Wireshark-users: [Wireshark-users] Configure problem with pcap_open_live
From: "Paulo Wilbert" <paulo.wilbert@xxxxxxxxx>
Date: Wed, 24 Oct 2007 10:28:08 -0200
Hi all,
I was not able to get Wireshark running. Configure report the following error:
...
checking for pkg-config... /aux/bin/pkg-config
checking for GTK+ - version >= 2.0.0... yes (version 2.10.13 )
checking for pkg-config... (cached) /aux/bin/pkg-config
checking for GLIB - version >= 2.0.0... yes (version 2.12.13)
checking whether GLib supports loadable modules... yes
checking for inttypes.h... (cached) yes
checking whether inttypes.h defines the PRI[doxu]64 macros... yes
checking for gethostbyname... yes
checking for connect... yes
checking whether to use libpcap for packet capture... yes
checking pcap.h usability... yes
checking pcap.h presence... yes
checking for pcap.h... yes
checking for pcap_open_live in -lpcap... no
checking for pcap_open_live in -lpcap with -lcfg -lodm... no
checking for pcap_open_live in -lpcap with -lpfring... no
configure: error: Can't link with library libpcap.
Resulting config.log was attached.
libpcap-0.9.8 was installed (at least ./configure, make and make install did not show errors). I used the directory /aux for all dependencies.
Any suggestion?
Rgds,
Paulo.
I was not able to get Wireshark running. Configure report the following error:
...
checking for pkg-config... /aux/bin/pkg-config
checking for GTK+ - version >= 2.0.0... yes (version 2.10.13 )
checking for pkg-config... (cached) /aux/bin/pkg-config
checking for GLIB - version >= 2.0.0... yes (version 2.12.13)
checking whether GLib supports loadable modules... yes
checking for inttypes.h... (cached) yes
checking whether inttypes.h defines the PRI[doxu]64 macros... yes
checking for gethostbyname... yes
checking for connect... yes
checking whether to use libpcap for packet capture... yes
checking pcap.h usability... yes
checking pcap.h presence... yes
checking for pcap.h... yes
checking for pcap_open_live in -lpcap... no
checking for pcap_open_live in -lpcap with -lcfg -lodm... no
checking for pcap_open_live in -lpcap with -lpfring... no
configure: error: Can't link with library libpcap.
Resulting config.log was attached.
libpcap-0.9.8 was installed (at least ./configure, make and make install did not show errors). I used the directory /aux for all dependencies.
Any suggestion?
Rgds,
Paulo.
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.61. Invocation command line was
$ ./configure --prefix=/aux --with-pcap=/usr
## --------- ##
## Platform. ##
## --------- ##
hostname = wilbert-desktop
uname -m = i686
uname -r = 2.6.17-12-generic
uname -s = Linux
uname -v = #2 SMP Sun Sep 23 22:56:28 UTC 2007
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = i686
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /aux/lib
PATH: /aux/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/bin/X11
PATH: /usr/games
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2171: checking build system type
configure:2189: result: i686-pc-linux-gnu
configure:2211: checking host system type
configure:2226: result: i686-pc-linux-gnu
configure:2248: checking target system type
configure:2263: result: i686-pc-linux-gnu
configure:2306: checking for a BSD-compatible install
configure:2362: result: /usr/bin/install -c
configure:2373: checking whether build environment is sane
configure:2416: result: yes
configure:2481: checking for gawk
configure:2511: result: no
configure:2481: checking for mawk
configure:2497: found /usr/bin/mawk
configure:2508: result: mawk
configure:2519: checking whether make sets $(MAKE)
configure:2540: result: yes
configure:2799: checking for gcc
configure:2815: found /usr/bin/gcc
configure:2826: result: gcc
configure:3064: checking for C compiler version
configure:3071: gcc --version >&5
gcc (GCC) 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3074: $? = 0
configure:3081: gcc -v >&5
Using built-in specs.
Target: i486-linux-gnu
Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --enable-checking=release i486-linux-gnu
Thread model: posix
gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)
configure:3084: $? = 0
configure:3091: gcc -V >&5
gcc: '-V' option must have argument
configure:3094: $? = 1
configure:3117: checking for C compiler default output file name
configure:3144: gcc conftest.c >&5
configure:3147: $? = 0
configure:3185: result: a.out
configure:3202: checking whether the C compiler works
configure:3212: ./a.out
configure:3215: $? = 0
configure:3232: result: yes
configure:3239: checking whether we are cross compiling
configure:3241: result: no
configure:3244: checking for suffix of executables
configure:3251: gcc -o conftest conftest.c >&5
configure:3254: $? = 0
configure:3278: result:
configure:3284: checking for suffix of object files
configure:3310: gcc -c conftest.c >&5
configure:3313: $? = 0
configure:3336: result: o
configure:3340: checking whether we are using the GNU C compiler
configure:3369: gcc -c conftest.c >&5
configure:3375: $? = 0
configure:3392: result: yes
configure:3397: checking whether gcc accepts -g
configure:3427: gcc -c -g conftest.c >&5
configure:3433: $? = 0
configure:3532: result: yes
configure:3549: checking for gcc option to accept ISO C89
configure:3623: gcc -c -g -O2 conftest.c >&5
configure:3629: $? = 0
configure:3652: result: none needed
configure:3681: checking for style of include used by make
configure:3709: result: GNU
configure:3737: checking dependency style of gcc
configure:3827: result: gcc3
configure:3849: checking how to run the C preprocessor
configure:3889: gcc -E conftest.c
configure:3895: $? = 0
configure:3926: gcc -E conftest.c
conftest.c:10:28: error: ac_nonexistent.h: No such file or directory
configure:3932: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "wireshark"
| #define VERSION "0.99.6"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:3965: result: gcc -E
configure:3994: gcc -E conftest.c
configure:4000: $? = 0
configure:4031: gcc -E conftest.c
conftest.c:10:28: error: ac_nonexistent.h: No such file or directory
configure:4037: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "wireshark"
| #define VERSION "0.99.6"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:4125: checking for a sed that does not truncate output
configure:4179: result: /bin/sed
configure:4182: checking for grep that handles long lines and -e
configure:4256: result: /bin/grep
configure:4261: checking for egrep
configure:4339: result: /bin/grep -E
configure:4355: checking for ld used by gcc
configure:4422: result: /usr/bin/ld
configure:4431: checking if the linker (/usr/bin/ld) is GNU ld
configure:4446: result: yes
configure:4451: checking for /usr/bin/ld option to reload object files
configure:4458: result: -r
configure:4476: checking for BSD-compatible nm
configure:4525: result: /usr/bin/nm -B
configure:4529: checking whether ln -s works
configure:4533: result: yes
configure:4540: checking how to recognise dependent libraries
configure:4716: result: pass_all
configure:4946: checking for ANSI C header files
configure:4976: gcc -c -g -O2 conftest.c >&5
configure:4982: $? = 0
configure:5081: gcc -o conftest -g -O2 conftest.c >&5
configure:5084: $? = 0
configure:5090: ./conftest
configure:5093: $? = 0
configure:5110: result: yes
configure:5134: checking for sys/types.h
configure:5155: gcc -c -g -O2 conftest.c >&5
configure:5161: $? = 0
configure:5177: result: yes
configure:5134: checking for sys/stat.h
configure:5155: gcc -c -g -O2 conftest.c >&5
configure:5161: $? = 0
configure:5177: result: yes
configure:5134: checking for stdlib.h
configure:5155: gcc -c -g -O2 conftest.c >&5
configure:5161: $? = 0
configure:5177: result: yes
configure:5134: checking for string.h
configure:5155: gcc -c -g -O2 conftest.c >&5
configure:5161: $? = 0
configure:5177: result: yes
configure:5134: checking for memory.h
configure:5155: gcc -c -g -O2 conftest.c >&5
configure:5161: $? = 0
configure:5177: result: yes
configure:5134: checking for strings.h
configure:5155: gcc -c -g -O2 conftest.c >&5
configure:5161: $? = 0
configure:5177: result: yes
configure:5134: checking for inttypes.h
configure:5155: gcc -c -g -O2 conftest.c >&5
configure:5161: $? = 0
configure:5177: result: yes
configure:5134: checking for stdint.h
configure:5155: gcc -c -g -O2 conftest.c >&5
configure:5161: $? = 0
configure:5177: result: yes
configure:5134: checking for unistd.h
configure:5155: gcc -c -g -O2 conftest.c >&5
configure:5161: $? = 0
configure:5177: result: yes
configure:5204: checking dlfcn.h usability
configure:5221: gcc -c -g -O2 conftest.c >&5
configure:5227: $? = 0
configure:5241: result: yes
configure:5245: checking dlfcn.h presence
configure:5260: gcc -E conftest.c
configure:5266: $? = 0
configure:5280: result: yes
configure:5308: checking for dlfcn.h
configure:5316: result: yes
configure:5387: checking for g++
configure:5417: result: no
configure:5387: checking for c++
configure:5417: result: no
configure:5387: checking for gpp
configure:5417: result: no
configure:5387: checking for aCC
configure:5417: result: no
configure:5387: checking for CC
configure:5417: result: no
configure:5387: checking for cxx
configure:5417: result: no
configure:5387: checking for cc++
configure:5417: result: no
configure:5387: checking for cl.exe
configure:5417: result: no
configure:5387: checking for FCC
configure:5417: result: no
configure:5387: checking for KCC
configure:5417: result: no
configure:5387: checking for RCC
configure:5417: result: no
configure:5387: checking for xlC_r
configure:5417: result: no
configure:5387: checking for xlC
configure:5417: result: no
configure:5445: checking for C++ compiler version
configure:5452: g++ --version >&5
./configure: line 5453: g++: command not found
configure:5455: $? = 127
configure:5462: g++ -v >&5
./configure: line 5463: g++: command not found
configure:5465: $? = 127
configure:5472: g++ -V >&5
./configure: line 5473: g++: command not found
configure:5475: $? = 127
configure:5478: checking whether we are using the GNU C++ compiler
configure:5507: g++ -c conftest.cpp >&5
./configure: line 5508: g++: command not found
configure:5513: $? = 127
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "wireshark"
| #define VERSION "0.99.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
|
| int
| main ()
| {
| #ifndef __GNUC__
| choke me
| #endif
|
| ;
| return 0;
| }
configure:5530: result: no
configure:5535: checking whether g++ accepts -g
configure:5565: g++ -c -g conftest.cpp >&5
./configure: line 5566: g++: command not found
configure:5571: $? = 127
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "wireshark"
| #define VERSION "0.99.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:5603: g++ -c conftest.cpp >&5
./configure: line 5604: g++: command not found
configure:5609: $? = 127
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "wireshark"
| #define VERSION "0.99.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:5642: g++ -c -g conftest.cpp >&5
./configure: line 5643: g++: command not found
configure:5648: $? = 127
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "wireshark"
| #define VERSION "0.99.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:5670: result: no
configure:5695: checking dependency style of g++
configure:5785: result: none
configure:6089: checking for g77
configure:6119: result: no
configure:6089: checking for xlf
configure:6119: result: no
configure:6089: checking for f77
configure:6119: result: no
configure:6089: checking for frt
configure:6119: result: no
configure:6089: checking for pgf77
configure:6119: result: no
configure:6089: checking for cf77
configure:6119: result: no
configure:6089: checking for fort77
configure:6119: result: no
configure:6089: checking for fl32
configure:6119: result: no
configure:6089: checking for af77
configure:6119: result: no
configure:6089: checking for xlf90
configure:6119: result: no
configure:6089: checking for f90
configure:6119: result: no
configure:6089: checking for pgf90
configure:6119: result: no
configure:6089: checking for pghpf
configure:6119: result: no
configure:6089: checking for epcf90
configure:6119: result: no
configure:6089: checking for gfortran
