Huge thanks to our Platinum Members Endace and LiveAction,
and our Silver Member Veeam, for supporting the Wireshark Foundation and project.

Wireshark-dev: [Wireshark-dev] Installing on Ubuntu 12.04.5

From: Tracy Hockenhull <Tracy@xxxxxxxxxxxxxxxxxx>
Date: Wed, 22 Oct 2014 22:43:53 -0500
I'm fairly new to Linux, and new to Wireshark, and I'm having problems with the ./configure part of the process to install Wireshark.

The error I'm getting is this:

checking for GTK+ - version >= 3.0.0... no
*** Could not run GTK+ test program, checking why...
*** The test program failed to compile or link. See the file config.log for the *** exact error that occured. This usually means GTK+ is incorrectly installed.
configure: error: GTK+ 3 is not available

To fix this, I tried sudo apt-get install gtk+3.0, which installed gtk+3.0, but I still get the error above when I try ./configure.

I have attached the config.log.

Thanks,

Tracy
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by wireshark configure 1.12.1, which was
generated by GNU Autoconf 2.69.  Invocation command line was

  $ ./configure 

## --------- ##
## Platform. ##
## --------- ##

hostname = Inspiron-1545
uname -m = x86_64
uname -r = 3.2.0-70-generic
uname -s = Linux
uname -v = #105-Ubuntu SMP Wed Sep 24 19:49:16 UTC 2014

/usr/bin/uname -p = unknown
/bin/uname -X     = unknown

/bin/arch              = unknown
/usr/bin/arch -k       = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo      = unknown
/bin/machine           = unknown
/usr/bin/oslevel       = unknown
/bin/universe          = unknown

PATH: /usr/lib/lightdm/lightdm
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games


## ----------- ##
## Core tests. ##
## ----------- ##

configure:2818: checking build system type
configure:2832: result: x86_64-unknown-linux-gnu
configure:2852: checking host system type
configure:2865: result: x86_64-unknown-linux-gnu
configure:2885: checking target system type
configure:2898: result: x86_64-unknown-linux-gnu
configure:2941: checking for a BSD-compatible install
configure:3009: result: /usr/bin/install -c
configure:3020: checking whether build environment is sane
configure:3075: result: yes
configure:3226: checking for a thread-safe mkdir -p
configure:3265: result: /bin/mkdir -p
configure:3272: checking for gawk
configure:3302: result: no
configure:3272: checking for mawk
configure:3288: found /usr/bin/mawk
configure:3299: result: mawk
configure:3310: checking whether make sets $(MAKE)
configure:3332: result: yes
configure:3361: checking whether make supports nested variables
configure:3378: result: yes
configure:3467: checking whether UID '1000' is supported by ustar format
configure:3470: result: yes
configure:3477: checking whether GID '1000' is supported by ustar format
configure:3480: result: yes
configure:3488: checking how to create a ustar tar archive
configure:3499: tar --version
tar (GNU tar) 1.26
Copyright (C) 2011 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

Written by John Gilmore and Jay Fenlason.
configure:3502: $? = 0
configure:3542: tardir=conftest.dir && eval tar --format=ustar -chf - "$tardir" >conftest.tar
configure:3545: $? = 0
configure:3549: tar -xf - <conftest.tar
configure:3552: $? = 0
configure:3554: cat conftest.dir/file
GrepMe
configure:3557: $? = 0
configure:3570: result: gnutar
configure:3714: checking for gcc
configure:3730: found /usr/bin/gcc
configure:3741: result: gcc
configure:3970: checking for C compiler version
configure:3979: gcc --version >&5
gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:3990: $? = 0
configure:3979: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.6/lto-wrapper
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.6.3-1ubuntu5' --with-bugurl=file:///usr/share/doc/gcc-4.6/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.6 --enable-shared --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.6 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --enable-objc-gc --disable-werror --with-arch-32=i686 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) 
configure:3990: $? = 0
configure:3979: gcc -V >&5
gcc: error: unrecognized option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3990: $? = 4
configure:3979: gcc -qversion >&5
gcc: error: unrecognized option '-qversion'
gcc: fatal error: no input files
compilation terminated.
configure:3990: $? = 4
configure:4010: checking whether the C compiler works
configure:4032: gcc    conftest.c  >&5
configure:4036: $? = 0
configure:4084: result: yes
configure:4087: checking for C compiler default output file name
configure:4089: result: a.out
configure:4095: checking for suffix of executables
configure:4102: gcc -o conftest    conftest.c  >&5
configure:4106: $? = 0
configure:4128: result: 
configure:4150: checking whether we are cross compiling
configure:4158: gcc -o conftest    conftest.c  >&5
configure:4162: $? = 0
configure:4169: ./conftest
configure:4173: $? = 0
configure:4188: result: no
configure:4193: checking for suffix of object files
configure:4215: gcc -c   conftest.c >&5
configure:4219: $? = 0
configure:4240: result: o
configure:4244: checking whether we are using the GNU C compiler
configure:4263: gcc -c   conftest.c >&5
configure:4263: $? = 0
configure:4272: result: yes
configure:4281: checking whether gcc accepts -g
configure:4301: gcc -c -g  conftest.c >&5
configure:4301: $? = 0
configure:4342: result: yes
configure:4359: checking for gcc option to accept ISO C89
configure:4422: gcc  -c -g -O2  conftest.c >&5
configure:4422: $? = 0
configure:4435: result: none needed
configure:4460: checking whether gcc understands -c and -o together
configure:4482: gcc -c conftest.c -o conftest2.o
configure:4485: $? = 0
configure:4482: gcc -c conftest.c -o conftest2.o
configure:4485: $? = 0
configure:4497: result: yes
configure:4525: checking for style of include used by make
configure:4553: result: GNU
configure:4579: checking dependency style of gcc
configure:4690: result: gcc3
configure:4764: checking for g++
configure:4780: found /usr/bin/g++
configure:4791: result: g++
configure:4818: checking for C++ compiler version
configure:4827: g++ --version >&5
g++ (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:4838: $? = 0
configure:4827: g++ -v >&5
Using built-in specs.
COLLECT_GCC=g++
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.6/lto-wrapper
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.6.3-1ubuntu5' --with-bugurl=file:///usr/share/doc/gcc-4.6/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.6 --enable-shared --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.6 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --enable-objc-gc --disable-werror --with-arch-32=i686 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) 
configure:4838: $? = 0
configure:4827: g++ -V >&5
g++: error: unrecognized option '-V'
g++: fatal error: no input files
compilation terminated.
configure:4838: $? = 4
configure:4827: g++ -qversion >&5
g++: error: unrecognized option '-qversion'
g++: fatal error: no input files
compilation terminated.
configure:4838: $? = 4
configure:4842: checking whether we are using the GNU C++ compiler
configure:4861: g++ -c   conftest.cpp >&5
configure:4861: $? = 0
configure:4870: result: yes
configure:4879: checking whether g++ accepts -g
configure:4899: g++ -c -g  conftest.cpp >&5
configure:4899: $? = 0
configure:4940: result: yes
configure:4965: checking dependency style of g++
configure:5076: result: gcc3
configure:5096: checking how to run the C preprocessor
configure:5127: gcc -E  conftest.c
configure:5127: $? = 0
configure:5141: gcc -E  conftest.c
conftest.c:14:28: fatal error: ac_nonexistent.h: No such file or directory
compilation terminated.
configure:5141: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.12.1"
| #define PACKAGE_STRING "wireshark 1.12.1"
| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/";
| #define PACKAGE_URL "http://www.wireshark.org/";
| #define PACKAGE "wireshark"
| #define VERSION "1.12.1"
| #define VERSION_MAJOR 1
| #define VERSION_MINOR 12
| #define VERSION_MICRO 1
| /* end confdefs.h.  */
| #include <ac_nonexistent.h>
configure:5166: result: gcc -E
configure:5186: gcc -E  conftest.c
configure:5186: $? = 0
configure:5200: gcc -E  conftest.c
conftest.c:14:28: fatal error: ac_nonexistent.h: No such file or directory
compilation terminated.
configure:5200: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.12.1"
| #define PACKAGE_STRING "wireshark 1.12.1"
| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/";
| #define PACKAGE_URL "http://www.wireshark.org/";
| #define PACKAGE "wireshark"
| #define VERSION "1.12.1"
| #define VERSION_MAJOR 1
| #define VERSION_MINOR 12
| #define VERSION_MICRO 1
| /* end confdefs.h.  */
| #include <ac_nonexistent.h>
configure:5233: checking if gcc is Clang
configure:5244: gcc -c -g -O2  conftest.c >&5
conftest.c:17:1: error: unknown type name 'CC'
conftest.c:17:7: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'not'
conftest.c:17:7: error: unknown type name 'not'
configure:5244: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.12.1"
| #define PACKAGE_STRING "wireshark 1.12.1"
| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/";
| #define PACKAGE_URL "http://www.wireshark.org/";
| #define PACKAGE "wireshark"
| #define VERSION "1.12.1"
| #define VERSION_MAJOR 1
| #define VERSION_MINOR 12
| #define VERSION_MICRO 1
| /* end confdefs.h.  */
| 
| 
| #ifndef __clang__
| CC is not __clang__
| #endif
| 
configure:5254: result: no
configure:5257: checking if g++ is Clang
configure:5274: g++ -c -g -O2  conftest.cpp >&5
conftest.cpp:17:1: error: 'CXX' does not name a type
configure:5274: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.12.1"
| #define PACKAGE_STRING "wireshark 1.12.1"
| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/";
| #define PACKAGE_URL "http://www.wireshark.org/";
| #define PACKAGE "wireshark"
| #define VERSION "1.12.1"
| #define VERSION_MAJOR 1
| #define VERSION_MINOR 12
| #define VERSION_MICRO 1
| /* end confdefs.h.  */
| 
| 
| #ifndef __clang__
| CXX is not __clang__
| #endif
| 
configure:5290: result: no
configure:5346: checking how to print strings
configure:5373: result: printf
configure:5394: checking for a sed that does not truncate output
configure:5458: result: /bin/sed
configure:5476: checking for grep that handles long lines and -e
configure:5534: result: /bin/grep
configure:5539: checking for egrep
configure:5601: result: /bin/grep -E
configure:5606: checking for fgrep
configure:5668: result: /bin/grep -F
configure:5703: checking for ld used by gcc
configure:5770: result: /usr/bin/ld
configure:5777: checking if the linker (/usr/bin/ld) is GNU ld
configure:5792: result: yes
