Wireshark · Wireshark-users: Re: [Wireshark-users] Question Regarding Connecting HUB and Wireshark

[dan meyer <dan@xxxxxxxxxxxxxxxx>]

You hub, while labeled and marketed as a hub, is likely actually a switch.

 

-- Dan Meyer

On Thu, Mar 25, 2010 at 1:15 PM, Spector, Paul <paul.spector@xxxxxxxx> wrote:

I have a Linksys 8 port HUB (Model EWHUB) with a BNC connection. I am attempting to connect the WireShark laptop to the hub to capture data from the BNC connection to the Ethernet connection. My problem is I never see data to the device that is connected to the HUB.

 

I welcome any advice you can provide.

 

Thank you!!

 

Respectfully,
Paul Spector
Systems Engineering
Lockheed Martin Mission Systems & Sensors
P.O. Box 4840, EP5-300, MD69
Syracuse, NY 13221-4840
Voice: 315-456-3916
Fax: 315-456-1601
Email: Paul.Spector@xxxxxxxx

 

___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
            mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe