Wireshark-dev: [Wireshark-dev] Wireshark 1.99.8 is now available
From: Gerald Combs <[email protected]>
Date: Fri, 24 Jul 2015 11:58:42 -0700
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I'm proud to announce the release of Wireshark 1.99.8. This is a semi-experimental release intended to test new features for Wireshark 2.0. __________________________________________________________________ What is Wireshark? Wireshark is the world's most popular network protocol analyzer. It is used for troubleshooting, analysis, development and education. __________________________________________________________________ What's New New and Updated Features The following features are new (or have been significantly updated) since version 1.99.7: * Qt port: + The Enabled Protocols dialog has been added. + Many statistics dialogs have been added, including Service response time, DHCP/BOOTP, and ANSI. + The RTP Analysis dialog has been added. + Lua dialog support has been added. + You can now manually resolve addresses. + The Resolved Addresses dialog has been added. + The packet list scrollbar now has a minimap. + The capture interfaces dialog has been updated. + You can now colorize conversations. + Welcome screen behavior has been improved. + Plugin support has been improved. + Many dialogs should now more correctly minimize and maximize. + The reload button has been added back to the toolbar. + The "Decode As" dialog no longer saves decoding behavior. + You can now stop loading large capture files. + The Bluetooth HCI Summary has been added. The following features are new (or have been significantly updated) since version 1.99.6: * Qt port: + The Bluetooth Devices dialog has been added. + The wireless toolbar has been added. + Opening files via drag and drop is now supported. + The Capture Filter and Display Filter dialogs have been added. + The Display Filter Expression dialog has been added. + Conversation Filter menu items have been added. + You can change protocol preferences by right clicking on the packet list and details. The following features are new (or have been significantly updated) since version 1.99.4 and 1.99.5: * Qt port: + Capture restarts are now supported. + Menu items for plugins are now supported. + Extcap interfaces are now supported. + The Expert Information dialog has been added. + Display and capture filter completion is now supported. + Many bugs have been fixed. + Translations have been updated. The following features are new (or have been significantly updated) since version 1.99.3: * Qt port: + Several interface bugs have been fixed. + Translations have been updated. The following features are new (or have been significantly updated) since version 1.99.2: * Qt port: + Several bugs have been fixed. + You can now open a packet in a new window. + The Bluetooth ATT Server Attributes dialog has been added. + The Coloring Rules dialog has been added. + Many translations have been updated. Chinese, Italian and Polish translations are complete. + General user interface and usability improvements. + Automatic scrolling during capture now works. + The related packet indicator has been updated. The following features are new (or have been significantly updated) since version 1.99.1: * Qt port: + The welcome screen layout has been updated. + The Preferences dialog no longer crashes on Windows. + The packet list header menu has been added. + Statistics tree plugins are now supported. + The window icon is now displayed properly in the Windows taskbar. + A packet list an byte view selection bug has been fixed (Bug 10896) + The RTP Streams dialog has been added. + The Protocol Hierarchy Statistics dialog has been added. The following features are new (or have been significantly updated) since version 1.99.0: * Qt port: + You can now show and hide toolbars and major widgets using the View menu. + You can now set the time display format and precision. + The byte view widget is much faster, particularly when selecting large reassembled packets. + The byte view is explorable. Hovering over it highlights the corresponding field and shows a description in the status bar. + An Italian translation has been added. + The Summary dialog has been updated and renamed to Capture File Properties. + The VoIP Calls and SIP Flows dialogs have been added. + Support for HiDPI / Retina displays has been improved in the official packages. * DNS stats: + A new stats tree has been added to the Statistics menu. Now it is possible to collect stats such as qtype/qclass distribution, number of resource record per