configure:6119: result: no
configure:6089: checking for g95
configure:6119: result: no
configure:6089: checking for xlf95
configure:6119: result: no
configure:6089: checking for f95
configure:6119: result: no
configure:6089: checking for fort
configure:6119: result: no
configure:6089: checking for ifort
configure:6119: result: no
configure:6089: checking for ifc
configure:6119: result: no
configure:6089: checking for efc
configure:6119: result: no
configure:6089: checking for pgf95
configure:6119: result: no
configure:6089: checking for lf95
configure:6119: result: no
configure:6089: checking for ftn
configure:6119: result: no
configure:6146: checking for Fortran 77 compiler version
configure:6153: --version >&5
./configure: line 6154: --version: command not found
configure:6156: $? = 127
configure:6163: -v >&5
./configure: line 6164: -v: command not found
configure:6166: $? = 127
configure:6173: -V >&5
./configure: line 6174: -V: command not found
configure:6176: $? = 127
configure:6184: checking whether we are using the GNU Fortran 77 compiler
configure:6203: -c conftest.F >&5
./configure: line 6204: -c: command not found
configure:6209: $? = 127
configure: failed program was:
| program main
| #ifndef __GNUC__
| choke me
| #endif
|
| end
configure:6226: result: no
configure:6232: checking whether accepts -g
configure:6249: -c -g conftest.f >&5
./configure: line 6250: -c: command not found
configure:6255: $? = 127
configure: failed program was:
| program main
|
| end
configure:6271: result: no
configure:6301: checking the maximum length of command line arguments
configure:6410: result: 32768
configure:6421: checking command to parse /usr/bin/nm -B output from gcc object
configure:6526: gcc -c -g -O2 conftest.c >&5
configure:6529: $? = 0
configure:6533: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' \> conftest.nm
configure:6536: $? = 0
configure:6588: gcc -o conftest -g -O2 conftest.c conftstm.o >&5
configure:6591: $? = 0
configure:6629: result: ok
configure:6633: checking for objdir
configure:6648: result: .libs
configure:6740: checking for ar
configure:6756: found /usr/bin/ar
configure:6767: result: ar
configure:6836: checking for ranlib
configure:6852: found /usr/bin/ranlib
configure:6863: result: ranlib
configure:6932: checking for strip
configure:6948: found /usr/bin/strip
configure:6959: result: strip
configure:7245: checking if gcc supports -fno-rtti -fno-exceptions
configure:7263: gcc -c -g -O2 -fno-rtti -fno-exceptions conftest.c >&5
cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C
configure:7267: $? = 0
configure:7280: result: no
configure:7295: checking for gcc option to produce PIC
configure:7505: result: -fPIC
configure:7513: checking if gcc PIC flag -fPIC works
configure:7531: gcc -c -g -O2 -fPIC -DPIC conftest.c >&5
configure:7535: $? = 0
configure:7548: result: yes
configure:7576: checking if gcc static flag -static works
configure:7604: result: yes
configure:7614: checking if gcc supports -c -o file.o
configure:7635: gcc -c -g -O2 -o out/conftest2.o conftest.c >&5
configure:7639: $? = 0
configure:7661: result: yes
configure:7687: checking whether the gcc linker (/usr/bin/ld) supports shared libraries
configure:8642: result: yes
configure:8663: checking whether -lc should be explicitly linked in
configure:8668: gcc -c -g -O2 conftest.c >&5
configure:8671: $? = 0
configure:8686: gcc -shared conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| grep -lc \>/dev/null 2\>\&1
configure:8689: $? = 0
configure:8701: result: no
configure:8709: checking dynamic linker characteristics
configure:9285: result: GNU/Linux ld.so
configure:9294: checking how to hardcode library paths into programs
configure:9319: result: immediate
configure:9333: checking whether stripping libraries is possible
configure:9338: result: yes
configure:9461: checking for shl_load
configure:9517: gcc -o conftest -g -O2 conftest.c >&5
/tmp/ccex2Ynm.o: In function `main':
/wireshark-0.99.6/conftest.c:55: undefined reference to `shl_load'
collect2: ld returned 1 exit status
configure:9523: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "wireshark"
| #define VERSION "0.99.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
| /* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
| For example, HP-UX 11i <limits.h> declares gettimeofday. */
| #define shl_load innocuous_shl_load
|
| /* System header to define __stub macros and hopefully few prototypes,
| which can conflict with char shl_load (); below.
| Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
| <limits.h> exists even on freestanding compilers. */
|
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
|
| #undef shl_load
|
| /* Override any GCC internal prototype to avoid an error.
| Use char because int might match the return type of a GCC
| builtin and then its argument prototype would still apply. */
| #ifdef __cplusplus
| extern "C"
| #endif
| char shl_load ();
| /* The GNU C library defines this for functions which it implements
| to always fail with ENOSYS. Some functions are actually named
| something starting with __ and the normal name is an alias. */
| #if defined __stub_shl_load || defined __stub___shl_load
| choke me
| #endif
|
| int
| main ()
| {
| return shl_load ();
| ;
| return 0;
| }
configure:9540: result: no
configure:9545: checking for shl_load in -ldld
configure:9580: gcc -o conftest -g -O2 conftest.c -ldld >&5
/usr/bin/ld: cannot find -ldld
collect2: ld returned 1 exit status
configure:9586: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "wireshark"
| #define VERSION "0.99.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
|
| /* Override any GCC internal prototype to avoid an error.
| Use char because int might match the return type of a GCC
| builtin and then its argument prototype would still apply. */
| #ifdef __cplusplus
| extern "C"
| #endif
| char shl_load ();
| int
| main ()
| {
| return shl_load ();
| ;
| return 0;
| }
configure:9604: result: no
configure:9609: checking for dlopen
configure:9665: gcc -o conftest -g -O2 conftest.c >&5
/tmp/ccUWfzjU.o: In function `main':
/wireshark-0.99.6/conftest.c:55: undefined reference to `dlopen'
collect2: ld returned 1 exit status
configure:9671: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "wireshark"
| #define VERSION "0.99.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
| /* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
| For example, HP-UX 11i <limits.h> declares gettimeofday. */
| #define dlopen innocuous_dlopen
|
| /* System header to define __stub macros and hopefully few prototypes,
| which can conflict with char dlopen (); below.
| Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
| <limits.h> exists even on freestanding compilers. */
|
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
|
| #undef dlopen
|
| /* Override any GCC internal prototype to avoid an error.
| Use char because int might match the return type of a GCC
| builtin and then its argument prototype would still apply. */
| #ifdef __cplusplus
| extern "C"
| #endif
| char dlopen ();
| /* The GNU C library defines this for functions which it implements
| to always fail with ENOSYS. Some functions are actually named
| something starting with __ and the normal name is an alias. */
| #if defined __stub_dlopen || defined __stub___dlopen
| choke me
| #endif
|
| int
| main ()
| {
| return dlopen ();
| ;
| return 0;
| }
configure:9688: result: no
configure:9693: checking for dlopen in -ldl
configure:9728: gcc -o conftest -g -O2 conftest.c -ldl >&5
configure:9734: $? = 0
configure:9752: result: yes
configure:9921: checking whether a program can dlopen itself
configure:9995: gcc -o conftest -g -O2 -DHAVE_DLFCN_H -Wl,--export-dynamic conftest.c -ldl >&5
configure: In function 'main':
configure:9991: warning: incompatible implicit declaration of built-in function 'exit'
configure:9998: $? = 0
configure:10016: result: yes
configure:10021: checking whether a statically linked program can dlopen itself
configure:10095: gcc -o conftest -g -O2 -DHAVE_DLFCN_H -Wl,--export-dynamic -static conftest.c -ldl >&5
configure: In function 'main':
configure:10091: warning: incompatible implicit declaration of built-in function 'exit'
/tmp/ccoHGjLL.o: In function `main':
/wireshark-0.99.6/configure:10079: warning: Using 'dlopen' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
configure:10098: $? = 0
/aux/lib/: cannot read file data: Is a directory
configure:10116: result: no
configure:10139: checking if libtool supports shared libraries
configure:10141: result: yes
configure:10144: checking whether to build shared libraries
configure:10165: result: yes
configure:10168: checking whether to build static libraries
configure:10172: result: no
configure:10264: creating libtool
configure:19351: checking for bison
configure:19367: found /usr/bin/bison
configure:19378: result: bison -y
configure:19394: checking for flex
configure:19410: found /usr/bin/flex
configure:19421: result: flex
configure:19458: flex conftest.l
configure:19461: $? = 0
configure:19463: checking lex output file root
configure:19479: result: lex.yy
configure:19484: checking lex library
configure:19503: gcc -o conftest -g -O2 conftest.c >&5
/tmp/ccAbEFGu.o: In function `input':
/wireshark-0.99.6/lex.yy.c:1133: undefined reference to `yywrap'
/tmp/ccAbEFGu.o: In function `yylex':
/wireshark-0.99.6/lex.yy.c:840: undefined reference to `yywrap'
/tmp/ccAbEFGu.o: In function `main':
/wireshark-0.99.6/conftest.l:17: undefined reference to `yywrap'
collect2: ld returned 1 exit status
configure:19509: $? = 1
configure: failed program was:
|
| #line 3 "lex.yy.c"
|
| #define YY_INT_ALIGNED short int
|
| /* A lexical scanner generated by flex */
|
| #define FLEX_SCANNER
| #define YY_FLEX_MAJOR_VERSION 2
| #define YY_FLEX_MINOR_VERSION 5
| #define YY_FLEX_SUBMINOR_VERSION 33
| #if YY_FLEX_SUBMINOR_VERSION > 0
| #define FLEX_BETA
| #endif
|
| /* First, we deal with platform-specific or compiler-specific issues. */
|
| /* begin standard C headers. */
| #include <stdio.h>
| #include <string.h>
| #include <errno.h>
| #include <stdlib.h>
|
| /* end standard C headers. */
|
| /* flex integer type definitions */
|
| #ifndef FLEXINT_H
| #define FLEXINT_H
|
| /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
|
| #if __STDC_VERSION__ >= 199901L
|
| /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
| * if you want the limit (max/min) macros for int types.
| */
| #ifndef __STDC_LIMIT_MACROS
| #define __STDC_LIMIT_MACROS 1
| #endif
|
| #include <inttypes.h>
| typedef int8_t flex_int8_t;
| typedef uint8_t flex_uint8_t;
| typedef int16_t flex_int16_t;
| typedef uint16_t flex_uint16_t;
| typedef int32_t flex_int32_t;
| typedef uint32_t flex_uint32_t;
| #else
| typedef signed char flex_int8_t;
| typedef short int flex_int16_t;
| typedef int flex_int32_t;
| typedef unsigned char flex_uint8_t;
| typedef unsigned short int flex_uint16_t;
| typedef unsigned int flex_uint32_t;
| #endif /* ! C99 */
|
| /* Limits of integral types. */
| #ifndef INT8_MIN
| #define INT8_MIN (-128)
| #endif
| #ifndef INT16_MIN
| #define INT16_MIN (-32767-1)
| #endif
| #ifndef INT32_MIN
| #define INT32_MIN (-2147483647-1)
| #endif
| #ifndef INT8_MAX
| #define INT8_MAX (127)
| #endif
| #ifndef INT16_MAX
| #define INT16_MAX (32767)
| #endif
| #ifndef INT32_MAX
| #define INT32_MAX (2147483647)
| #endif
| #ifndef UINT8_MAX
| #define UINT8_MAX (255U)
| #endif
| #ifndef UINT16_MAX
| #define UINT16_MAX (65535U)
| #endif
| #ifndef UINT32_MAX
| #define UINT32_MAX (4294967295U)
| #endif
|
| #endif /* ! FLEXINT_H */
|
| #ifdef __cplusplus
|
| /* The "const" storage-class-modifier is valid. */
| #define YY_USE_CONST
|
| #else /* ! __cplusplus */
|
| #if __STDC__
|
| #define YY_USE_CONST
|
| #endif /* __STDC__ */
| #endif /* ! __cplusplus */
|
| #ifdef YY_USE_CONST
| #define yyconst const
| #else
| #define yyconst
| #endif
|
| /* Returned upon end-of-file. */
| #define YY_NULL 0
|
| /* Promotes a possibly negative, possibly signed char to an unsigned
| * integer for use as an array index. If the signed char is negative,
| * we want to instead treat it as an 8-bit unsigned char, hence the
| * double cast.
| */
| #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
|
| /* Enter a start condition. This macro really ought to take a parameter,
| * but we do it the disgusting crufty way forced on us by the ()-less
| * definition of BEGIN.
| */
| #define BEGIN (yy_start) = 1 + 2 *
|
| /* Translate the current start state into a value that can be later handed
| * to BEGIN to return to the state. The YYSTATE alias is for lex
| * compatibility.
| */
| #define YY_START (((yy_start) - 1) / 2)
| #define YYSTATE YY_START
|
| /* Action number for EOF rule of a given start state. */
| #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
|
| /* Special action meaning "start processing a new file". */
| #define YY_NEW_FILE yyrestart(yyin )
|
| #define YY_END_OF_BUFFER_CHAR 0
|
| /* Size of default input buffer. */
| #ifndef YY_BUF_SIZE
| #define YY_BUF_SIZE 16384
| #endif
|
| /* The state buf must be large enough to hold one state per character in the main buffer.
| */
| #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
|
| #ifndef YY_TYPEDEF_YY_BUFFER_STATE
| #define YY_TYPEDEF_YY_BUFFER_STATE
| typedef struct yy_buffer_state *YY_BUFFER_STATE;
| #endif
|
| extern int yyleng;
|
| extern FILE *yyin, *yyout;
|
| #define EOB_ACT_CONTINUE_SCAN 0
| #define EOB_ACT_END_OF_FILE 1
| #define EOB_ACT_LAST_MATCH 2
|
| #define YY_LESS_LINENO(n)
|
| /* Return all but the first "n" matched characters back to the input stream. */
| #define yyless(n) \
| do \
| { \
| /* Undo effects of setting up yytext. */ \
| int yyless_macro_arg = (n); \
| YY_LESS_LINENO(yyless_macro_arg);\
| *yy_cp = (yy_hold_char); \
| YY_RESTORE_YY_MORE_OFFSET \
| (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
| YY_DO_BEFORE_ACTION; /* set up yytext again */ \
| } \
| while ( 0 )
|
| #define unput(c) yyunput( c, (yytext_ptr) )
|
| /* The following is because we cannot portably get our hands on size_t
| * (without autoconf's help, which isn't available because we want
| * flex-generated scanners to compile on their own).
| */
|
| #ifndef YY_TYPEDEF_YY_SIZE_T
| #define YY_TYPEDEF_YY_SIZE_T
| typedef unsigned int yy_size_t;
| #endif
|
| #ifndef YY_STRUCT_YY_BUFFER_STATE
| #define YY_STRUCT_YY_BUFFER_STATE
| struct yy_buffer_state
| {
| FILE *yy_input_file;
|
| char *yy_ch_buf; /* input buffer */
| char *yy_buf_pos; /* current position in input buffer */
|
| /* Size of input buffer in bytes, not including room for EOB
| * characters.
| */
| yy_size_t yy_buf_size;
|
| /* Number of characters read into yy_ch_buf, not including EOB
| * characters.
| */
| int yy_n_chars;
|
| /* Whether we "own" the buffer - i.e., we know we created it,
| * and can realloc() it to grow it, and should free() it to
| * delete it.
| */
| int yy_is_our_buffer;
|
| /* Whether this is an "interactive" input source; if so, and
| * if we're using stdio for input, then we want to use getc()
| * instead of fread(), to make sure we stop fetching input after
| * each newline.
| */
| int yy_is_interactive;
|
| /* Whether we're considered to be at the beginning of a line.
| * If so, '^' rules will be active on the next match, otherwise
| * not.
| */
| int yy_at_bol;
|
| int yy_bs_lineno; /**< The line count. */
| int yy_bs_column; /**< The column count. */
|
| /* Whether to try to fill the input buffer when we reach the
| * end of it.
| */
| int yy_fill_buffer;
|
| int yy_buffer_status;
|
| #define YY_BUFFER_NEW 0
| #define YY_BUFFER_NORMAL 1
| /* When an EOF's been seen but there's still some text to process
| * then we mark the buffer as YY_EOF_PENDING, to indicate that we
| * shouldn't try reading from the input source any more. We might
| * still have a bunch of tokens to match, though, because of
| * possible backing-up.
| *
| * When we actually see the EOF, we change the status to "new"
| * (via yyrestart()), so that the user can continue scanning by
| * just pointing yyin at a new input file.
| */
| #define YY_BUFFER_EOF_PENDING 2
|
| };
| #endif /* !YY_STRUCT_YY_BUFFER_STATE */
|
| /* Stack of input buffers. */
| static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
| static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
| static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
|
| /* We provide macros for accessing buffer states in case in the
| * future we want to put the buffer states in a more general
| * "scanner state".
| *
| * Returns the top of the stack, or NULL.
| */
| #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
| ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
| : NULL)
|
| /* Same as previous macro, but useful when we know that the buffer stack is not
| * NULL or when we need an lvalue. For internal use only.
| */
| #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
|
| /* yy_hold_char holds the character lost when yytext is formed. */
| static char yy_hold_char;
| static int yy_n_chars; /* number of characters read into yy_ch_buf */
| int yyleng;
|
| /* Points to current character in buffer. */
| static char *yy_c_buf_p = (char *) 0;
| static int yy_init = 0; /* whether we need to initialize */
| static int yy_start = 0; /* start state number */
|
| /* Flag which is used to allow yywrap()'s to do buffer switches
| * instead of setting up a fresh yyin. A bit of a hack ...
| */
| static int yy_did_buffer_switch_on_eof;
|
| void yyrestart (FILE *input_file );
| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
| YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
| void yy_delete_buffer (YY_BUFFER_STATE b );
| void yy_flush_buffer (YY_BUFFER_STATE b );
| void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
| void yypop_buffer_state (void );
|
| static void yyensure_buffer_stack (void );
| static void yy_load_buffer_state (void );
| static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
|
| #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
|
| YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
| YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
| YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len );
|
| void *yyalloc (yy_size_t );
| void *yyrealloc (void *,yy_size_t );
| void yyfree (void * );
|
| #define yy_new_buffer yy_create_buffer
|
| #define yy_set_interactive(is_interactive) \
| { \
| if ( ! YY_CURRENT_BUFFER ){ \
| yyensure_buffer_stack (); \
| YY_CURRENT_BUFFER_LVALUE = \
| yy_create_buffer(yyin,YY_BUF_SIZE ); \
| } \
| YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
| }
|
| #define yy_set_bol(at_bol) \
| { \
| if ( ! YY_CURRENT_BUFFER ){\
| yyensure_buffer_stack (); \
| YY_CURRENT_BUFFER_LVALUE = \
| yy_create_buffer(yyin,YY_BUF_SIZE ); \
| } \
| YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
| }
|
| #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
|
| /* Begin user sect3 */
|
| typedef unsigned char YY_CHAR;
|
| FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
|
| typedef int yy_state_type;
|
| extern int yylineno;
|
| int yylineno = 1;
|
| extern char *yytext;
| #define yytext_ptr yytext
|
| static yy_state_type yy_get_previous_state (void );
| static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
| static int yy_get_next_buffer (void );
| static void yy_fatal_error (yyconst char msg[] );
|
| /* Done after the current pattern has been matched and before the
| * corresponding action - sets up yytext.
| */
| #define YY_DO_BEFORE_ACTION \
| (yytext_ptr) = yy_bp; \
| (yytext_ptr) -= (yy_more_len); \
| yyleng = (size_t) (yy_cp - (yytext_ptr)); \
| (yy_hold_char) = *yy_cp; \
| *yy_cp = '\0'; \
| (yy_c_buf_p) = yy_cp;
|
| #define YY_NUM_RULES 8
| #define YY_END_OF_BUFFER 9
| /* This struct is not used in this scanner,
| but its presence is necessary. */
| struct yy_trans_info
| {
| flex_int32_t yy_verify;
| flex_int32_t yy_nxt;
| };
| static yyconst flex_int16_t yy_acclist[23] =
| { 0,
| 9, 7, 8, 8, 1, 7, 8, 2, 7, 8,
| 3, 7, 8, 4, 7, 8, 5, 7, 8, 6,
| 7, 8
| } ;
|
| static yyconst flex_int16_t yy_accept[14] =
| { 0,
| 1, 1, 1, 2, 4, 5, 8, 11, 14, 17,
| 20, 23, 23
| } ;
|
| static yyconst flex_int32_t yy_ec[256] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 2,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 3, 4, 5, 6,
|
| 7, 8, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
|
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1
| } ;
|
| static yyconst flex_int32_t yy_meta[9] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1
| } ;
|
| static yyconst flex_int16_t yy_base[13] =
| { 0,
| 0, 0, 9, 10, 10, 10, 10, 10, 10, 10,
| 10, 10
| } ;
|
| static yyconst flex_int16_t yy_def[13] =
| { 0,
| 12, 1, 12, 12, 12, 12, 12, 12, 12, 12,
| 12, 0
| } ;
|
| static yyconst flex_int16_t yy_nxt[19] =
| { 0,
| 4, 5, 6, 7, 8, 9, 10, 11, 12, 3,
| 12, 12, 12, 12, 12, 12, 12, 12
| } ;
|
| static yyconst flex_int16_t yy_chk[19] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1, 3, 12,
| 12, 12, 12, 12, 12, 12, 12, 12
| } ;
|
| extern int yy_flex_debug;
| int yy_flex_debug = 0;
|
| static yy_state_type *yy_state_buf=0, *yy_state_ptr=0;
| static char *yy_full_match;
| static int yy_lp;
| #define REJECT \
| { \
| *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \
| yy_cp = (yy_full_match); /* restore poss. backed-over text */ \
| ++(yy_lp); \
| goto find_rule; \
| }
|
| static int yy_more_flag = 0;
| static int yy_more_len = 0;
| #define yymore() ((yy_more_flag) = 1)
| #define YY_MORE_ADJ (yy_more_len)
| #define YY_RESTORE_YY_MORE_OFFSET
| char *yytext;
| #line 1 "conftest.l"
| #line 472 "lex.yy.c"
|
| #define INITIAL 0
|
| #ifndef YY_NO_UNISTD_H
| /* Special case for "unistd.h", since it is non-ANSI. We include it way
| * down here because we want the user's section 1 to have been scanned first.
| * The user has a chance to override it with an option.
| */
| #include <unistd.h>
| #endif
|
| #ifndef YY_EXTRA_TYPE
| #define YY_EXTRA_TYPE void *
| #endif
|
| static int yy_init_globals (void );
|
| /* Macros after this point can all be overridden by user definitions in
| * section 1.
| */
|
| #ifndef YY_SKIP_YYWRAP
| #ifdef __cplusplus
| extern "C" int yywrap (void );
| #else
| extern int yywrap (void );
| #endif
| #endif
|
| static void yyunput (int c,char *buf_ptr );
|
| #ifndef yytext_ptr
| static void yy_flex_strncpy (char *,yyconst char *,int );
| #endif
|
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen (yyconst char * );
| #endif
|
| #ifndef YY_NO_INPUT
|
| #ifdef __cplusplus
| static int yyinput (void );
| #else
| static int input (void );
| #endif
|
| #endif
|
| /* Amount of stuff to slurp up with each read. */
| #ifndef YY_READ_BUF_SIZE
| #define YY_READ_BUF_SIZE 8192
| #endif
|
| /* Copy whatever the last rule matched to the standard output. */
| #ifndef ECHO
| /* This used to be an fputs(), but since the string might contain NUL's,
| * we now use fwrite().
