Huge thanks to our Platinum Members Endace and LiveAction,
and our Silver Member Veeam, for supporting the Wireshark Foundation and project.

Wireshark-dev: Re: [Wireshark-dev] Deprecating nmake

From: "RobiOneKenobi" <robionekenobi@xxxxxxxxxx>
Date: Sun, 3 Apr 2016 15:56:53 +0200

Hi,

 

I had CMake 3.5.1 x86 installed, so I de-installed it and installed Cmake 3.5.1 x64.

 

The error is always the same L

 

Win64

Didn’t find python module

 

Win32  

Didn’t find FEATURE_SUMMARY

 

Robert

 

 

From: wireshark-dev-bounces@xxxxxxxxxxxxx [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of Pascal Quantin
Sent: Sunday, April 3, 2016 1:08 PM
To: Developer support list for Wireshark <wireshark-dev@xxxxxxxxxxxxx>
Subject: Re: [Wireshark-dev] Deprecating nmake

 

 

 

2016-04-03 11:21 GMT+02:00 RobiOneKenobi <robionekenobi@xxxxxxxxxx>:

Hi,

Checked path and only the python 2.7 (c:\pythoin27) is used. What is
surprising, is that the Win32 Config works for python, but not the Win64
Config.

 

Have you installed the 32 bits of 64 bits variant of Python? On muy side I installed the 64bits version and CMake 3.5.1 has no issue locating it when building Wireshark for x86 or x64.


The second error (when Win32 Config) mean that the FEATURE_SUMMARY is at no
place (I made a search in all files in the WS Source Dir, and it is found in
only one place (where it is called and bringing the error))

Robert

-----Original Message-----
From: wireshark-dev-bounces@xxxxxxxxxxxxx
[mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of Roland Knall
Sent: Saturday, April 2, 2016 6:00 PM
To: Developer support list for Wireshark <wireshark-dev@xxxxxxxxxxxxx>

Subject: Re: [Wireshark-dev] Deprecating nmake

Try to set the path to the Python Executable in cmake. Seems he catches the
Cygwin version by mistake.

Regards

> Am 02.04.2016 um 16:07 schrieb RobiOneKenobi <robionekenobi@xxxxxxxxxx>:
>
> Hi,
>
> I'm trying to migrate to CMake, but i'm facing 2 problems
>
> In Win64, it stops after a few lines with:
>
> CMake Error at cmake/modules/LocatePythonModule.cmake:45 (message):
>  Could NOT find python module asn2wrs
> Call Stack (most recent call first):
>  cmake/modules/UseAsn2Wrs.cmake:9 (locate_python_module)
>  CMakeLists.txt:205 (include)
> -- Configuring incomplete, errors occurred!
>
>
> In Win32, it goes further (as it find the python module) but stops later:
>
> CMake Error at CMakeLists.txt:1225 (FEATURE_SUMMARY):
>  Unknown CMake command "FEATURE_SUMMARY".
> -- Configuring incomplete, errors occurred!
>
> Thanks for your help
> Robert
>
> -----Original Message-----
> From: wireshark-dev-bounces@xxxxxxxxxxxxx
> [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of Gerald Combs
> Sent: Wednesday, March 23, 2016 6:54 PM
> To: Developer support list for Wireshark <wireshark-dev@xxxxxxxxxxxxx>
> Subject: [Wireshark-dev] Deprecating nmake
>
> Wireshark currently uses four build systems: GNU Autotools, CMake, and
nmake
> (which in turn depends on QMake). In order to preserve sanity and reduce
> development friction it would be nice if we could remove the last two.
>
> Toward that end I have a pending change at
> https://code.wireshark.org/review/#/c/14591/ which generates an error if
you
> try to build using nmake. You can disable the error by setting
> YES_I_KNOW_ABOUT_THE_DEPRECATION, either on the command line or in
> config.nmake. I plan on submitting it on Friday. I also plan on removing
the
> remaining nmake steps from the master and master-2.0 buildbots some time
> today.
>
> The next step will be the removal of the various Makefile.nmakes and
related
> files from Git. This is tentatively planned for some time in June, either
> immediately before or after Sharkfest in order to give people plenty of
time
> to migrate to CMake. Note that the master-2.2 branch will likely not
include
> nmake support from its inception.
>
> If you're still using nmake you should definitely plan on migrating to
CMake
> by June. The Developer's Guide has been updated to include instructions
for
> CMake:
>
> https://www.wireshark.org/docs/wsdg_html_chunked/ChSetupWin32.html
>
> If you run into any issues don't hesitate to send a message to
wireshark-dev
> or post a question on ask.wireshark.org. Many of us will also be at
> Sharkfest and should be able to help in person.
>
___________________________________________________________________________
> Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
> Archives:    https://www.wireshark.org/lists/wireshark-dev
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>             mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe
> <CMakeWS_Win32_Out.txt>
> <CMakeWS_Win64_Out.txt>
>
___________________________________________________________________________
> Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
> Archives:    https://www.wireshark.org/lists/wireshark-dev
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>             mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe
___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives:    https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
             mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives:    https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
             mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe