64bit,
> with 2 gigs of memory and a Inetl Xeon 2.33ghz processor.
>
>
>
> I am capturing with dumpcap. The syntax I am using is as follows: C:
> \"Program Files"\Wireshark\dumpcap.exe -i \Device\NPF_
> {ECC9D35A-826A-4A4F-B634-656EAD4EC7C9} -w d:\SFTI_capture -b files:
> 10000 -a filesize:8192 -B 128 -s 10000000
>
>
>
> I added the –s 10000000 to try and fix the large byte packet issue b
> ut that hasn’t worked.
>
>
>
> Anyone have any suggestions on how to eliminated the corruption of
> capture files?
>
>
>
> Thanks
>
>
>
> Joe Laibach
>
>
>
>
> This communication is for informational purposes only. It is not
> intended as an offer or solicitation or as an official
> confirmation. Market prices and other information are not
> guaranteed as to completeness or accuracy and are subject to change
> without notice. Schonfeld Group reserves the right to monitor and
> review the content of all messages sent to or from this e-mail
> address.
> ___________________________________________________________________________
> Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx
> >
> Archives: http://www.wireshark.org/lists/wireshark-users
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
> mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
___________________________________________________________________________
Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives: http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
This communication is for informational purposes only. It is not intended as an offer or solicitation or as an official confirmation. Market prices and other information are not guaranteed as to completeness or accuracy and are subject to change without notice. Schonfeld Group reserves the right to monitor and review the content of all messages sent to or from this e-mail address.