response section, and stats data (min, max, avg) for values such as query name length or DNS payload. * HPFEEDS stats: + A new stats tree has been added to the statistics menu. Now it is possible to collect stats per channel (messages count and payload size), and opcode distribution. * HTTP2 stats: + A new stats tree has been added to the statistics menu. Now it is possible to collect stats (type distribution). The following features are new (or have been significantly updated) since version 1.12.0: * The I/O Graph in the Gtk+ UI now supports an unlimited number of data points (up from 100k). * TShark now resets its state when changing files in ring-buffer mode. * Expert Info severities can now be configured. * Wireshark now supports external capture interfaces. External capture interfaces can be anything from a tcpdump-over-ssh pipe to a program that captures from proprietary or non-standard hardware. This functionality is not available in the Qt UI yet. * Qt port: + The Qt UI is now the default (program name is wireshark). + A Polish translation has been added. + The Interfaces dialog has been added. + The interface list is now updated when interfaces appear or disappear. + The Conversations and Endpoints dialogs have been added. + A Japanese translation has been added. + It is now possible to manage remote capture interfaces. + Windows: taskbar progress support has been added. + Most toolbar actions are in place and work. + More command line options are now supported New Protocol Support (LISP) TCP Control Message, Aeron, AllJoyn Reliable Datagram Protocol, Android ADB, Android Logcat text, Apache Tribes Heartbeat, BGP Monitoring Prototol (BMP), C15 Call History Protocol dissection (C15ch), ceph, corosync/totemnet corosync cluster engine ( lowest levelencryption/decryption protocol), corosync/totemsrp corosync cluster engine ( totem single ring protocol), Couchbase, CP "Cooper" 2179, DJI UAV Drone Control Protocol, Dynamic Source Routing (RFC 4728), Elasticsearch, ETSI Card Application Toolkit - Transport Protocol, eXpressive Internet Protocol (XIP), Generic Network Virtualization Encapsulation (Geneve), Geospatial and Imagery Access Service (GIAS), GVSP GigE Vision (TM) Streaming Protocol, HCrt, HiQnet, IP Detail Record (IPDR), IPMI Trace, iSER, KNXnetIP, MACsec Key Agreement - EAPoL-MKA, MCPE (Minecraft Pocket Edition), Network File System over Remote Direct Memory Access (NFSoRDMA), OCFS2, OptoMMP, Performance Co-Pilot Proxy, QNEX6 (QNET), RakNet games library, Remote Shared Virtual Disk - RSVD, Riemann, S7 Communication, Secure Socket Tunnel Protocol (SSTP), Shared Memory Communications - RDMA, Stateless Transport Tunneling, Thrift, Video Services over IP (VSIP), and ZVT Kassenschnittstelle Updated Protocol Support Too many protocols have been updated to list here. New and Updated Capture File Support 3GPP Nettrace TS 34 423, Android Logcat text files, Colasoft Capsa files, Netscaler 3.5, and Wireshark now supports nanosecond timestamp resolution in PCAP-NG files. New and Updated Capture Interfaces support and Androiddump - provide interfaces to capture (Logcat and Bluetooth) from connected Android devices Major API Changes The libwireshark API has undergone some major changes: * The emem framework (including all ep_ and se_ memory allocation routines) has been completely removed in favour of wmem which is now fully mature. * The (long-since-broken) Python bindings support has been removed. If you want to write dissectors in something other than C, use Lua. * Plugins can now create GUI menu items. * Heuristic dissectors can now be globally enabled/disabled so heur_dissector_add() has a few more parameters to make that possible __________________________________________________________________ Getting Wireshark Wireshark source code and installation packages are available from https://www.wireshark.org/download.html. Vendor-supplied Packages Most Linux and Unix vendors supply their own Wireshark packages. You can usually install or upgrade Wireshark using the package management system specific to that platform. A list of third-party packages can be found on the download page on the Wireshark web site. __________________________________________________________________ File Locations Wireshark and TShark look in several different locations for preference files, plugins, SNMP MIBS, and RADIUS dictionaries. These locations vary from platform to platform. You can use About->Folders to find the default locations on your system. __________________________________________________________________ Known Problems Dumpcap might not quit if Wireshark or TShark crashes. (Bug 1419) The BER dissector might infinitely loop. (Bug 1516) Capture filters aren't applied when capturing from named pipes. (Bug 1814) Filtering tshark captures with read filters (-R) no longer works. (Bug 2234) Resolving (Bug 9044) reopens (Bug 3528) so that Wireshark no longer automatically decodes gzip data when following a TCP stream. Application crash when changing real-time option. (Bug 4035) Hex pane display issue after startup. (Bug 4056) Packet list rows are oversized. (Bug 4357) Wireshark and TShark will display incorrect delta times in some cases. (Bug 4985) The 64-bit version of Wireshark will leak memory on Windows when the display depth is set to 16 bits (Bug 9914) Wireshark should let you work with multiple capture files. (Bug 10488) __________________________________________________________________ Getting Help Community support is available on Wireshark's Q&A site and on the wireshark-users mailing list. Subscription information and archives for all of Wireshark's mailing lists can be found on the web site. Official Wireshark training and certification are available from Wireshark University. __________________________________________________________________ Frequently Asked Questions A complete FAQ is available on the Wireshark web site. __________________________________________________________________ Last updated 2015-07-24 18:43:27 UTC References 1. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=10896 2. https://www.wireshark.org/download.html 3. https://www.wireshark.org/download.html#thirdparty 4. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=1419 5. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=1516 6. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=1814 7. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=2234 8. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=9044 9. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=3528 10. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=4035 11. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=4056 12. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=4357 13. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=4985 14. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=9914 15. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=10488 16. https://ask.wireshark.org/ 17. https://www.wireshark.org/lists/ 18. http://www.wiresharktraining.com/ 19. https://www.wireshark.org/faq.html Digests wireshark-1.99.8.tar.bz2: 30291568 bytes MD5(wireshark-1.99.8.tar.bz2)=1d15377bfc363e46cd7acf479c989075 SHA1(wireshark-1.99.8.tar.bz2)=b4eb673f580c0e2f0e9f2a834c3df2e973cce991 RIPEMD160(wireshark-1.99.8.tar.bz2)=06100e0e858bbfea74f5badac8b354b79dd347f2 Wireshark-win32-1.99.8.exe: 36878928 bytes MD5(Wireshark-win32-1.99.8.exe)=32c384b95fa5e90796ee0f88bb235829 SHA1(Wireshark-win32-1.99.8.exe)=eab5dda8fe74ab538c82c372d2958076b0f57fba RIPEMD160(Wireshark-win32-1.99.8.exe)=06d7a9b0d720d74a5b18a5250ae2c4727abff3d7 Wireshark-win64-1.99.8.exe: 46042800 bytes MD5(Wireshark-win64-1.99.8.exe)=1f26ba5d7b607e42a476bdcff50fa2a1 SHA1(Wireshark-win64-1.99.8.exe)=be2aaffeb71189e51b6d84ff5e9a8fa4f506db42 RIPEMD160(Wireshark-win64-1.99.8.exe)=25efb3267320e357d8fef790cca388d4088433dd WiresharkPortable_1.99.8.paf.exe: 40928600 bytes MD5(WiresharkPortable_1.99.8.paf.exe)=0d97a72670b0787cd2187470a825807e SHA1(WiresharkPortable_1.99.8.paf.exe)=ecbaaee791caa4a89807df4ed8f5f4cf2e17d508 RIPEMD160(WiresharkPortable_1.99.8.paf.exe)=f206135f3a6c52af36313de13bfed6918263208e Wireshark 1.99.8 Intel 32.dmg: 28132560 bytes MD5(Wireshark 1.99.8 Intel 32.dmg)=4ea84e1e3112f0c65b6c90ee7a8647a5 SHA1(Wireshark 1.99.8 Intel 32.dmg)=7f42060d8662dc6be51b72a8f0f908199b1f4d1d RIPEMD160(Wireshark 1.99.8 Intel 32.dmg)=5b0aa4f03a35d5e3165b92b980122c8fde3d44e0 Wireshark 1.99.8 Intel 64.dmg: 35749290 bytes MD5(Wireshark 1.99.8 Intel 64.dmg)=868d2f9331588c3cab42de5c50f3943d SHA1(Wireshark 1.99.8 Intel 64.dmg)=1fb51854dc02175aa8b8c0d29640186015367c40 RIPEMD160(Wireshark 1.99.8 Intel 64.dmg)=0a970f6e6ca224f29f54fea3bf5caa5927b6c1c6 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlWyiuIACgkQpw8IXSHylJoNygCdG7NhKUp+H51YGkUCtrNwmLdq txMAn3gtCBSlZKnQgOfxr6rPX2uINRxO =hQp6 -----END PGP SIGNATURE-----
- Prev by Date: Re: [Wireshark-dev] Npcap 0.01 call for test (2nd)
- Next by Date: [Wireshark-dev] We now have an EV code signing certificate!
- Previous by thread: Re: [Wireshark-dev] Windows petri-dish unhappy
- Next by thread: [Wireshark-dev] We now have an EV code signing certificate!