Huge thanks to our Platinum Members Endace and LiveAction,
and our Silver Member Veeam, for supporting the Wireshark Foundation and project.

Wireshark-users: Re: [Wireshark-users] RTP over UDP not automatically detected

From: "Trevor Tolk" <TTolk@xxxxxxxxxxxx>
Date: Thu, 29 Nov 2007 13:58:38 -0800
I have a Toshiba phone system and I must manually tell it to decode the
UDP as RTP.  I haven't dried the 'Try to decode RTP outside of
conversation' option.

-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Jaap Keuter
Sent: 2007-11-29 10:45
To: Community support list for Wireshark
Subject: Re: [Wireshark-users] RTP over UDP not automatically detected

Hi,

...or you toggle the RTP preference "Try to decode RTP outside of
conversation" to true.

Thanx,
Jaap

maurizio simoni wrote:
> Hi,
> 
> RTP is not automatically detected over UDP.
> RTP is recognized only if SDP info is present in signaling messages 
> (for example SIP or SAP).
> If SDP is not present (this is the case of IPTV streams) the only way 
> to decode RTP is to manually set the UDP payload as RTP.
> 
> Same problem for RTCP.
> 
> Mau.
> 

_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users