| */
| #define ECHO (void) fwrite( yytext, yyleng, 1, yyout )
| #endif
|
| /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
| * is returned in "result".
| */
| #ifndef YY_INPUT
| #define YY_INPUT(buf,result,max_size) \
| if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
| { \
| int c = '*'; \
| size_t n; \
| for ( n = 0; n < max_size && \
| (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
| buf[n] = (char) c; \
| if ( c == '\n' ) \
| buf[n++] = (char) c; \
| if ( c == EOF && ferror( yyin ) ) \
| YY_FATAL_ERROR( "input in flex scanner failed" ); \
| result = n; \
| } \
| else \
| { \
| errno=0; \
| while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
| { \
| if( errno != EINTR) \
| { \
| YY_FATAL_ERROR( "input in flex scanner failed" ); \
| break; \
| } \
| errno=0; \
| clearerr(yyin); \
| } \
| }\
| \
|
| #endif
|
| /* No semi-colon after return; correct usage is to write "yyterminate();" -
| * we don't want an extra ';' after the "return" because that will cause
| * some compilers to complain about unreachable statements.
| */
| #ifndef yyterminate
| #define yyterminate() return YY_NULL
| #endif
|
| /* Number of entries by which start-condition stack grows. */
| #ifndef YY_START_STACK_INCR
| #define YY_START_STACK_INCR 25
| #endif
|
| /* Report a fatal error. */
| #ifndef YY_FATAL_ERROR
| #define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
| #endif
|
| /* end tables serialization structures and prototypes */
|
| /* Default declaration of generated scanner - a define so the user can
| * easily add parameters.
| */
| #ifndef YY_DECL
| #define YY_DECL_IS_OURS 1
|
| extern int yylex (void);
|
| #define YY_DECL int yylex (void)
| #endif /* !YY_DECL */
|
| /* Code executed at the beginning of each rule, after yytext and yyleng
| * have been set up.
| */
| #ifndef YY_USER_ACTION
| #define YY_USER_ACTION
| #endif
|
| /* Code executed at the end of each rule. */
| #ifndef YY_BREAK
| #define YY_BREAK break;
| #endif
|
| #define YY_RULE_SETUP \
| YY_USER_ACTION
|
| /** The main scanner function which does all the work.
| */
| YY_DECL
| {
| register yy_state_type yy_current_state;
| register char *yy_cp, *yy_bp;
| register int yy_act;
|
| #line 1 "conftest.l"
|
| #line 627 "lex.yy.c"
|
| if ( !(yy_init) )
| {
| (yy_init) = 1;
|
| #ifdef YY_USER_INIT
| YY_USER_INIT;
| #endif
|
| /* Create the reject buffer large enough to save one state per allowed character. */
| if ( ! (yy_state_buf) )
| (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE );
|
| if ( ! (yy_start) )
| (yy_start) = 1; /* first start state */
|
| if ( ! yyin )
| yyin = stdin;
|
| if ( ! yyout )
| yyout = stdout;
|
| if ( ! YY_CURRENT_BUFFER ) {
| yyensure_buffer_stack ();
| YY_CURRENT_BUFFER_LVALUE =
| yy_create_buffer(yyin,YY_BUF_SIZE );
| }
|
| yy_load_buffer_state( );
| }
|
| while ( 1 ) /* loops until end-of-file is reached */
| {
| (yy_more_len) = 0;
| if ( (yy_more_flag) )
| {
| (yy_more_len) = (yy_c_buf_p) - (yytext_ptr);
| (yy_more_flag) = 0;
| }
| yy_cp = (yy_c_buf_p);
|
| /* Support of yytext. */
| *yy_cp = (yy_hold_char);
|
| /* yy_bp points to the position in yy_ch_buf of the start of
| * the current run.
| */
| yy_bp = yy_cp;
|
| yy_current_state = (yy_start);
|
| (yy_state_ptr) = (yy_state_buf);
| *(yy_state_ptr)++ = yy_current_state;
|
| yy_match:
| do
| {
| register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| *(yy_state_ptr)++ = yy_current_state;
| ++yy_cp;
| }
| while ( yy_base[yy_current_state] != 10 );
|
| yy_find_action:
| yy_current_state = *--(yy_state_ptr);
| (yy_lp) = yy_accept[yy_current_state];
| find_rule: /* we branch to this label when backing up */
| for ( ; ; ) /* until we find what rule we matched */
| {
| if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] )
| {
| yy_act = yy_acclist[(yy_lp)];
| {
| (yy_full_match) = yy_cp;
| break;
| }
| }
| --yy_cp;
| yy_current_state = *--(yy_state_ptr);
| (yy_lp) = yy_accept[yy_current_state];
| }
|
| YY_DO_BEFORE_ACTION;
|
| do_action: /* This label is used only to access EOF actions. */
|
| switch ( yy_act )
| { /* beginning of action switch */
| case 1:
| YY_RULE_SETUP
| #line 2 "conftest.l"
| { ECHO; }
| YY_BREAK
| case 2:
| YY_RULE_SETUP
| #line 3 "conftest.l"
| { REJECT; }
| YY_BREAK
| case 3:
| YY_RULE_SETUP
| #line 4 "conftest.l"
| { yymore (); }
| YY_BREAK
| case 4:
| YY_RULE_SETUP
| #line 5 "conftest.l"
| { yyless (1); }
| YY_BREAK
| case 5:
| YY_RULE_SETUP
| #line 6 "conftest.l"
| { yyless (input () != 0); }
| YY_BREAK
| case 6:
| YY_RULE_SETUP
| #line 7 "conftest.l"
| { unput (yytext[0]); }
| YY_BREAK
| case 7:
| YY_RULE_SETUP
| #line 8 "conftest.l"
| { BEGIN INITIAL; }
| YY_BREAK
| case 8:
| YY_RULE_SETUP
| #line 9 "conftest.l"
| ECHO;
| YY_BREAK
| #line 763 "lex.yy.c"
| case YY_STATE_EOF(INITIAL):
| yyterminate();
|
| case YY_END_OF_BUFFER:
| {
| /* Amount of text matched not including the EOB char. */
| int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
|
| /* Undo the effects of YY_DO_BEFORE_ACTION. */
| *yy_cp = (yy_hold_char);
| YY_RESTORE_YY_MORE_OFFSET
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
| {
| /* We're scanning a new file or input source. It's
| * possible that this happened because the user
| * just pointed yyin at a new source and called
| * yylex(). If so, then we have to assure
| * consistency between YY_CURRENT_BUFFER and our
| * globals. Here is the right place to do so, because
| * this is the first action (other than possibly a
| * back-up) that will match for the new input source.
| */
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
| }
|
| /* Note that here we test for yy_c_buf_p "<=" to the position
| * of the first EOB in the buffer, since yy_c_buf_p will
| * already have been incremented past the NUL character
| * (since all states make transitions on EOB to the
| * end-of-buffer state). Contrast this with the test
| * in input().
| */
| if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| { /* This was really a NUL. */
| yy_state_type yy_next_state;
|
| (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
|
| yy_current_state = yy_get_previous_state( );
|
| /* Okay, we're now positioned to make the NUL
| * transition. We couldn't have
| * yy_get_previous_state() go ahead and do it
| * for us because it doesn't know how to deal
| * with the possibility of jamming (and we don't
| * want to build jamming into it because then it
| * will run more slowly).
| */
|
| yy_next_state = yy_try_NUL_trans( yy_current_state );
|
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
|
| if ( yy_next_state )
| {
| /* Consume the NUL. */
| yy_cp = ++(yy_c_buf_p);
| yy_current_state = yy_next_state;
| goto yy_match;
| }
|
| else
| {
| yy_cp = (yy_c_buf_p);
| goto yy_find_action;
| }
| }
|
| else switch ( yy_get_next_buffer( ) )
| {
| case EOB_ACT_END_OF_FILE:
| {
| (yy_did_buffer_switch_on_eof) = 0;
|
| if ( yywrap( ) )
| {
| /* Note: because we've taken care in
| * yy_get_next_buffer() to have set up
| * yytext, we can now set up
| * yy_c_buf_p so that if some total
| * hoser (like flex itself) wants to
| * call the scanner after we return the
| * YY_NULL, it'll still work - another
| * YY_NULL will get returned.
| */
| (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
|
| yy_act = YY_STATE_EOF(YY_START);
| goto do_action;
| }
|
| else
| {
| if ( ! (yy_did_buffer_switch_on_eof) )
| YY_NEW_FILE;
| }
| break;
| }
|
| case EOB_ACT_CONTINUE_SCAN:
| (yy_c_buf_p) =
| (yytext_ptr) + yy_amount_of_matched_text;
|
| yy_current_state = yy_get_previous_state( );
|
| yy_cp = (yy_c_buf_p);
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| goto yy_match;
|
| case EOB_ACT_LAST_MATCH:
| (yy_c_buf_p) =
| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
|
| yy_current_state = yy_get_previous_state( );
|
| yy_cp = (yy_c_buf_p);
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| goto yy_find_action;
| }
| break;
| }
|
| default:
| YY_FATAL_ERROR(
| "fatal flex scanner internal error--no action found" );
| } /* end of action switch */
| } /* end of scanning one token */
| } /* end of yylex */
|
| /* yy_get_next_buffer - try to read in a new buffer
| *
| * Returns a code representing an action:
| * EOB_ACT_LAST_MATCH -
| * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
| * EOB_ACT_END_OF_FILE - end of file
| */
| static int yy_get_next_buffer (void)
| {
| register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
| register char *source = (yytext_ptr);
| register int number_to_move, i;
| int ret_val;
|
| if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
| YY_FATAL_ERROR(
| "fatal flex scanner internal error--end of buffer missed" );
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
| { /* Don't try to fill the buffer, so this is an EOF. */
| if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
| {
| /* We matched a single character, the EOB, so
| * treat this as a final EOF.
| */
| return EOB_ACT_END_OF_FILE;
| }
|
| else
| {
| /* We matched some text prior to the EOB, first
| * process it.
