Hi,
I got a problem about ANSI_MAP ASN.1 compile in
wireshark 1.2.1.
In wireshark ansi_map.asn file can’t
complie because it has some problems.
At the first, SignalQuality is as below but these are
ranging values in 2.240(p.550-310) of 3GPP2 spec X.S0004-550-E_v2.0_070723.
/////////////////////////////////////////////////////////////
Wireshark ansi_map.asn file
/////////////////////////////////////////////////////////////
-- 6.5.2.121
-- 1 0 0 0 1 0 1 1 (0x8b)(11)
SignalQuality ::= INTEGER{
not-a-usable-signal
(0),
treat-as-Not-a-usable-signal
(1),
treat-as-Not-a-usable-signal
(2),
treat-as-Not-a-usable-signal
(3),
treat-as-Not-a-usable-signal
(4),
treat-as-Not-a-usable-signal
(5),
treat-as-Not-a-usable-signal
(6),
treat-as-Not-a-usable-signal
(7),
treat-as-Not-a-usable-signal
(8),
usable-signal-range
(9),
usable-signal-range
(245),
treat-the-same-as-interference
(246),
treat-the-same-as-interference
(247),
treat-the-same-as-interference
(248),
treat-the-same-as-interference
(249),
treat-the-same-as-interference
(250),
treat-the-same-as-interference
(251),
treat-the-same-as-interference
(252),
treat-the-same-as-interference
(253),
treat-the-same-as-interference
(254),
interference
(255)
} (0..255)
/////////////////////////////////////////////////////////////
It should be change to like this..Just I guess.
/////////////////////////////////////////////////////////////
-- 6.5.2.121
-- 1 0 0 0 1 0 1 1 (0x8b)(11)
SignalQuality ::= INTEGER{
not-a-usable-signal
(0),
treat-as-Not-a-usable-signal
(1..8),
usable-signal-range
(9..245),
treat-the-same-as-interference
(246..254),
interference
(255)
} (0..255)
----------------------------------------------------------------
And the other problem is TriggerAddressList.
It is using a different name but has a same value
to 278 and thus it occurred to compile error.
-- 6.5.2.de
-- 1 0 1 1 1 1 1 1 (0xbf)
-- 1 0 0 0 0 0 1 0 (0x82)
-- 0 0 0 1 0 1 0 0 (0x14)(276)
TriggerAddressList ::= SET{
triggerList [278]
IMPLICIT TriggerList,
-- M
6.5.2.dg
triggerListOpt [278]
IMPLICIT TriggerList OPTIONAL
-- O
6.5.2.dg a
----------------------------------------------------------------
Please let me know about how can I complie it.
Thanks
H.R Choi.
From:
Anders Broman [mailto:anders.broman@xxxxxxxxxxxx]
Sent: Monday, August 31, 2009 11:20 PM
To: 최호룡;
Community support list for Wireshark
Subject: RE: [Wireshark-users] How
can decode the ANSI MAP over ITU-T SCCP andTCAP?
I don't think it's
possible currently. And I doubt that it's standardised how to do it.
Do you have a sample
trace to share so we can see how it's done?
From:
wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Horyong Choi
Sent: den 31 augusti 2009 07:25
To: 'Community support list for
Wireshark'
Subject: [Wireshark-users] How can
decode the ANSI MAP over ITU-T SCCP andTCAP?
Hi all,
Please let me know that the way of
decode of ANSI MAP in case of SCCP and TCAP is ITU-T spec.
Answer me please.
Thanks.
H.R. Choi