configure:5804: checking for BSD- or MS-compatible name lister (nm)
configure:5853: result: /usr/bin/nm -B
configure:5983: checking the name lister (/usr/bin/nm -B) interface
configure:5990: gcc -c -g -O2  conftest.c >&5
configure:5993: /usr/bin/nm -B "conftest.o"
configure:5996: output
0000000000000000 B some_variable
configure:6003: result: BSD nm
configure:6006: checking whether ln -s works
configure:6010: result: yes
configure:6018: checking the maximum length of command line arguments
configure:6149: result: 1572864
configure:6166: checking whether the shell understands some XSI constructs
configure:6176: result: yes
configure:6180: checking whether the shell understands "+="
configure:6186: result: yes
configure:6221: checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format
configure:6261: result: func_convert_file_noop
configure:6268: checking how to convert x86_64-unknown-linux-gnu file names to toolchain format
configure:6288: result: func_convert_file_noop
configure:6295: checking for /usr/bin/ld option to reload object files
configure:6302: result: -r
configure:6376: checking for objdump
configure:6392: found /usr/bin/objdump
configure:6403: result: objdump
configure:6435: checking how to recognize dependent libraries
configure:6633: result: pass_all
configure:6718: checking for dlltool
configure:6748: result: no
configure:6778: checking how to associate runtime and link libraries
configure:6805: result: printf %s\n
configure:6865: checking for ar
configure:6881: found /usr/bin/ar
configure:6892: result: ar
configure:6929: checking for archiver @FILE support
configure:6946: gcc -c -g -O2  conftest.c >&5
configure:6946: $? = 0
configure:6949: ar cru libconftest.a @conftest.lst >&5
configure:6952: $? = 0
configure:6957: ar cru libconftest.a @conftest.lst >&5
ar: conftest.o: No such file or directory
configure:6960: $? = 1
configure:6972: result: @
configure:7030: checking for strip
configure:7046: found /usr/bin/strip
configure:7057: result: strip
configure:7129: checking for ranlib
configure:7145: found /usr/bin/ranlib
configure:7156: result: ranlib
configure:7258: checking command to parse /usr/bin/nm -B output from gcc object
configure:7378: gcc -c -g -O2  conftest.c >&5
configure:7381: $? = 0
configure:7385: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | sed '/ __gnu_lto/d' \> conftest.nm
configure:7388: $? = 0
configure:7454: gcc -o conftest -g -O2   conftest.c conftstm.o >&5
configure:7457: $? = 0
configure:7495: result: ok
configure:7532: checking for sysroot
configure:7562: result: no
configure:7639: gcc -c -g -O2  conftest.c >&5
configure:7642: $? = 0
configure:7831: checking for mt
configure:7847: found /bin/mt
configure:7858: result: mt
configure:7881: checking if mt is a manifest tool
configure:7887: mt '-?'
configure:7895: result: no
configure:8533: checking for ANSI C header files
configure:8553: gcc -c -g -O2  conftest.c >&5
configure:8553: $? = 0
configure:8626: gcc -o conftest -g -O2   conftest.c  >&5
configure:8626: $? = 0
configure:8626: ./conftest
configure:8626: $? = 0
configure:8637: result: yes
configure:8650: checking for sys/types.h
configure:8650: gcc -c -g -O2  conftest.c >&5
configure:8650: $? = 0
configure:8650: result: yes
configure:8650: checking for sys/stat.h
configure:8650: gcc -c -g -O2  conftest.c >&5
configure:8650: $? = 0
configure:8650: result: yes
configure:8650: checking for stdlib.h
configure:8650: gcc -c -g -O2  conftest.c >&5
configure:8650: $? = 0
configure:8650: result: yes
configure:8650: checking for string.h
configure:8650: gcc -c -g -O2  conftest.c >&5
configure:8650: $? = 0
configure:8650: result: yes
configure:8650: checking for memory.h
configure:8650: gcc -c -g -O2  conftest.c >&5
configure:8650: $? = 0
configure:8650: result: yes
configure:8650: checking for strings.h
configure:8650: gcc -c -g -O2  conftest.c >&5
configure:8650: $? = 0
configure:8650: result: yes
configure:8650: checking for inttypes.h
configure:8650: gcc -c -g -O2  conftest.c >&5
configure:8650: $? = 0
configure:8650: result: yes
configure:8650: checking for stdint.h
configure:8650: gcc -c -g -O2  conftest.c >&5
configure:8650: $? = 0
configure:8650: result: yes
configure:8650: checking for unistd.h
configure:8650: gcc -c -g -O2  conftest.c >&5
configure:8650: $? = 0
configure:8650: result: yes
configure:8664: checking for dlfcn.h
configure:8664: gcc -c -g -O2  conftest.c >&5
configure:8664: $? = 0
configure:8664: result: yes
configure:8848: checking for objdir
configure:8863: result: .libs
configure:9130: checking if gcc supports -fno-rtti -fno-exceptions
configure:9148: gcc -c -g -O2  -fno-rtti -fno-exceptions conftest.c >&5
cc1: warning: command line option '-fno-rtti' is valid for C++/ObjC++ but not for C [enabled by default]
configure:9152: $? = 0
configure:9165: result: no
configure:9492: checking for gcc option to produce PIC
configure:9499: result: -fPIC -DPIC
configure:9507: checking if gcc PIC flag -fPIC -DPIC works
configure:9525: gcc -c -g -O2  -fPIC -DPIC -DPIC conftest.c >&5
configure:9529: $? = 0
configure:9542: result: yes
configure:9571: checking if gcc static flag -static works
configure:9599: result: yes
configure:9614: checking if gcc supports -c -o file.o
configure:9635: gcc -c -g -O2  -o out/conftest2.o conftest.c >&5
configure:9639: $? = 0
configure:9661: result: yes
configure:9669: checking if gcc supports -c -o file.o
configure:9716: result: yes
configure:9749: checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries
configure:10906: result: yes
configure:10943: checking whether -lc should be explicitly linked in
configure:10951: gcc -c -g -O2  conftest.c >&5
configure:10954: $? = 0
configure:10969: gcc -shared  -fPIC -DPIC conftest.o  -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| /bin/grep  -lc  \>/dev/null 2\>\&1
configure:10972: $? = 0
configure:10986: result: no
configure:11146: checking dynamic linker characteristics
configure:11646: gcc -o conftest -g -O2   -Wl,-rpath -Wl,/foo conftest.c  >&5
configure:11646: $? = 0
configure:11880: result: GNU/Linux ld.so
configure:11987: checking how to hardcode library paths into programs
configure:12012: result: immediate
configure:12106: checking for shl_load
configure:12106: gcc -o conftest -g -O2   conftest.c  >&5
/tmp/ccTod4Uz.o: In function `main':
/home/tracy/Downloads/wireshark/wireshark-1.12.1/conftest.c:60: undefined reference to `shl_load'
collect2: ld returned 1 exit status
configure:12106: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.12.1"
| #define PACKAGE_STRING "wireshark 1.12.1"
| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/";
| #define PACKAGE_URL "http://www.wireshark.org/";
| #define PACKAGE "wireshark"
| #define VERSION "1.12.1"
| #define VERSION_MAJOR 1
| #define VERSION_MINOR 12
| #define VERSION_MICRO 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| /* end confdefs.h.  */
| /* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
|    For example, HP-UX 11i <limits.h> declares gettimeofday.  */
| #define shl_load innocuous_shl_load
| 
| /* System header to define __stub macros and hopefully few prototypes,
|     which can conflict with char shl_load (); below.
|     Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
|     <limits.h> exists even on freestanding compilers.  */
| 
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| 
| #undef shl_load
| 
| /* Override any GCC internal prototype to avoid an error.
|    Use char because int might match the return type of a GCC
|    builtin and then its argument prototype would still apply.  */
| #ifdef __cplusplus
| extern "C"
| #endif
| char shl_load ();
| /* The GNU C library defines this for functions which it implements
|     to always fail with ENOSYS.  Some functions are actually named
|     something starting with __ and the normal name is an alias.  */
| #if defined __stub_shl_load || defined __stub___shl_load
| choke me
| #endif
| 
| int
| main ()
| {
| return shl_load ();
|   ;
|   return 0;
| }
configure:12106: result: no
configure:12110: checking for shl_load in -ldld
configure:12135: gcc -o conftest -g -O2   conftest.c -ldld   >&5
/usr/bin/ld: cannot find -ldld
collect2: ld returned 1 exit status
configure:12135: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.12.1"
| #define PACKAGE_STRING "wireshark 1.12.1"
| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/";
| #define PACKAGE_URL "http://www.wireshark.org/";
| #define PACKAGE "wireshark"
| #define VERSION "1.12.1"
| #define VERSION_MAJOR 1
| #define VERSION_MINOR 12
| #define VERSION_MICRO 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| /* end confdefs.h.  */
| 
| /* Override any GCC internal prototype to avoid an error.
|    Use char because int might match the return type of a GCC
|    builtin and then its argument prototype would still apply.  */
| #ifdef __cplusplus
| extern "C"
| #endif
| char shl_load ();
| int
| main ()
| {
| return shl_load ();
|   ;
|   return 0;
| }
configure:12144: result: no
configure:12149: checking for dlopen
configure:12149: gcc -o conftest -g -O2   conftest.c  >&5
/tmp/ccFX188L.o: In function `main':
/home/tracy/Downloads/wireshark/wireshark-1.12.1/conftest.c:60: undefined reference to `dlopen'
collect2: ld returned 1 exit status
configure:12149: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.12.1"
| #define PACKAGE_STRING "wireshark 1.12.1"
| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/";
| #define PACKAGE_URL "http://www.wireshark.org/";
| #define PACKAGE "wireshark"
| #define VERSION "1.12.1"
| #define VERSION_MAJOR 1
| #define VERSION_MINOR 12
| #define VERSION_MICRO 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| /* end confdefs.h.  */
| /* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
|    For example, HP-UX 11i <limits.h> declares gettimeofday.  */
| #define dlopen innocuous_dlopen
| 
| /* System header to define __stub macros and hopefully few prototypes,
|     which can conflict with char dlopen (); below.
|     Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
|     <limits.h> exists even on freestanding compilers.  */
| 
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| 
| #undef dlopen
| 
| /* Override any GCC internal prototype to avoid an error.
|    Use char because int might match the return type of a GCC
|    builtin and then its argument prototype would still apply.  */
| #ifdef __cplusplus
| extern "C"
| #endif
| char dlopen ();
| /* The GNU C library defines this for functions which it implements
|     to always fail with ENOSYS.  Some functions are actually named
|     something starting with __ and the normal name is an alias.  */
| #if defined __stub_dlopen || defined __stub___dlopen
| choke me
| #endif
| 
| int
| main ()
| {
| return dlopen ();
|   ;
|   return 0;
| }
configure:12149: result: no
configure:12153: checking for dlopen in -ldl
configure:12178: gcc -o conftest -g -O2   conftest.c -ldl   >&5
configure:12178: $? = 0
configure:12187: result: yes
configure:12306: checking whether a program can dlopen itself
configure:12386: gcc -o conftest -g -O2  -DHAVE_DLFCN_H  -Wl,--export-dynamic conftest.c -ldl  >&5
configure:12389: $? = 0
configure:12407: result: yes
configure:12412: checking whether a statically linked program can dlopen itself
configure:12492: gcc -o conftest -g -O2  -DHAVE_DLFCN_H  -Wl,--export-dynamic -static conftest.c -ldl  >&5
/tmp/ccjeKwDX.o: In function `main':
/home/tracy/Downloads/wireshark/wireshark-1.12.1/configure:12471: warning: Using 'dlopen' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/bin/ld: dynamic STT_GNU_IFUNC symbol `strcmp' with pointer equality in `/usr/lib/gcc/x86_64-linux-gnu/4.6/../../../x86_64-linux-gnu/libc.a(strcmp.o)' can not be used when making an executable; recompile with -fPIE and relink with -pie
collect2: ld returned 1 exit status
configure:12495: $? = 1
configure:12513: result: no
configure:12552: checking whether stripping libraries is possible
configure:12557: result: yes
configure:12592: checking if libtool supports shared libraries
configure:12594: result: yes
configure:12597: checking whether to build shared libraries
configure:12618: result: yes
configure:12621: checking whether to build static libraries
configure:12625: result: no
configure:12648: checking how to run the C++ preprocessor
configure:12675: g++ -E  conftest.cpp
configure:12675: $? = 0
configure:12689: g++ -E  conftest.cpp
conftest.cpp:26:28: fatal error: ac_nonexistent.h: No such file or directory
compilation terminated.
configure:12689: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.12.1"
| #define PACKAGE_STRING "wireshark 1.12.1"
| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/";
| #define PACKAGE_URL "http://www.wireshark.org/";
| #define PACKAGE "wireshark"
| #define VERSION "1.12.1"
| #define VERSION_MAJOR 1
| #define VERSION_MINOR 12
| #define VERSION_MICRO 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| /* end confdefs.h.  */
| #include <ac_nonexistent.h>
configure:12714: result: g++ -E
configure:12734: g++ -E  conftest.cpp
configure:12734: $? = 0
configure:12748: g++ -E  conftest.cpp
conftest.cpp:26:28: fatal error: ac_nonexistent.h: No such file or directory
compilation terminated.
configure:12748: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.12.1"
| #define PACKAGE_STRING "wireshark 1.12.1"
| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/";
| #define PACKAGE_URL "http://www.wireshark.org/";
| #define PACKAGE "wireshark"
| #define VERSION "1.12.1"
| #define VERSION_MAJOR 1
| #define VERSION_MINOR 12
| #define VERSION_MICRO 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| /* end confdefs.h.  */
| #include <ac_nonexistent.h>
configure:12917: checking for ld used by g++
configure:12984: result: /usr/bin/ld -m elf_x86_64
configure:12991: checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld
configure:13006: result: yes
configure:13061: checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries
configure:14063: result: yes
configure:14099: g++ -c -g -O2  conftest.cpp >&5
configure:14102: $? = 0
configure:14622: checking for g++ option to produce PIC
configure:14629: result: -fPIC -DPIC
configure:14637: checking if g++ PIC flag -fPIC -DPIC works
configure:14655: g++ -c -g -O2  -fPIC -DPIC -DPIC conftest.cpp >&5
configure:14659: $? = 0
configure:14672: result: yes
configure:14695: checking if g++ static flag -static works
configure:14723: result: yes
configure:14735: checking if g++ supports -c -o file.o
configure:14756: g++ -c -g -O2  -o out/conftest2.o conftest.cpp >&5
configure:14760: $? = 0
configure:14782: result: yes
configure:14787: checking if g++ supports -c -o file.o
configure:14834: result: yes
configure:14864: checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries
configure:14903: result: yes
configure:15044: checking dynamic linker characteristics
configure:15712: result: GNU/Linux ld.so
configure:15765: checking how to hardcode library paths into programs
configure:15790: result: immediate
configure:15870: checking whether g++ is a C++ compiler
configure:15894: g++ -o conftest -g -O2   conftest.cpp  >&5
configure:15894: $? = 0
configure:15895: result: yes
configure:15915: checking for perl
configure:15933: found /usr/bin/perl
configure:15945: result: /usr/bin/perl
configure:15957: checking for python
configure:15975: found /usr/bin/python
configure:15987: result: /usr/bin/python
configure:16002: checking whether /usr/bin/python is Python 2.5 or later
configure:16012: result: yes
configure:16040: checking for bison
configure:16056: found /usr/bin/bison
configure:16067: result: bison -y
configure:16081: checking for bison
configure:16099: found /usr/bin/bison
configure:16111: result: /usr/bin/bison
configure:16127: checking for flex
configure:16143: found /usr/bin/flex
configure:16154: result: flex
configure:16192: flex conftest.l
configure:16196: $? = 0
configure:16198: checking lex output file root
configure:16212: result: lex.yy
configure:16217: checking lex library
configure:16231: gcc -o conftest -g -O2   conftest.c   >&5
/tmp/cc3CSx3C.o: In function `input':
/home/tracy/Downloads/wireshark/wireshark-1.12.1/lex.yy.c:1183: undefined reference to `yywrap'
/tmp/cc3CSx3C.o: In function `yylex':
/home/tracy/Downloads/wireshark/wireshark-1.12.1/lex.yy.c:882: undefined reference to `yywrap'
/tmp/cc3CSx3C.o: In function `main':
/home/tracy/Downloads/wireshark/wireshark-1.12.1/conftest.l:18: undefined reference to `yywrap'
collect2: ld returned 1 exit status
configure:16231: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.12.1"
| #define PACKAGE_STRING "wireshark 1.12.1"
| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/";
| #define PACKAGE_URL "http://www.wireshark.org/";
| #define PACKAGE "wireshark"
| #define VERSION "1.12.1"
| #define VERSION_MAJOR 1
| #define VERSION_MINOR 12
| #define VERSION_MICRO 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| /* end confdefs.h.  */
| 
| #line 3 "lex.yy.c"
| 
| #define  YY_INT_ALIGNED short int
| 
| /* A lexical scanner generated by flex */
| 
| #define FLEX_SCANNER
| #define YY_FLEX_MAJOR_VERSION 2
| #define YY_FLEX_MINOR_VERSION 5
| #define YY_FLEX_SUBMINOR_VERSION 35
| #if YY_FLEX_SUBMINOR_VERSION > 0
| #define FLEX_BETA
| #endif
| 
| /* First, we deal with  platform-specific or compiler-specific issues. */
| 
| /* begin standard C headers. */
| #include <stdio.h>
| #include <string.h>
| #include <errno.h>
| #include <stdlib.h>
| 
| /* end standard C headers. */
| 
| /* flex integer type definitions */
| 
| #ifndef FLEXINT_H
| #define FLEXINT_H
| 
| /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
| 
| #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
| 
| /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
|  * if you want the limit (max/min) macros for int types. 
|  */
| #ifndef __STDC_LIMIT_MACROS
| #define __STDC_LIMIT_MACROS 1
| #endif
| 
| #include <inttypes.h>
| typedef int8_t flex_int8_t;
| typedef uint8_t flex_uint8_t;
| typedef int16_t flex_int16_t;
| typedef uint16_t flex_uint16_t;
| typedef int32_t flex_int32_t;
| typedef uint32_t flex_uint32_t;
| #else
| typedef signed char flex_int8_t;
| typedef short int flex_int16_t;
| typedef int flex_int32_t;
| typedef unsigned char flex_uint8_t; 
| typedef unsigned short int flex_uint16_t;
| typedef unsigned int flex_uint32_t;
| 
| /* Limits of integral types. */
| #ifndef INT8_MIN
| #define INT8_MIN               (-128)
| #endif
| #ifndef INT16_MIN
| #define INT16_MIN              (-32767-1)
| #endif
| #ifndef INT32_MIN
| #define INT32_MIN              (-2147483647-1)
| #endif
| #ifndef INT8_MAX
| #define INT8_MAX               (127)
| #endif
| #ifndef INT16_MAX
| #define INT16_MAX              (32767)
| #endif
| #ifndef INT32_MAX
| #define INT32_MAX              (2147483647)
| #endif
| #ifndef UINT8_MAX
| #define UINT8_MAX              (255U)
| #endif
| #ifndef UINT16_MAX
| #define UINT16_MAX             (65535U)
| #endif
| #ifndef UINT32_MAX
| #define UINT32_MAX             (4294967295U)
| #endif
| 
| #endif /* ! C99 */
| 
| #endif /* ! FLEXINT_H */
| 
| #ifdef __cplusplus
| 
| /* The "const" storage-class-modifier is valid. */
| #define YY_USE_CONST
| 
| #else	/* ! __cplusplus */
| 
| /* C99 requires __STDC__ to be defined as 1. */
| #if defined (__STDC__)
| 
| #define YY_USE_CONST
| 
| #endif	/* defined (__STDC__) */
| #endif	/* ! __cplusplus */
| 
| #ifdef YY_USE_CONST
| #define yyconst const
| #else
| #define yyconst
| #endif
| 
| /* Returned upon end-of-file. */
| #define YY_NULL 0
| 
| /* Promotes a possibly negative, possibly signed char to an unsigned
|  * integer for use as an array index.  If the signed char is negative,
|  * we want to instead treat it as an 8-bit unsigned char, hence the
|  * double cast.
|  */
| #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
| 
| /* Enter a start condition.  This macro really ought to take a parameter,
|  * but we do it the disgusting crufty way forced on us by the ()-less
|  * definition of BEGIN.
|  */
| #define BEGIN (yy_start) = 1 + 2 *
| 
| /* Translate the current start state into a value that can be later handed
|  * to BEGIN to return to the state.  The YYSTATE alias is for lex
|  * compatibility.
|  */
| #define YY_START (((yy_start) - 1) / 2)
| #define YYSTATE YY_START
| 
| /* Action number for EOF rule of a given start state. */
| #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
| 
| /* Special action meaning "start processing a new file". */
| #define YY_NEW_FILE yyrestart(yyin  )
| 
| #define YY_END_OF_BUFFER_CHAR 0
| 
| /* Size of default input buffer. */
| #ifndef YY_BUF_SIZE
| #ifdef __ia64__
| /* On IA-64, the buffer size is 16k, not 8k.
|  * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case.
|  * Ditto for the __ia64__ case accordingly.
|  */
| #define YY_BUF_SIZE 32768
| #else
| #define YY_BUF_SIZE 16384
| #endif /* __ia64__ */
| #endif
| 
| /* The state buf must be large enough to hold one state per character in the main buffer.
|  */
| #define YY_STATE_BUF_SIZE   ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
| 
| #ifndef YY_TYPEDEF_YY_BUFFER_STATE
| #define YY_TYPEDEF_YY_BUFFER_STATE
| typedef struct yy_buffer_state *YY_BUFFER_STATE;
| #endif
| 
| extern int yyleng;
| 
| extern FILE *yyin, *yyout;
| 
| #define EOB_ACT_CONTINUE_SCAN 0
| #define EOB_ACT_END_OF_FILE 1
| #define EOB_ACT_LAST_MATCH 2
| 
|     #define YY_LESS_LINENO(n)
|     
| /* Return all but the first "n" matched characters back to the input stream. */
| #define yyless(n) \
| 	do \
| 		{ \
| 		/* Undo effects of setting up yytext. */ \
|         int yyless_macro_arg = (n); \
|         YY_LESS_LINENO(yyless_macro_arg);\
| 		*yy_cp = (yy_hold_char); \
| 		YY_RESTORE_YY_MORE_OFFSET \
| 		(yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
| 		YY_DO_BEFORE_ACTION; /* set up yytext again */ \
| 		} \
| 	while ( 0 )
| 
| #define unput(c) yyunput( c, (yytext_ptr)  )
| 
| #ifndef YY_TYPEDEF_YY_SIZE_T
| #define YY_TYPEDEF_YY_SIZE_T
| typedef size_t yy_size_t;
| #endif
| 
| #ifndef YY_STRUCT_YY_BUFFER_STATE
| #define YY_STRUCT_YY_BUFFER_STATE
| struct yy_buffer_state
| 	{
| 	FILE *yy_input_file;
| 
| 	char *yy_ch_buf;		/* input buffer */
| 	char *yy_buf_pos;		/* current position in input buffer */
| 
| 	/* Size of input buffer in bytes, not including room for EOB
| 	 * characters.
| 	 */
| 	yy_size_t yy_buf_size;
| 
| 	/* Number of characters read into yy_ch_buf, not including EOB
| 	 * characters.
| 	 */
| 	int yy_n_chars;
| 
| 	/* Whether we "own" the buffer - i.e., we know we created it,
| 	 * and can realloc() it to grow it, and should free() it to
| 	 * delete it.
| 	 */
| 	int yy_is_our_buffer;
| 
| 	/* Whether this is an "interactive" input source; if so, and
| 	 * if we're using stdio for input, then we want to use getc()
| 	 * instead of fread(), to make sure we stop fetching input after
| 	 * each newline.
| 	 */
| 	int yy_is_interactive;
| 
| 	/* Whether we're considered to be at the beginning of a line.
| 	 * If so, '^' rules will be active on the next match, otherwise
| 	 * not.
| 	 */
| 	int yy_at_bol;
| 
|     int yy_bs_lineno; /**< The line count. */
|     int yy_bs_column; /**< The column count. */
|     
| 	/* Whether to try to fill the input buffer when we reach the
| 	 * end of it.
| 	 */
| 	int yy_fill_buffer;
| 
| 	int yy_buffer_status;
| 
| #define YY_BUFFER_NEW 0
| #define YY_BUFFER_NORMAL 1
| 	/* When an EOF's been seen but there's still some text to process
| 	 * then we mark the buffer as YY_EOF_PENDING, to indicate that we
| 	 * shouldn't try reading from the input source any more.  We might
| 	 * still have a bunch of tokens to match, though, because of
| 	 * possible backing-up.
| 	 *
| 	 * When we actually see the EOF, we change the status to "new"
| 	 * (via yyrestart()), so that the user can continue scanning by
| 	 * just pointing yyin at a new input file.
| 	 */
| #define YY_BUFFER_EOF_PENDING 2
| 
| 	};
| #endif /* !YY_STRUCT_YY_BUFFER_STATE */
| 
| /* Stack of input buffers. */
| static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
| static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
| static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
| 
| /* We provide macros for accessing buffer states in case in the
|  * future we want to put the buffer states in a more general
|  * "scanner state".
|  *
|  * Returns the top of the stack, or NULL.
|  */
| #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
|                           ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
|                           : NULL)
| 
| /* Same as previous macro, but useful when we know that the buffer stack is not
|  * NULL or when we need an lvalue. For internal use only.
|  */
| #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
| 
| /* yy_hold_char holds the character lost when yytext is formed. */
| static char yy_hold_char;
| static int yy_n_chars;		/* number of characters read into yy_ch_buf */
| int yyleng;
| 
| /* Points to current character in buffer. */
| static char *yy_c_buf_p = (char *) 0;
| static int yy_init = 0;		/* whether we need to initialize */
| static int yy_start = 0;	/* start state number */
| 
| /* Flag which is used to allow yywrap()'s to do buffer switches
|  * instead of setting up a fresh yyin.  A bit of a hack ...
|  */
| static int yy_did_buffer_switch_on_eof;
| 
| void yyrestart (FILE *input_file  );
| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer  );
| YY_BUFFER_STATE yy_create_buffer (FILE *file,int size  );
| void yy_delete_buffer (YY_BUFFER_STATE b  );
| void yy_flush_buffer (YY_BUFFER_STATE b  );
| void yypush_buffer_state (YY_BUFFER_STATE new_buffer  );
| void yypop_buffer_state (void );
| 
| static void yyensure_buffer_stack (void );
| static void yy_load_buffer_state (void );
| static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file  );
| 
| #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
| 
| YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size  );
| YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str  );
| YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len  );
| 
| void *yyalloc (yy_size_t  );
| void *yyrealloc (void *,yy_size_t  );
| void yyfree (void *  );
| 
| #define yy_new_buffer yy_create_buffer
| 
| #define yy_set_interactive(is_interactive) \
| 	{ \
| 	if ( ! YY_CURRENT_BUFFER ){ \
|         yyensure_buffer_stack (); \
| 		YY_CURRENT_BUFFER_LVALUE =    \
|             yy_create_buffer(yyin,YY_BUF_SIZE ); \
| 	} \
| 	YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
| 	}
| 
| #define yy_set_bol(at_bol) \
| 	{ \
| 	if ( ! YY_CURRENT_BUFFER ){\
|         yyensure_buffer_stack (); \
| 		YY_CURRENT_BUFFER_LVALUE =    \
|             yy_create_buffer(yyin,YY_BUF_SIZE ); \
| 	} \
| 	YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
| 	}
| 
| #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
| 
| /* Begin user sect3 */
| 
| typedef unsigned char YY_CHAR;
| 
| FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
| 
| typedef int yy_state_type;
| 
| extern int yylineno;
| 
| int yylineno = 1;
| 
| extern char *yytext;
| #define yytext_ptr yytext
| 
| static yy_state_type yy_get_previous_state (void );
| static yy_state_type yy_try_NUL_trans (yy_state_type current_state  );
| static int yy_get_next_buffer (void );
| static void yy_fatal_error (yyconst char msg[]  );
| 
| /* Done after the current pattern has been matched and before the
|  * corresponding action - sets up yytext.
|  */
| #define YY_DO_BEFORE_ACTION \
| 	(yytext_ptr) = yy_bp; \
| 	(yytext_ptr) -= (yy_more_len); \
| 	yyleng = (size_t) (yy_cp - (yytext_ptr)); \
| 	(yy_hold_char) = *yy_cp; \
| 	*yy_cp = '\0'; \
| 	(yy_c_buf_p) = yy_cp;
| 
| #define YY_NUM_RULES 8
| #define YY_END_OF_BUFFER 9
| /* This struct is not used in this scanner,
|    but its presence is necessary. */
| struct yy_trans_info
| 	{
| 	flex_int32_t yy_verify;
| 	flex_int32_t yy_nxt;
| 	};
| static yyconst flex_int16_t yy_acclist[23] =
|     {   0,
|         9,    7,    8,    8,    1,    7,    8,    2,    7,    8,
|         3,    7,    8,    4,    7,    8,    5,    7,    8,    6,
|         7,    8
|     } ;
| 
| static yyconst flex_int16_t yy_accept[14] =
|     {   0,
|         1,    1,    1,    2,    4,    5,    8,   11,   14,   17,
|        20,   23,   23
|     } ;
| 
| static yyconst flex_int32_t yy_ec[256] =
|     {   0,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    2,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    3,    4,    5,    6,
| 
|         7,    8,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
| 
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
|         1,    1,    1,    1,    1
|     } ;
| 
| static yyconst flex_int32_t yy_meta[9] =
|     {   0,
|         1,    1,    1,    1,    1,    1,    1,    1
|     } ;
| 
| static yyconst flex_int16_t yy_base[13] =
|     {   0,
|         0,    0,    9,   10,   10,   10,   10,   10,   10,   10,
|        10,   10
|     } ;
| 
| static yyconst flex_int16_t yy_def[13] =
|     {   0,
|        12,    1,   12,   12,   12,   12,   12,   12,   12,   12,
|        12,    0
|     } ;
| 
| static yyconst flex_int16_t yy_nxt[19] =
|     {   0,
|         4,    5,    6,    7,    8,    9,   10,   11,   12,    3,
|        12,   12,   12,   12,   12,   12,   12,   12
|     } ;
| 
| static yyconst flex_int16_t yy_chk[19] =
|     {   0,
|         1,    1,    1,    1,    1,    1,    1,    1,    3,   12,
|        12,   12,   12,   12,   12,   12,   12,   12
|     } ;
| 
| extern int yy_flex_debug;
| int yy_flex_debug = 0;
| 
| static yy_state_type *yy_state_buf=0, *yy_state_ptr=0;
| static char *yy_full_match;
| static int yy_lp;
| #define REJECT \
| { \
| *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \
| yy_cp = (yy_full_match); /* restore poss. backed-over text */ \
| ++(yy_lp); \
| goto find_rule; \
| }
| 
| static int yy_more_flag = 0;
| static int yy_more_len = 0;
| #define yymore() ((yy_more_flag) = 1)
| #define YY_MORE_ADJ (yy_more_len)
| #define YY_RESTORE_YY_MORE_OFFSET
| char *yytext;
| #line 1 "conftest.l"
| #line 477 "lex.yy.c"
| 
| #define INITIAL 0
| 
| #ifndef YY_NO_UNISTD_H
| /* Special case for "unistd.h", since it is non-ANSI. We include it way
|  * down here because we want the user's section 1 to have been scanned first.
|  * The user has a chance to override it with an option.
|  */
| #include <unistd.h>
| #endif
| 
| #ifndef YY_EXTRA_TYPE
| #define YY_EXTRA_TYPE void *
| #endif
| 
| static int yy_init_globals (void );
| 
| /* Accessor methods to globals.
|    These are made visible to non-reentrant scanners for convenience. */
| 
| int yylex_destroy (void );
| 
| int yyget_debug (void );
| 
| void yyset_debug (int debug_flag  );
| 
| YY_EXTRA_TYPE yyget_extra (void );
| 
| void yyset_extra (YY_EXTRA_TYPE user_defined  );
| 
| FILE *yyget_in (void );
| 
| void yyset_in  (FILE * in_str  );
| 
| FILE *yyget_out (void );
| 
| void yyset_out  (FILE * out_str  );
| 
| int yyget_leng (void );
| 
| char *yyget_text (void );
| 
| int yyget_lineno (void );
| 
| void yyset_lineno (int line_number  );
| 
| /* Macros after this point can all be overridden by user definitions in
|  * section 1.
|  */
| 
| #ifndef YY_SKIP_YYWRAP
| #ifdef __cplusplus
| extern "C" int yywrap (void );
| #else
| extern int yywrap (void );
| #endif
| #endif
| 
|     static void yyunput (int c,char *buf_ptr  );
|     
| #ifndef yytext_ptr
| static void yy_flex_strncpy (char *,yyconst char *,int );
| #endif
| 
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen (yyconst char * );
| #endif
| 
| #ifndef YY_NO_INPUT
| 
| #ifdef __cplusplus
| static int yyinput (void );
| #else
| static int input (void );
| #endif
| 
| #endif
| 
| /* Amount of stuff to slurp up with each read. */
| #ifndef YY_READ_BUF_SIZE
| #ifdef __ia64__
| /* On IA-64, the buffer size is 16k, not 8k */
| #define YY_READ_BUF_SIZE 16384
| #else
| #define YY_READ_BUF_SIZE 8192
| #endif /* __ia64__ */
| #endif
| 
| /* Copy whatever the last rule matched to the standard output. */
| #ifndef ECHO
| /* This used to be an fputs(), but since the string might contain NUL's,
|  * we now use fwrite().
|  */
| #define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0)
| #endif
| 
| /* Gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
|  * is returned in "result".
|  */
| #ifndef YY_INPUT
| #define YY_INPUT(buf,result,max_size) \
| 	if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
| 		{ \
| 		int c = '*'; \
| 		size_t n; \
| 		for ( n = 0; n < max_size && \
| 			     (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
| 			buf[n] = (char) c; \
| 		if ( c == '\n' ) \
| 			buf[n++] = (char) c; \
| 		if ( c == EOF && ferror( yyin ) ) \
| 			YY_FATAL_ERROR( "input in flex scanner failed" ); \
| 		result = n; \
| 		} \
| 	else \
| 		{ \
| 		errno=0; \
| 		while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
| 			{ \
| 			if( errno != EINTR) \
| 				{ \
| 				YY_FATAL_ERROR( "input in flex scanner failed" ); \
| 				break; \
| 				} \
| 			errno=0; \
| 			clearerr(yyin); \
| 			} \
| 		}\
| \
| 
| #endif
| 
| /* No semi-colon after return; correct usage is to write "yyterminate();" -
|  * we don't want an extra ';' after the "return" because that will cause
|  * some compilers to complain about unreachable statements.
|  */
| #ifndef yyterminate
| #define yyterminate() return YY_NULL
| #endif
| 
| /* Number of entries by which start-condition stack grows. */
| #ifndef YY_START_STACK_INCR
| #define YY_START_STACK_INCR 25
| #endif
| 
| /* Report a fatal error. */
| #ifndef YY_FATAL_ERROR
| #define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
| #endif
| 
| /* end tables serialization structures and prototypes */
| 
| /* Default declaration of generated scanner - a define so the user can
|  * easily add parameters.
|  */
| #ifndef YY_DECL
| #define YY_DECL_IS_OURS 1
| 
| extern int yylex (void);
| 
| #define YY_DECL int yylex (void)
| #endif /* !YY_DECL */
| 
| /* Code executed at the beginning of each rule, after yytext and yyleng
|  * have been set up.
|  */
| #ifndef YY_USER_ACTION
| #define YY_USER_ACTION
| #endif
| 
| /* Code executed at the end of each rule. */
| #ifndef YY_BREAK
| #define YY_BREAK break;
| #endif
| 
| #define YY_RULE_SETUP \
| 	YY_USER_ACTION
| 
| /** The main scanner function which does all the work.
|  */
| YY_DECL
| {
| 	register yy_state_type yy_current_state;
| 	register char *yy_cp, *yy_bp;
| 	register int yy_act;
|     
| #line 1 "conftest.l"
| 
| #line 666 "lex.yy.c"
| 
| 	if ( !(yy_init) )
| 		{
| 		(yy_init) = 1;
| 
| #ifdef YY_USER_INIT
| 		YY_USER_INIT;
| #endif
| 
|         /* Create the reject buffer large enough to save one state per allowed character. */
|         if ( ! (yy_state_buf) )
|             (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE  );
|             if ( ! (yy_state_buf) )
|                 YY_FATAL_ERROR( "out of dynamic memory in yylex()" );
| 
| 		if ( ! (yy_start) )
| 			(yy_start) = 1;	/* first start state */
| 
| 		if ( ! yyin )
| 			yyin = stdin;
| 
| 		if ( ! yyout )
| 			yyout = stdout;
| 
| 		if ( ! YY_CURRENT_BUFFER ) {
| 			yyensure_buffer_stack ();
| 			YY_CURRENT_BUFFER_LVALUE =
| 				yy_create_buffer(yyin,YY_BUF_SIZE );
| 		}
| 
| 		yy_load_buffer_state( );
| 		}
| 
| 	while ( 1 )		/* loops until end-of-file is reached */
| 		{
| 		(yy_more_len) = 0;
| 		if ( (yy_more_flag) )
| 			{
| 			(yy_more_len) = (yy_c_buf_p) - (yytext_ptr);
| 			(yy_more_flag) = 0;
| 			}
| 		yy_cp = (yy_c_buf_p);
| 
| 		/* Support of yytext. */
| 		*yy_cp = (yy_hold_char);
| 
| 		/* yy_bp points to the position in yy_ch_buf of the start of
| 		 * the current run.
| 		 */
| 		yy_bp = yy_cp;
| 
| 		yy_current_state = (yy_start);
| 
| 		(yy_state_ptr) = (yy_state_buf);
| 		*(yy_state_ptr)++ = yy_current_state;
| 
| yy_match:
| 		do
| 			{
| 			register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
| 			while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| 				{
| 				yy_current_state = (int) yy_def[yy_current_state];
| 				if ( yy_current_state >= 13 )
| 					yy_c = yy_meta[(unsigned int) yy_c];
| 				}
| 			yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| 			*(yy_state_ptr)++ = yy_current_state;
| 			++yy_cp;
| 			}
| 		while ( yy_base[yy_current_state] != 10 );
| 
| yy_find_action:
| 		yy_current_state = *--(yy_state_ptr);
| 		(yy_lp) = yy_accept[yy_current_state];
| find_rule: /* we branch to this label when backing up */
| 		for ( ; ; ) /* until we find what rule we matched */
| 			{
| 			if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] )
| 				{
| 				yy_act = yy_acclist[(yy_lp)];
| 					{
| 					(yy_full_match) = yy_cp;
| 					break;
| 					}
| 				}
| 			--yy_cp;
| 			yy_current_state = *--(yy_state_ptr);
| 			(yy_lp) = yy_accept[yy_current_state];
| 			}
| 
| 		YY_DO_BEFORE_ACTION;
| 
| do_action:	/* This label is used only to access EOF actions. */
| 
| 		switch ( yy_act )
| 	{ /* beginning of action switch */
| case 1:
| YY_RULE_SETUP
| #line 2 "conftest.l"
| { ECHO; }
| 	YY_BREAK
| case 2:
| YY_RULE_SETUP
| #line 3 "conftest.l"
| { REJECT; }
| 	YY_BREAK
| case 3:
| YY_RULE_SETUP
| #line 4 "conftest.l"
| { yymore (); }
| 	YY_BREAK
| case 4:
| YY_RULE_SETUP
| #line 5 "conftest.l"
| { yyless (1); }
| 	YY_BREAK
| case 5:
| YY_RULE_SETUP
| #line 6 "conftest.l"
| { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument.  */
|     yyless ((input () != 0)); }
| 	YY_BREAK
| case 6:
| YY_RULE_SETUP
| #line 8 "conftest.l"
| { unput (yytext[0]); }
| 	YY_BREAK
| case 7:
| YY_RULE_SETUP
| #line 9 "conftest.l"
| { BEGIN INITIAL; }
| 	YY_BREAK
| case 8:
| YY_RULE_SETUP
| #line 10 "conftest.l"
| ECHO;
| 	YY_BREAK
| #line 805 "lex.yy.c"
| 			case YY_STATE_EOF(INITIAL):
| 				yyterminate();
| 
| 	case YY_END_OF_BUFFER:
| 		{
| 		/* Amount of text matched not including the EOB char. */
| 		int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
| 
| 		/* Undo the effects of YY_DO_BEFORE_ACTION. */
| 		*yy_cp = (yy_hold_char);
| 		YY_RESTORE_YY_MORE_OFFSET
| 
| 		if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
| 			{
| 			/* We're scanning a new file or input source.  It's
| 			 * possible that this happened because the user
| 			 * just pointed yyin at a new source and called
| 			 * yylex().  If so, then we have to assure
| 			 * consistency between YY_CURRENT_BUFFER and our
| 			 * globals.  Here is the right place to do so, because
| 			 * this is the first action (other than possibly a
| 			 * back-up) that will match for the new input source.
| 			 */
| 			(yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| 			YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
| 			YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
| 			}
| 
