I run on both xp and linux as host with no ip addresses defined on the
network card.
On windows just untick Internet Protocol TCP/ip and while your there ms
client and file print share don't hurt either
And linux
/etc/network/interfaces
iface ethX inet manual
up ifconfig $IFACE 0.0.0.0 up
where X is number of your network card.
-Chris
-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Oliver
Keller
Sent: 24 June 2009 11:06
To: Community support list for Wireshark
Subject: Re: [Wireshark-users] Wireshark 1.2 running and not running on
the same machine ?
Hi Jaap and all,
I followed that hint and found out :
All interfaces are connected (as seen in the table of network
connections)
- the physical interface is connected to a switch and the loopback are
connected anyway. Still the same error.
However :
All interfaces had IP addresses, EXCEPT the physical interface. I prefer
to
have the host out of the network and work with the guest machines only.
As
soon as I gave the physical NIC an arbitrary IP address, everything
worked
fine, no errors, no crashes !
Thanks to the list, you guys are great !
Later,
Oliver
________________________________________________________________________
___
Sent via: Wireshark-users mailing list
<wireshark-users@xxxxxxxxxxxxx>
Archives: http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