| */
| return EOB_ACT_LAST_MATCH;
| }
| }
|
| /* Try to read more data. */
|
| /* First move last chars to start of buffer. */
| number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
|
| for ( i = 0; i < number_to_move; ++i )
| *(dest++) = *(source++);
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
| /* don't do the read, it's not guaranteed to return an EOF,
| * just force an EOF
| */
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
|
| else
| {
| int num_to_read =
| YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
|
| while ( num_to_read <= 0 )
| { /* Not enough room in the buffer - grow it. */
|
| YY_FATAL_ERROR(
| "input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
|
| }
|
| if ( num_to_read > YY_READ_BUF_SIZE )
| num_to_read = YY_READ_BUF_SIZE;
|
| /* Read in more data. */
| YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
| (yy_n_chars), num_to_read );
|
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| if ( (yy_n_chars) == 0 )
| {
| if ( number_to_move == YY_MORE_ADJ )
| {
| ret_val = EOB_ACT_END_OF_FILE;
| yyrestart(yyin );
| }
|
| else
| {
| ret_val = EOB_ACT_LAST_MATCH;
| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
| YY_BUFFER_EOF_PENDING;
| }
| }
|
| else
| ret_val = EOB_ACT_CONTINUE_SCAN;
|
| (yy_n_chars) += number_to_move;
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
|
| (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
|
| return ret_val;
| }
|
| /* yy_get_previous_state - get the state just before the EOB char was reached */
|
| static yy_state_type yy_get_previous_state (void)
| {
| register yy_state_type yy_current_state;
| register char *yy_cp;
|
| yy_current_state = (yy_start);
|
| (yy_state_ptr) = (yy_state_buf);
| *(yy_state_ptr)++ = yy_current_state;
|
| for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
| {
| register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| *(yy_state_ptr)++ = yy_current_state;
| }
|
| return yy_current_state;
| }
|
| /* yy_try_NUL_trans - try to make a transition on the NUL character
| *
| * synopsis
| * next_state = yy_try_NUL_trans( current_state );
| */
| static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
| {
| register int yy_is_jam;
|
| register YY_CHAR yy_c = 1;
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| yy_is_jam = (yy_current_state == 12);
| if ( ! yy_is_jam )
| *(yy_state_ptr)++ = yy_current_state;
|
| return yy_is_jam ? 0 : yy_current_state;
| }
|
| static void yyunput (int c, register char * yy_bp )
| {
| register char *yy_cp;
|
| yy_cp = (yy_c_buf_p);
|
| /* undo effects of setting up yytext */
| *yy_cp = (yy_hold_char);
|
| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| { /* need to shift things up to make room */
| /* +2 for EOB chars. */
| register int number_to_move = (yy_n_chars) + 2;
| register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
| YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
| register char *source =
| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
|
| while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
| *--dest = *--source;
|
| yy_cp += (int) (dest - source);
| yy_bp += (int) (dest - source);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
|
| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| YY_FATAL_ERROR( "flex scanner push-back overflow" );
| }
|
| *--yy_cp = (char) c;
|
| (yytext_ptr) = yy_bp;
| (yy_hold_char) = *yy_cp;
| (yy_c_buf_p) = yy_cp;
| }
|
| #ifndef YY_NO_INPUT
| #ifdef __cplusplus
| static int yyinput (void)
| #else
| static int input (void)
| #endif
|
| {
| int c;
|
| *(yy_c_buf_p) = (yy_hold_char);
|
| if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
| {
| /* yy_c_buf_p now points to the character we want to return.
| * If this occurs *before* the EOB characters, then it's a
| * valid NUL; if not, then we've hit the end of the buffer.
| */
| if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| /* This was really a NUL. */
| *(yy_c_buf_p) = '\0';
|
| else
| { /* need more input */
| int offset = (yy_c_buf_p) - (yytext_ptr);
| ++(yy_c_buf_p);
|
| switch ( yy_get_next_buffer( ) )
| {
| case EOB_ACT_LAST_MATCH:
| /* This happens because yy_g_n_b()
| * sees that we've accumulated a
| * token and flags that we need to
| * try matching the token before
| * proceeding. But for input(),
| * there's no matching to consider.
| * So convert the EOB_ACT_LAST_MATCH
| * to EOB_ACT_END_OF_FILE.
| */
|
| /* Reset buffer status. */
| yyrestart(yyin );
|
| /*FALLTHROUGH*/
|
| case EOB_ACT_END_OF_FILE:
| {
| if ( yywrap( ) )
| return EOF;
|
| if ( ! (yy_did_buffer_switch_on_eof) )
| YY_NEW_FILE;
| #ifdef __cplusplus
| return yyinput();
| #else
| return input();
| #endif
| }
|
| case EOB_ACT_CONTINUE_SCAN:
| (yy_c_buf_p) = (yytext_ptr) + offset;
| break;
| }
| }
| }
|
| c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
| *(yy_c_buf_p) = '\0'; /* preserve yytext */
| (yy_hold_char) = *++(yy_c_buf_p);
|
| return c;
| }
| #endif /* ifndef YY_NO_INPUT */
|
| /** Immediately switch to a different input stream.
| * @param input_file A readable stream.
| *
| * @note This function does not reset the start condition to @c INITIAL .
| */
| void yyrestart (FILE * input_file )
| {
|
| if ( ! YY_CURRENT_BUFFER ){
| yyensure_buffer_stack ();
| YY_CURRENT_BUFFER_LVALUE =
| yy_create_buffer(yyin,YY_BUF_SIZE );
| }
|
| yy_init_buffer(YY_CURRENT_BUFFER,input_file );
| yy_load_buffer_state( );
| }
|
| /** Switch to a different input buffer.
| * @param new_buffer The new input buffer.
| *
| */
| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
| {
|
| /* TODO. We should be able to replace this entire function body
| * with
| * yypop_buffer_state();
| * yypush_buffer_state(new_buffer);
| */
| yyensure_buffer_stack ();
| if ( YY_CURRENT_BUFFER == new_buffer )
| return;
|
| if ( YY_CURRENT_BUFFER )
| {
| /* Flush out information for old buffer. */
| *(yy_c_buf_p) = (yy_hold_char);
| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| YY_CURRENT_BUFFER_LVALUE = new_buffer;
| yy_load_buffer_state( );
|
| /* We don't actually know whether we did this switch during
| * EOF (yywrap()) processing, but the only time this flag
| * is looked at is after yywrap() is called, so it's safe
| * to go ahead and always set it.
| */
| (yy_did_buffer_switch_on_eof) = 1;
| }
|
| static void yy_load_buffer_state (void)
| {
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
| yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
| (yy_hold_char) = *(yy_c_buf_p);
| }
|
| /** Allocate and initialize an input buffer state.
| * @param file A readable stream.
| * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
| *
| * @return the allocated buffer state.
| */
| YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
| {
| YY_BUFFER_STATE b;
|
| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
| if ( ! b )
| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
|
| b->yy_buf_size = size;
|
| /* yy_ch_buf has to be 2 characters longer than the size given because
| * we need to put in 2 end-of-buffer characters.
| */
| b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
| if ( ! b->yy_ch_buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
|
| b->yy_is_our_buffer = 1;
|
| yy_init_buffer(b,file );
|
| return b;
| }
|
| /** Destroy the buffer.
| * @param b a buffer created with yy_create_buffer()
| *
| */
| void yy_delete_buffer (YY_BUFFER_STATE b )
| {
|
| if ( ! b )
| return;
|
| if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
| YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
|
| if ( b->yy_is_our_buffer )
| yyfree((void *) b->yy_ch_buf );
|
| yyfree((void *) b );
| }
|
| #ifndef __cplusplus
| extern int isatty (int );
| #endif /* __cplusplus */
|
| /* Initializes or reinitializes a buffer.
| * This function is sometimes called more than once on the same buffer,
| * such as during a yyrestart() or at EOF.
| */
| static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
|
| {
| int oerrno = errno;
|
| yy_flush_buffer(b );
|
| b->yy_input_file = file;
| b->yy_fill_buffer = 1;
|
| /* If b is the current buffer, then yy_init_buffer was _probably_
| * called from yyrestart() or through yy_get_next_buffer.
| * In that case, we don't want to reset the lineno or column.
| */
| if (b != YY_CURRENT_BUFFER){
| b->yy_bs_lineno = 1;
| b->yy_bs_column = 0;
| }
|
| b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
|
| errno = oerrno;
| }
|
| /** Discard all buffered characters. On the next scan, YY_INPUT will be called.
| * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
| *
| */
| void yy_flush_buffer (YY_BUFFER_STATE b )
| {
| if ( ! b )
| return;
|
| b->yy_n_chars = 0;
|
| /* We always need two end-of-buffer characters. The first causes
| * a transition to the end-of-buffer state. The second causes
| * a jam in that state.
| */
| b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
| b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
|
| b->yy_buf_pos = &b->yy_ch_buf[0];
|
| b->yy_at_bol = 1;
| b->yy_buffer_status = YY_BUFFER_NEW;
|
| if ( b == YY_CURRENT_BUFFER )
| yy_load_buffer_state( );
| }
|
| /** Pushes the new state onto the stack. The new state becomes
| * the current state. This function will allocate the stack
| * if necessary.
| * @param new_buffer The new state.
| *
| */
| void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
| {
| if (new_buffer == NULL)
| return;
|
| yyensure_buffer_stack();
|
| /* This block is copied from yy_switch_to_buffer. */
| if ( YY_CURRENT_BUFFER )
| {
| /* Flush out information for old buffer. */
| *(yy_c_buf_p) = (yy_hold_char);
| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| /* Only push if top exists. Otherwise, replace top. */
| if (YY_CURRENT_BUFFER)
| (yy_buffer_stack_top)++;
| YY_CURRENT_BUFFER_LVALUE = new_buffer;
|
| /* copied from yy_switch_to_buffer. */
| yy_load_buffer_state( );
| (yy_did_buffer_switch_on_eof) = 1;
| }
|
| /** Removes and deletes the top of the stack, if present.
| * The next element becomes the new top.
| *
| */
| void yypop_buffer_state (void)
| {
| if (!YY_CURRENT_BUFFER)
| return;
|
| yy_delete_buffer(YY_CURRENT_BUFFER );
| YY_CURRENT_BUFFER_LVALUE = NULL;
| if ((yy_buffer_stack_top) > 0)
| --(yy_buffer_stack_top);
|
| if (YY_CURRENT_BUFFER) {
| yy_load_buffer_state( );
| (yy_did_buffer_switch_on_eof) = 1;
| }
| }
|
| /* Allocates the stack if it does not exist.
| * Guarantees space for at least one push.
| */
| static void yyensure_buffer_stack (void)
| {
| int num_to_alloc;
|
| if (!(yy_buffer_stack)) {
|
| /* First allocation is just for 2 elements, since we don't know if this
| * scanner will even need a stack. We use 2 instead of 1 to avoid an
| * immediate realloc on the next call.
| */
| num_to_alloc = 1;
| (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
| (num_to_alloc * sizeof(struct yy_buffer_state*)
| );
|
| memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
|
| (yy_buffer_stack_max) = num_to_alloc;
| (yy_buffer_stack_top) = 0;
| return;
| }
|
| if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
|
| /* Increase the buffer to prepare for a possible push. */
| int grow_size = 8 /* arbitrary grow size */;
|
| num_to_alloc = (yy_buffer_stack_max) + grow_size;
| (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
| ((yy_buffer_stack),
| num_to_alloc * sizeof(struct yy_buffer_state*)
| );
|
| /* zero only the new slots.*/
| memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
| (yy_buffer_stack_max) = num_to_alloc;
| }
| }
|
| /** Setup the input buffer state to scan directly from a user-specified character buffer.
| * @param base the character buffer
| * @param size the size in bytes of the character buffer
| *
| * @return the newly allocated buffer state object.
| */
| YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
| {
| YY_BUFFER_STATE b;
|
| if ( size < 2 ||
| base[size-2] != YY_END_OF_BUFFER_CHAR ||
| base[size-1] != YY_END_OF_BUFFER_CHAR )
| /* They forgot to leave room for the EOB's. */
| return 0;
|
| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
| if ( ! b )
| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
|
| b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
| b->yy_buf_pos = b->yy_ch_buf = base;
| b->yy_is_our_buffer = 0;
| b->yy_input_file = 0;
| b->yy_n_chars = b->yy_buf_size;
| b->yy_is_interactive = 0;
| b->yy_at_bol = 1;
| b->yy_fill_buffer = 0;
| b->yy_buffer_status = YY_BUFFER_NEW;
|
| yy_switch_to_buffer(b );
|
| return b;
| }
|
| /** Setup the input buffer state to scan a string. The next call to yylex() will
| * scan from a @e copy of @a str.
| * @param yystr a NUL-terminated string to scan
| *
| * @return the newly allocated buffer state object.
| * @note If you want to scan bytes that may contain NUL values, then use
| * yy_scan_bytes() instead.
| */
| YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
| {
|
| return yy_scan_bytes(yystr,strlen(yystr) );
| }
|
| /** Setup the input buffer state to scan the given bytes. The next call to yylex() will
| * scan from a @e copy of @a bytes.
| * @param bytes the byte buffer to scan
| * @param len the number of bytes in the buffer pointed to by @a bytes.
| *
| * @return the newly allocated buffer state object.
| */
| YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len )
| {
| YY_BUFFER_STATE b;
| char *buf;
| yy_size_t n;
| int i;
|
| /* Get memory for full buffer, including space for trailing EOB's. */
| n = _yybytes_len + 2;
| buf = (char *) yyalloc(n );
| if ( ! buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
|
| for ( i = 0; i < _yybytes_len; ++i )
| buf[i] = yybytes[i];
|
| buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
|
| b = yy_scan_buffer(buf,n );
| if ( ! b )
| YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
|
| /* It's okay to grow etc. this buffer, and we should throw it
| * away when we're done.
| */
| b->yy_is_our_buffer = 1;
|
| return b;
| }
|
| #ifndef YY_EXIT_FAILURE
| #define YY_EXIT_FAILURE 2
| #endif
|
| static void yy_fatal_error (yyconst char* msg )
| {
| (void) fprintf( stderr, "%s\n", msg );
| exit( YY_EXIT_FAILURE );
| }
|
| /* Redefine yyless() so it works in section 3 code. */
|
| #undef yyless
| #define yyless(n) \
| do \
| { \
| /* Undo effects of setting up yytext. */ \
| int yyless_macro_arg = (n); \
| YY_LESS_LINENO(yyless_macro_arg);\
| yytext[yyleng] = (yy_hold_char); \
| (yy_c_buf_p) = yytext + yyless_macro_arg; \
| (yy_hold_char) = *(yy_c_buf_p); \
| *(yy_c_buf_p) = '\0'; \
| yyleng = yyless_macro_arg; \
| } \
| while ( 0 )
|
| /* Accessor methods (get/set functions) to struct members. */
|
| /** Get the current line number.
| *
| */
| int yyget_lineno (void)
| {
|
| return yylineno;
| }
|
| /** Get the input stream.
| *
| */
| FILE *yyget_in (void)
| {
| return yyin;
| }
|
| /** Get the output stream.
| *
| */
| FILE *yyget_out (void)
| {
| return yyout;
| }
|
| /** Get the length of the current token.
| *
| */
| int yyget_leng (void)
| {
| return yyleng;
| }
|
| /** Get the current token.
| *
| */
|
| char *yyget_text (void)
| {
| return yytext;
| }
|
| /** Set the current line number.
| * @param line_number
| *
| */
| void yyset_lineno (int line_number )
| {
|
| yylineno = line_number;
| }
|
| /** Set the input stream. This does not discard the current
| * input buffer.
| * @param in_str A readable stream.
| *
| * @see yy_switch_to_buffer
| */
| void yyset_in (FILE * in_str )
| {
| yyin = in_str ;
| }
|
| void yyset_out (FILE * out_str )
| {
| yyout = out_str ;
| }
|
| int yyget_debug (void)
| {
| return yy_flex_debug;
| }
|
| void yyset_debug (int bdebug )
| {
| yy_flex_debug = bdebug ;
| }
|
| static int yy_init_globals (void)
| {
| /* Initialization is the same as for the non-reentrant scanner.
| * This function is called from yylex_destroy(), so don't allocate here.
| */
|
| (yy_buffer_stack) = 0;
| (yy_buffer_stack_top) = 0;
| (yy_buffer_stack_max) = 0;
| (yy_c_buf_p) = (char *) 0;
| (yy_init) = 0;
| (yy_start) = 0;
|
| (yy_state_buf) = 0;
| (yy_state_ptr) = 0;
| (yy_full_match) = 0;
| (yy_lp) = 0;
|
| /* Defined in main.c */
| #ifdef YY_STDINIT
| yyin = stdin;
| yyout = stdout;
| #else
| yyin = (FILE *) 0;
| yyout = (FILE *) 0;
| #endif
|
| /* For future reference: Set errno on error, since we are called by
| * yylex_init()
| */
| return 0;
| }
|
| /* yylex_destroy is for both reentrant and non-reentrant scanners. */
| int yylex_destroy (void)
| {
|
| /* Pop the buffer stack, destroying each element. */
| while(YY_CURRENT_BUFFER){
| yy_delete_buffer(YY_CURRENT_BUFFER );
| YY_CURRENT_BUFFER_LVALUE = NULL;
| yypop_buffer_state();
| }
|
| /* Destroy the stack itself. */
| yyfree((yy_buffer_stack) );
| (yy_buffer_stack) = NULL;
|
| yyfree ( (yy_state_buf) );
| (yy_state_buf) = NULL;
|
| /* Reset the globals. This is important in a non-reentrant scanner so the next time
| * yylex() is called, initialization will occur. */
| yy_init_globals( );
|
| return 0;
| }
|
| /*
| * Internal utility routines.
| */
|
| #ifndef yytext_ptr
| static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
| {
| register int i;
| for ( i = 0; i < n; ++i )
| s1[i] = s2[i];
| }
| #endif
|
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen (yyconst char * s )
| {
| register int n;
| for ( n = 0; s[n]; ++n )
| ;
|
| return n;
| }
| #endif
|
| void *yyalloc (yy_size_t size )
| {
| return (void *) malloc( size );
| }
|
| void *yyrealloc (void * ptr, yy_size_t size )
| {
| /* The cast to (char *) in the following accommodates both
| * implementations that use char* generic pointers, and those
| * that use void* generic pointers. It works with the latter
| * because both ANSI C and C++ allow castless assignment from
| * any pointer type to void*, and deal with argument conversions
| * as though doing an assignment.
| */
| return (void *) realloc( (char *) ptr, size );
| }
|
| void yyfree (void * ptr )
| {
| free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
| }
|
| #define YYTABLES_NAME "yytables"
|
| #line 9 "conftest.l"
|
|
| #ifdef YYTEXT_POINTER
| extern char *yytext;
| #endif
| int
| main (void)
| {
| return ! yylex () + ! yywrap ();
| }
configure:19503: gcc -o conftest -g -O2 conftest.c -lfl >&5
configure:19509: $? = 0
configure:19530: result: -lfl
configure:19536: checking whether yytext is a pointer
configure:19557: gcc -o conftest -g -O2 conftest.c -lfl >&5
configure:19563: $? = 0
configure:19582: result: yes
configure:19599: checking for perl
configure:19617: found /usr/bin/perl
configure:19629: result: /usr/bin/perl
configure:19639: checking for pod2man
configure:19657: found /usr/bin/pod2man
configure:19669: result: /usr/bin/pod2man
configure:19688: checking for pod2html
configure:19706: found /usr/bin/pod2html
configure:19718: result: /usr/bin/pod2html
configure:19737: checking for htmlview
configure:19770: result: no
configure:19792: checking for flex
configure:19810: found /usr/bin/flex
configure:19822: result: /usr/bin/flex
configure:19832: checking for python
configure:19850: found /usr/bin/python
configure:19862: result: /usr/bin/python
configure:19889: checking for doxygen
configure:19922: result: no
configure:19929: checking for doxygen
configure:19957: result: no
configure:19994: checking for libgnutls-config
configure:20025: result: no
configure:20034: checking for libgnutls - version >= 1.0.0
configure:20169: result: no
configure:20284: checking for libgcrypt-config
configure:20315: result: no
configure:20332: checking for LIBGCRYPT - version >= 1.1.42
configure:20369: result: no
configure:20426: checking for xsltproc
configure:20444: found /usr/bin/xsltproc
configure:20456: result: /usr/bin/xsltproc
configure:20466: checking for xsltproc
configure:20482: found /usr/bin/xsltproc
configure:20494: result: yes
configure:20516: checking for xmllint
configure:20534: found /usr/bin/xmllint
configure:20546: result: /usr/bin/xmllint
configure:20556: checking for xmllint
configure:20572: found /usr/bin/xmllint
configure:20584: result: yes
configure:20606: checking for fop
configure:20639: result: no
configure:20646: checking for fop
configure:20674: result: no
configure:20696: checking for hhc.exe
configure:20729: result: no
configure:20736: checking for hhc.exe
configure:20764: result: no
configure:20788: checking for pkgproto
configure:20816: result: no
configure:20826: checking for pkgmk
configure:20854: result: no
configure:20864: checking for pkgtrans
configure:20892: result: no
configure:20912: checking for rpm
configure:20940: result: no
configure:21477: checking whether we can add -Wall -W to CFLAGS
configure:21499: gcc -c -g -O2 -Wall -W conftest.c >&5
configure:21505: $? = 0
configure:21511: result: yes
configure:21532: checking whether we can add -Wdeclaration-after-statement to CFLAGS
configure:21554: gcc -c -g -O2 -Wall -W -Wdeclaration-after-statement conftest.c >&5
configure:21560: $? = 0
configure:21566: result: yes
configure:21587: checking whether we can add -Wendif-labels to CFLAGS
configure:21609: gcc -c -g -O2 -Wall -W -Wdeclaration-after-statement -Wendif-labels conftest.c >&5
configure:21615: $? = 0
configure:21621: result: yes
configure:21642: checking whether we can add -Wpointer-arith to CFLAGS
configure:21664: gcc -c -g -O2 -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith conftest.c >&5
configure:21670: $? = 0
configure:21676: result: yes
configure:21697: checking whether we can add -Wno-pointer-sign to CFLAGS
configure:21719: gcc -c -g -O2 -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign conftest.c >&5
configure:21725: $? = 0
configure:21731: result: yes
configure:21769: checking whether we should treat compiler warnings as errors
configure:21786: result: no
configure:21805: checking for platform-specific compiler flags
configure:21828: result: none needed
configure:21869: checking for platform-specific linker flags
configure:21903: result: none needed
configure:22011: checking whether to use /usr/local for headers and libraries
configure:22014: result: yes
configure:22072: checking for GNU sed as first sed in PATH
configure:22075: result: yes
configure:22174: checking if profile builds must be generated
configure:22187: result: no
configure:22235: checking for pkg-config
configure:22253: found /aux/bin/pkg-config
configure:22266: result: /aux/bin/pkg-config
configure:22288: checking for GTK+ - version >= 2.0.0
configure:22408: gcc -o conftest -D_U_="__attribute__((unused))" -g -O2 -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -I/usr/local/include -pthread -I/aux/include/gtk-2.0 -I/aux/lib/gtk-2.0/include -I/aux/include/atk-1.0 -I/aux/include/cairo -I/aux/include/pango-1.0 -I/aux/include/glib-2.0 -I/aux/lib/glib-2.0/include -I/usr/local/include -L/usr/local/lib conftest.c -pthread -L/aux/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangocairo-1.0 -lpango-1.0 -lcairo -lgobject-2.0 -lgmodule-2.0 -ldl -lgthread-2.0 -lrt -lglib-2.0 >&5
conftest.c: In function 'main':
conftest.c:70: warning: comparison between signed and unsigned
conftest.c:71: warning: comparison between signed and unsigned
conftest.c:71: warning: comparison between signed and unsigned
conftest.c:72: warning: comparison between signed and unsigned
conftest.c:72: warning: comparison between signed and unsigned
conftest.c:72: warning: comparison between signed and unsigned
configure:22411: $? = 0
configure:22417: ./conftest
configure:22420: $? = 0
configure:22440: result: yes (version 2.10.13)
configure:23571: checking for pkg-config
configure:23602: result: /aux/bin/pkg-config
configure:23626: checking for GLIB - version >= 2.0.0
configure:23750: gcc -o conftest -D_U_="__attribute__((unused))" -g -O2 -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -I/usr/local/include -pthread -I/aux/include/gtk-2.0 -I/aux/lib/gtk-2.0/include -I/aux/include/atk-1.0 -I/aux/include/cairo -I/aux/include/pango-1.0 -I/aux/include/glib-2.0 -I/aux/lib/glib-2.0/include -I/aux/include/glib-2.0 -I/aux/lib/glib-2.0/include -I/usr/local/include -L/usr/local/lib conftest.c -Wl,--export-dynamic -L/aux/lib -lgmodule-2.0 -ldl -lglib-2.0 >&5
conftest.c: In function 'main':
conftest.c:70: warning: comparison between signed and unsigned
conftest.c:71: warning: comparison between signed and unsigned
conftest.c:71: warning: comparison between signed and unsigned
conftest.c:72: warning: comparison between signed and unsigned
conftest.c:72: warning: comparison between signed and unsigned
conftest.c:72: warning: comparison between signed and unsigned
configure:23753: $? = 0
configure:23759: ./conftest
configure:23762: $? = 0
configure:23782: result: yes (version 2.12.13)
configure:24209: checking whether GLib supports loadable modules
configure:24247: gcc -o conftest -D_U_="__attribute__((unused))" -g -O2 -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -I/usr/local/include -pthread -I/aux/include/gtk-2.0 -I/aux/lib/gtk-2.0/include -I/aux/include/atk-1.0 -I/aux/include/cairo -I/aux/include/pango-1.0 -I/aux/include/glib-2.0 -I/aux/lib/glib-2.0/include -I/aux/include/glib-2.0 -I/aux/lib/glib-2.0/include -I/usr/local/include -L/usr/local/lib conftest.c -Wl,--export-dynamic -L/aux/lib -lgmodule-2.0 -ldl -lglib-2.0 >&5
configure:24250: $? = 0
configure:24256: ./conftest
configure:24259: $? = 0
configure:24277: result: yes
configure:24295: checking for inttypes.h
configure:24301: result: yes
configure:24429: checking whether inttypes.h defines the PRI[doxu]64 macros
configure:24461: gcc -c -D_U_="__attribute__((unused))" -g -O2 -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -I/usr/local/include -pthread -I/aux/include/gtk-2.0 -I/aux/lib/gtk-2.0/include -I/aux/include/atk-1.0 -I/aux/include/cairo -I/aux/include/pango-1.0 -I/aux/include/glib-2.0 -I/aux/lib/glib-2.0/include -I/usr/local/include conftest.c >&5
conftest.c:33: warning: return type defaults to 'int'
conftest.c: In function 'main':
conftest.c:39: warning: control reaches end of non-void function
configure:24467: $? = 0
configure:24473: result: yes
configure:24977: checking for gethostbyname
configure:25033: gcc -o conftest -D_U_="__attribute__((unused))" -g -O2 -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -I/usr/local/include -pthread -I/aux/include/gtk-2.0 -I/aux/lib/gtk-2.0/include -I/aux/include/atk-1.0 -I/aux/include/cairo -I/aux/include/pango-1.0 -I/aux/include/glib-2.0 -I/aux/lib/glib-2.0/include -I/usr/local/include -L/usr/local/lib conftest.c >&5
configure:25039: $? = 0
configure:25056: result: yes
configure:25139: checking for connect
configure:25195: gcc -o conftest -D_U_="__attribute__((unused))" -g -O2 -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -I/usr/local/include -pthread -I/aux/include/gtk-2.0 -I/aux/lib/gtk-2.0/include -I/aux/include/atk-1.0 -I/aux/include/cairo -I/aux/include/pango-1.0 -I/aux/include/glib-2.0 -I/aux/lib/glib-2.0/include -I/usr/local/include -L/usr/local/lib conftest.c >&5
configure:25201: $? = 0
configure:25218: result: yes
configure:25297: checking whether to use libpcap for packet capture
configure:25326: result: yes
configure:25408: checking pcap.h usability
configure:25425: gcc -c -D_U_="__attribute__((unused))" -g -O2 -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -I/usr/local/include -pthread -I/aux/include/gtk-2.0 -I/aux/lib/gtk-2.0/include -I/aux/include/atk-1.0 -I/aux/include/cairo -I/aux/include/pango-1.0 -I/aux/include/glib-2.0 -I/aux/lib/glib-2.0/include -I/usr/include -I/usr/local/include -I/usr/include conftest.c >&5
configure:25431: $? = 0
configure:25445: result: yes
configure:25449: checking pcap.h presence
configure:25464: gcc -E -I/usr/local/include -I/usr/include conftest.c
configure:25470: $? = 0
configure:25484: result: yes
configure:25512: checking for pcap.h
configure:25519: result: yes
configure:25544: checking for pcap_open_live in -lpcap
configure:25579: gcc -o conftest -D_U_="__attribute__((unused))" -g -O2 -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -I/usr/local/include -pthread -I/aux/include/gtk-2.0 -I/aux/lib/gtk-2.0/include -I/aux/include/atk-1.0 -I/aux/include/cairo -I/aux/include/pango-1.0 -I/aux/include/glib-2.0 -I/aux/lib/glib-2.0/include -I/usr/include -I/usr/local/include -I/usr/include -L/usr/local/lib -L/usr/lib conftest.c -lpcap >&5
/usr/local/lib/libpcap.a(grammar.o): In function `.L42':
grammar.c:(.text+0x4d3): undefined reference to `pcap_lex'
collect2: ld returned 1 exit status
configure:25585: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "wireshark"
| #define VERSION "0.99.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define YYTEXT_POINTER 1
| #define HTML_VIEWER "mozilla"
| #define DATAFILE_DIR "/aux/share/wireshark"
| #define HAVE_INTTYPES_H 1
| #define INTTYPES_H_DEFINES_FORMATS
| /* end confdefs.h. */
|
| /* Override any GCC internal prototype to avoid an error.
| Use char because int might match the return type of a GCC
| builtin and then its argument prototype would still apply. */
| #ifdef __cplusplus
| extern "C"
| #endif
| char pcap_open_live ();
| int
| main ()
| {
| return pcap_open_live ();
| ;
| return 0;
| }
configure:25603: result: no
configure:25620: checking for pcap_open_live in -lpcap with -lcfg -lodm
configure:25651: gcc -o conftest -D_U_="__attribute__((unused))" -g -O2 -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -I/usr/local/include -pthread -I/aux/include/gtk-2.0 -I/aux/lib/gtk-2.0/include -I/aux/include/atk-1.0 -I/aux/include/cairo -I/aux/include/pango-1.0 -I/aux/include/glib-2.0 -I/aux/lib/glib-2.0/include -I/usr/include -I/usr/local/include -I/usr/include -L/usr/local/lib -L/usr/lib conftest.c -lpcap -lcfg -lodm >&5
/usr/bin/ld: cannot find -lcfg
collect2: ld returned 1 exit status
configure:25657: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "wireshark"
| #define VERSION "0.99.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define YYTEXT_POINTER 1
| #define HTML_VIEWER "mozilla"
| #define DATAFILE_DIR "/aux/share/wireshark"
| #define HAVE_INTTYPES_H 1
| #define INTTYPES_H_DEFINES_FORMATS
| /* end confdefs.h. */
|
| # include <pcap.h>
|
| int
| main ()
| {
|
| pcap_open_live(NULL, 0, 0, 0, NULL);
|
| ;
| return 0;
| }
configure:25679: result: no
configure:25620: checking for pcap_open_live in -lpcap with -lpfring
configure:25651: gcc -o conftest -D_U_="__attribute__((unused))" -g -O2 -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -I/usr/local/include -pthread -I/aux/include/gtk-2.0 -I/aux/lib/gtk-2.0/include -I/aux/include/atk-1.0 -I/aux/include/cairo -I/aux/include/pango-1.0 -I/aux/include/glib-2.0 -I/aux/lib/glib-2.0/include -I/usr/include -I/usr/local/include -I/usr/include -L/usr/local/lib -L/usr/lib conftest.c -lpcap -lpfring >&5
/usr/bin/ld: cannot find -lpfring
collect2: ld returned 1 exit status
configure:25657: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "wireshark"
| #define VERSION "0.99.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define YYTEXT_POINTER 1
| #define HTML_VIEWER "mozilla"
| #define DATAFILE_DIR "/aux/share/wireshark"
| #define HAVE_INTTYPES_H 1
| #define INTTYPES_H_DEFINES_FORMATS
| /* end confdefs.h. */
|
| # include <pcap.h>
|
| int
| main ()
| {
|
| pcap_open_live(NULL, 0, 0, 0, NULL);
|
| ;
| return 0;
| }
configure:25679: result: no
configure:25693: error: Can't link with library libpcap.
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=i686-pc-linux-gnu
ac_cv_c_compiler_gnu=yes
ac_cv_cxx_compiler_gnu=no
ac_cv_enable_usr_local=yes
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_F77_set=
ac_cv_env_F77_value=
ac_cv_env_FFLAGS_set=
ac_cv_env_FFLAGS_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_YACC_set=
ac_cv_env_YACC_value=
ac_cv_env_YFLAGS_set=
ac_cv_env_YFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_f77_compiler_gnu=no
ac_cv_func_connect=yes
ac_cv_func_dlopen=no
ac_cv_func_gethostbyname=yes
ac_cv_func_shl_load=no
ac_cv_glib_supports_modules=yes
ac_cv_header_dlfcn_h=yes
ac_cv_header_inttypes_h=yes
ac_cv_header_memory_h=yes
ac_cv_header_pcap_h=yes
ac_cv_header_stdc=yes
ac_cv_header_stdint_h=yes
ac_cv_header_stdlib_h=yes
ac_cv_header_string_h=yes
ac_cv_header_strings_h=yes
ac_cv_header_sys_stat_h=yes
ac_cv_header_sys_types_h=yes
ac_cv_header_unistd_h=yes
ac_cv_host=i686-pc-linux-gnu
ac_cv_lib_dl_dlopen=yes
ac_cv_lib_dld_shl_load=no
ac_cv_lib_lex=-lfl
ac_cv_lib_pcap_pcap_open_live=no
ac_cv_objext=o
ac_cv_path_EGREP='/bin/grep -E'
ac_cv_path_GREP=/bin/grep
ac_cv_path_LEX=/usr/bin/flex
ac_cv_path_LIBGCRYPT_CONFIG=no
ac_cv_path_LIBGNUTLS_CONFIG=no
ac_cv_path_PERL=/usr/bin/perl
ac_cv_path_PKG_CONFIG=/aux/bin/pkg-config
ac_cv_path_POD2HTML=/usr/bin/pod2html
ac_cv_path_POD2MAN=/usr/bin/pod2man
ac_cv_path_PYTHON=/usr/bin/python
ac_cv_path_XMLLINT=/usr/bin/xmllint
ac_cv_path_XSLTPROC=/usr/bin/xsltproc
ac_cv_path_install='/usr/bin/install -c'
ac_cv_prog_AWK=mawk
ac_cv_prog_CPP='gcc -E'
ac_cv_prog_HAVE_DOXYGEN=no
ac_cv_prog_HAVE_FOP=no
ac_cv_prog_HAVE_HHC=no
ac_cv_prog_HAVE_PKGMK=no
ac_cv_prog_HAVE_PKGPROTO=no
ac_cv_prog_HAVE_PKGTRANS=no
ac_cv_prog_HAVE_XMLLINT=yes
ac_cv_prog_HAVE_XSLTPROC=yes
ac_cv_prog_LEX=flex
ac_cv_prog_YACC='bison -y'
ac_cv_prog_ac_ct_AR=ar
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_ac_ct_RANLIB=ranlib
ac_cv_prog_ac_ct_STRIP=strip
ac_cv_prog_ac_cv_wireshark_have_rpm=no
ac_cv_prog_cc_c89=
ac_cv_prog_cc_g=yes
ac_cv_prog_cxx_g=no
ac_cv_prog_f77_g=no
ac_cv_prog_lex_root=lex.yy
ac_cv_prog_lex_yytext_pointer=yes
ac_cv_prog_make_make_set=yes
ac_cv_target=i686-pc-linux-gnu
ac_cv_wireshark_have_rpm=no
am_cv_CC_dependencies_compiler_type=gcc3
am_cv_CXX_dependencies_compiler_type=none
lt_cv_deplibs_check_method=pass_all
lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=-ldl
lt_cv_dlopen_self=yes
lt_cv_dlopen_self_static=no
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_ld_reload_flag=-r
lt_cv_objdir=.libs
lt_cv_path_LD=/usr/bin/ld
lt_cv_path_NM='/usr/bin/nm -B'
lt_cv_path_SED=/bin/sed
lt_cv_prog_compiler_c_o=yes
lt_cv_prog_compiler_rtti_exceptions=no
lt_cv_prog_gnu_ld=yes
lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'''
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^. .* \(.*\)$/extern int \1;/p'\'''
lt_cv_sys_max_cmd_len=32768
lt_lt_cv_prog_compiler_c_o='"yes"'
lt_lt_cv_sys_global_symbol_pipe='"sed -n -e '\''s/^.*[ ]\\([ABCDGIRSTW][ABCDGIRSTW]*\\)[ ][ ]*\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2 \\2/p'\''"'
lt_lt_cv_sys_global_symbol_to_c_name_address='"sed -n -e '\''s/^: \\([^ ]*\\) \$/ {\\\"\\1\\\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (lt_ptr) \\&\\2},/p'\''"'
lt_lt_cv_sys_global_symbol_to_cdecl='"sed -n -e '\''s/^. .* \\(.*\\)\$/extern int \\1;/p'\''"'
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='${SHELL} /wireshark-0.99.6/missing --run aclocal-1.9'
ADNS_LIBS=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='${SHELL} /wireshark-0.99.6/missing --run tar'
AR='ar'
AUTOCONF='${SHELL} /wireshark-0.99.6/missing --run autoconf'
AUTOHEADER='${SHELL} /wireshark-0.99.6/missing --run autoheader'
AUTOMAKE='${SHELL} /wireshark-0.99.6/missing --run automake-1.9'
AWK='mawk'
CC='gcc'
CCDEPMODE='depmode=gcc3'
CC_FOR_BUILD='gcc'
CFLAGS='-D_U_="__attribute__((unused))" -g -O2 -Wall -W -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -I/usr/local/include -pthread -I/aux/include/gtk-2.0 -I/aux/lib/gtk-2.0/include -I/aux/include/atk-1.0 -I/aux/include/cairo -I/aux/include/pango-1.0 -I/aux/include/glib-2.0 -I/aux/lib/glib-2.0/include -I/usr/include'
CPP='gcc -E'
CPPFLAGS=' -I/usr/local/include -I/usr/include'
CXX='g++'
CXXCPP=''
CXXDEPMODE='depmode=none'
CXXFLAGS=''
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DOXYGEN=''
ECHO='echo'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='/bin/grep -E'
ENABLE_STATIC=''
ENABLE_STATIC_FALSE=''
ENABLE_STATIC_TRUE=''
EXEEXT=''
F77=''
FFLAGS=''
FLEX_PATH=''
FOP=''
FRAMEWORKS=''
GETOPT_C=''
GETOPT_O=''
GLIB_CFLAGS='-I/aux/include/glib-2.0 -I/aux/lib/glib-2.0/include '
GLIB_CONFIG=''
GLIB_GENMARSHAL='glib-genmarshal'
GLIB_LIBS='-Wl,--export-dynamic -L/aux/lib -lgmodule-2.0 -ldl -lglib-2.0 '
GLIB_MKENUMS='glib-mkenums'
GOBJECT_QUERY='gobject-query'
GREP='/bin/grep'
GTK_CFLAGS='-pthread -I/aux/include/gtk-2.0 -I/aux/lib/gtk-2.0/include -I/aux/include/atk-1.0 -I/aux/include/cairo -I/aux/include/pango-1.0 -I/aux/include/glib-2.0 -I/aux/lib/glib-2.0/include '
GTK_CONFIG=''
GTK_LIBS='-pthread -L/aux/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangocairo-1.0 -lpango-1.0 -lcairo -lgobject-2.0 -lgmodule-2.0 -ldl -lgthread-2.0 -lrt -lglib-2.0 '
G_ASCII_STRTOULL_C=''
G_ASCII_STRTOULL_LO=''
G_ASCII_STRTOULL_O=''
HAVE_DOXYGEN='no'
HAVE_DOXYGEN_FALSE=''
HAVE_DOXYGEN_TRUE='#'
HAVE_FOP='no'
HAVE_FOP_FALSE=''
HAVE_FOP_TRUE='#'
HAVE_HHC='no'
HAVE_HHC_FALSE=''
HAVE_HHC_TRUE='#'
HAVE_LIBLUA_FALSE=''
HAVE_LIBLUA_TRUE=''
HAVE_LIBPORTAUDIO_FALSE=''
HAVE_LIBPORTAUDIO_TRUE=''
HAVE_PKGMK='no'
HAVE_PKGPROTO='no'
HAVE_PKGTRANS='no'
HAVE_PLUGINS_FALSE=''
HAVE_PLUGINS_TRUE=''
HAVE_RPM=''
HAVE_SVR4_PACKAGING='no'
HAVE_WARNINGS_AS_ERRORS_FALSE=''
HAVE_WARNINGS_AS_ERRORS_TRUE='#'
HAVE_XMLLINT='yes'
HAVE_XMLLINT_FALSE='#'
HAVE_XMLLINT_TRUE=''
HAVE_XSLTPROC='yes'
HAVE_XSLTPROC_FALSE='#'
HAVE_XSLTPROC_TRUE=''
HHC=''
HTML_VIEWER=''
INET_ATON_C=''
INET_ATON_LO=''
INET_ATON_O=''
INET_NTOP_C=''
INET_NTOP_LO=''
INET_NTOP_O=''
INET_PTON_C=''
INET_PTON_LO=''
INET_PTON_O=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s'
KRB5_CONFIG=''
KRB5_LIBS=''
LDFLAGS=' -L/usr/local/lib -L/usr/lib'
LDFLAGS_SHAREDLIB=''
LEX='/usr/bin/flex'
LEXLIB='-lfl'
LEX_OUTPUT_ROOT='lex.yy'
LIBGCRYPT_CFLAGS=''
LIBGCRYPT_CONFIG='no'
LIBGCRYPT_LIBS=''
LIBGNUTLS_CFLAGS=''
LIBGNUTLS_CONFIG='no'
LIBGNUTLS_LIBS=''
LIBICONV=''
LIBOBJS=''
LIBS='-lpcap -lpfring'
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
LIBTOOL_DEPS='./ltmain.sh'
LN_S='ln -s'
LTLIBOBJS=''
LUA_INCLUDES=''
LUA_LIBS=''
MAKEINFO='${SHELL} /wireshark-0.99.6/missing --run makeinfo'
MKSTEMP_C=''
MKSTEMP_O=''
NETSNMPCONFIG=''
NSL_LIBS=''
OBJEXT='o'
PACKAGE='wireshark'
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
PCAP_LIBS=''
PCRE_LIBS=''
PERL='/usr/bin/perl'
PKG_CONFIG='/aux/bin/pkg-config'
PLUGIN_LIBS=''
POD2HTML='/usr/bin/pod2html'
POD2MAN='/usr/bin/pod2man'
PORTAUDIO_INCLUDES=''
PORTAUDIO_LIBS=''
PYTHON='/usr/bin/python'
RANLIB='ranlib'
SETUID_INSTALL_FALSE=''
SETUID_INSTALL_TRUE=''
SET_MAKE=''
SHELL='/bin/bash'
SNMP_LIBS=''
SOCKET_LIBS=''
SSL_LIBS=''
STRCASECMP_C=''
STRCASECMP_O=''
STRERROR_C=''
STRERROR_O=''
STRIP='strip'
STRNCASECMP_C=''
STRNCASECMP_O=''
STRPTIME_C=''
STRPTIME_O=''
USE_GTK2_FALSE='#'
USE_GTK2_TRUE=''
USE_PROFILE_BUILD_FALSE=''
USE_PROFILE_BUILD_TRUE='#'
USE_THREADS_FALSE=''
USE_THREADS_TRUE='#'
VERSION='0.99.6'
XMLLINT='/usr/bin/xmllint'
XSLTPROC='/usr/bin/xsltproc'
YACC='bison -y'
YFLAGS=''
ac_ct_CC='gcc'
ac_ct_CXX=''
ac_ct_F77=''
ac_cv_wireshark_have_rpm='no'
am__fastdepCC_FALSE='#'
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE=''
am__fastdepCXX_TRUE='#'
am__include='include'
am__leading_dot='.'
am__quote=''
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
bindir='${exec_prefix}/bin'
build='i686-pc-linux-gnu'
build_alias=''
build_cpu='i686'
build_os='linux-gnu'
build_vendor='pc'
capinfos_bin='capinfos$(EXEEXT)'
capinfos_man='capinfos.1'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
dftest_bin='dftest$(EXEEXT)'
docdir='${datarootdir}/doc/${PACKAGE}'
dumpcap_bin='dumpcap$(EXEEXT)'
dumpcap_man='dumpcap.1'
dvidir='${docdir}'
editcap_bin='editcap$(EXEEXT)'
editcap_man='editcap.1'
exec_prefix='NONE'
host='i686-pc-linux-gnu'
host_alias=''
host_cpu='i686'
host_os='linux-gnu'
host_vendor='pc'
htmldir='${docdir}'
idl2wrs_bin='idl2wrs'
idl2wrs_man='idl2wrs.1'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='/wireshark-0.99.6/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mergecap_bin='mergecap$(EXEEXT)'
mergecap_man='mergecap.1'
mkdir_p='mkdir -p --'
oldincludedir='/usr/include'
pdfdir='${docdir}'
plugindir=''
prefix='/aux'
program_transform_name='s,x,x,'
psdir='${docdir}'
randpkt_bin='randpkt$(EXEEXT)'
rdps_bin='rdps$(EXEEXT)'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
subdirs=''
sysconfdir='${prefix}/etc'
target='i686-pc-linux-gnu'
target_alias=''
target_cpu='i686'
target_os='linux-gnu'
target_vendor='pc'
text2pcap_bin='text2pcap$(EXEEXT)'
text2pcap_man='text2pcap.1'
tshark_bin='tshark$(EXEEXT)'
tshark_man='tshark.1'
wireshark_SUBDIRS='codecs gtk'
wireshark_bin='wireshark$(EXEEXT)'
wireshark_man='wireshark.1'
wiresharkfilter_man='wireshark-filter.4'
## ----------- ##
## confdefs.h. ##
## ----------- ##
#define PACKAGE_NAME ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#define PACKAGE_STRING ""
#define PACKAGE_BUGREPORT ""
#define PACKAGE "wireshark"
#define VERSION "0.99.6"
#define STDC_HEADERS 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRING_H 1
#define HAVE_MEMORY_H 1
#define HAVE_STRINGS_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_STDINT_H 1
#define HAVE_UNISTD_H 1
#define HAVE_DLFCN_H 1
#define YYTEXT_POINTER 1
#define HTML_VIEWER "mozilla"
#define DATAFILE_DIR "/aux/share/wireshark"
#define HAVE_INTTYPES_H 1
#define INTTYPES_H_DEFINES_FORMATS
configure: exit 1
- Follow-Ups:
- Re: [Wireshark-users] Configure problem with pcap_open_live
- From: Guy Harris
- Re: [Wireshark-users] Configure problem with pcap_open_live
- Prev by Date: Re: [Wireshark-users] Exporting objects with invalid default filenames
- Next by Date: [Wireshark-users] K12 capture file problems
- Previous by thread: Re: [Wireshark-users] Exporting objects with invalid default filenames
- Next by thread: Re: [Wireshark-users] Configure problem with pcap_open_live
- Index(es):
- Get Wireshark
- Download
- Code of Conduct