| 		/* Note that here we test for yy_c_buf_p "<=" to the position
| 		 * of the first EOB in the buffer, since yy_c_buf_p will
| 		 * already have been incremented past the NUL character
| 		 * (since all states make transitions on EOB to the
| 		 * end-of-buffer state).  Contrast this with the test
| 		 * in input().
| 		 */
| 		if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| 			{ /* This was really a NUL. */
| 			yy_state_type yy_next_state;
| 
| 			(yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
| 
| 			yy_current_state = yy_get_previous_state(  );
| 
| 			/* Okay, we're now positioned to make the NUL
| 			 * transition.  We couldn't have
| 			 * yy_get_previous_state() go ahead and do it
| 			 * for us because it doesn't know how to deal
| 			 * with the possibility of jamming (and we don't
| 			 * want to build jamming into it because then it
| 			 * will run more slowly).
| 			 */
| 
| 			yy_next_state = yy_try_NUL_trans( yy_current_state );
| 
| 			yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| 
| 			if ( yy_next_state )
| 				{
| 				/* Consume the NUL. */
| 				yy_cp = ++(yy_c_buf_p);
| 				yy_current_state = yy_next_state;
| 				goto yy_match;
| 				}
| 
| 			else
| 				{
| 				yy_cp = (yy_c_buf_p);
| 				goto yy_find_action;
| 				}
| 			}
| 
| 		else switch ( yy_get_next_buffer(  ) )
| 			{
| 			case EOB_ACT_END_OF_FILE:
| 				{
| 				(yy_did_buffer_switch_on_eof) = 0;
| 
| 				if ( yywrap( ) )
| 					{
| 					/* Note: because we've taken care in
| 					 * yy_get_next_buffer() to have set up
| 					 * yytext, we can now set up
| 					 * yy_c_buf_p so that if some total
| 					 * hoser (like flex itself) wants to
| 					 * call the scanner after we return the
| 					 * YY_NULL, it'll still work - another
| 					 * YY_NULL will get returned.
| 					 */
| 					(yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
| 
| 					yy_act = YY_STATE_EOF(YY_START);
| 					goto do_action;
| 					}
| 
| 				else
| 					{
| 					if ( ! (yy_did_buffer_switch_on_eof) )
| 						YY_NEW_FILE;
| 					}
| 				break;
| 				}
| 
| 			case EOB_ACT_CONTINUE_SCAN:
| 				(yy_c_buf_p) =
| 					(yytext_ptr) + yy_amount_of_matched_text;
| 
| 				yy_current_state = yy_get_previous_state(  );
| 
| 				yy_cp = (yy_c_buf_p);
| 				yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| 				goto yy_match;
| 
| 			case EOB_ACT_LAST_MATCH:
| 				(yy_c_buf_p) =
| 				&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
| 
| 				yy_current_state = yy_get_previous_state(  );
| 
| 				yy_cp = (yy_c_buf_p);
| 				yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| 				goto yy_find_action;
| 			}
| 		break;
| 		}
| 
| 	default:
| 		YY_FATAL_ERROR(
| 			"fatal flex scanner internal error--no action found" );
| 	} /* end of action switch */
| 		} /* end of scanning one token */
| } /* end of yylex */
| 
| /* yy_get_next_buffer - try to read in a new buffer
|  *
|  * Returns a code representing an action:
|  *	EOB_ACT_LAST_MATCH -
|  *	EOB_ACT_CONTINUE_SCAN - continue scanning from current position
|  *	EOB_ACT_END_OF_FILE - end of file
|  */
| static int yy_get_next_buffer (void)
| {
|     	register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
| 	register char *source = (yytext_ptr);
| 	register int number_to_move, i;
| 	int ret_val;
| 
| 	if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
| 		YY_FATAL_ERROR(
| 		"fatal flex scanner internal error--end of buffer missed" );
| 
| 	if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
| 		{ /* Don't try to fill the buffer, so this is an EOF. */
| 		if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
| 			{
| 			/* We matched a single character, the EOB, so
| 			 * treat this as a final EOF.
| 			 */
| 			return EOB_ACT_END_OF_FILE;
| 			}
| 
| 		else
| 			{
| 			/* We matched some text prior to the EOB, first
| 			 * process it.
| 			 */
| 			return EOB_ACT_LAST_MATCH;
| 			}
| 		}
| 
| 	/* Try to read more data. */
| 
| 	/* First move last chars to start of buffer. */
| 	number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
| 
| 	for ( i = 0; i < number_to_move; ++i )
| 		*(dest++) = *(source++);
| 
| 	if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
| 		/* don't do the read, it's not guaranteed to return an EOF,
| 		 * just force an EOF
| 		 */
| 		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
| 
| 	else
| 		{
| 			int num_to_read =
| 			YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
| 
| 		while ( num_to_read <= 0 )
| 			{ /* Not enough room in the buffer - grow it. */
| 
| 			YY_FATAL_ERROR(
| "input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
| 
| 			}
| 
| 		if ( num_to_read > YY_READ_BUF_SIZE )
| 			num_to_read = YY_READ_BUF_SIZE;
| 
| 		/* Read in more data. */
| 		YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
| 			(yy_n_chars), (size_t) num_to_read );
| 
| 		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| 		}
| 
| 	if ( (yy_n_chars) == 0 )
| 		{
| 		if ( number_to_move == YY_MORE_ADJ )
| 			{
| 			ret_val = EOB_ACT_END_OF_FILE;
| 			yyrestart(yyin  );
| 			}
| 
| 		else
| 			{
| 			ret_val = EOB_ACT_LAST_MATCH;
| 			YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
| 				YY_BUFFER_EOF_PENDING;
| 			}
| 		}
| 
| 	else
| 		ret_val = EOB_ACT_CONTINUE_SCAN;
| 
| 	if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
| 		/* Extend the array by 50%, plus the number we really need. */
| 		yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
| 		YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size  );
| 		if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
| 			YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
| 	}
| 
| 	(yy_n_chars) += number_to_move;
| 	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
| 	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
| 
| 	(yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
| 
| 	return ret_val;
| }
| 
| /* yy_get_previous_state - get the state just before the EOB char was reached */
| 
|     static yy_state_type yy_get_previous_state (void)
| {
| 	register yy_state_type yy_current_state;
| 	register char *yy_cp;
|     
| 	yy_current_state = (yy_start);
| 
| 	(yy_state_ptr) = (yy_state_buf);
| 	*(yy_state_ptr)++ = yy_current_state;
| 
| 	for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
| 		{
| 		register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
| 		while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| 			{
| 			yy_current_state = (int) yy_def[yy_current_state];
| 			if ( yy_current_state >= 13 )
| 				yy_c = yy_meta[(unsigned int) yy_c];
| 			}
| 		yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| 		*(yy_state_ptr)++ = yy_current_state;
| 		}
| 
| 	return yy_current_state;
| }
| 
| /* yy_try_NUL_trans - try to make a transition on the NUL character
|  *
|  * synopsis
|  *	next_state = yy_try_NUL_trans( current_state );
|  */
|     static yy_state_type yy_try_NUL_trans  (yy_state_type yy_current_state )
| {
| 	register int yy_is_jam;
|     
| 	register YY_CHAR yy_c = 1;
| 	while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| 		{
| 		yy_current_state = (int) yy_def[yy_current_state];
| 		if ( yy_current_state >= 13 )
| 			yy_c = yy_meta[(unsigned int) yy_c];
| 		}
| 	yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| 	yy_is_jam = (yy_current_state == 12);
| 	if ( ! yy_is_jam )
| 		*(yy_state_ptr)++ = yy_current_state;
| 
| 	return yy_is_jam ? 0 : yy_current_state;
| }
| 
|     static void yyunput (int c, register char * yy_bp )
| {
| 	register char *yy_cp;
|     
|     yy_cp = (yy_c_buf_p);
| 
| 	/* undo effects of setting up yytext */
| 	*yy_cp = (yy_hold_char);
| 
| 	if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| 		{ /* need to shift things up to make room */
| 		/* +2 for EOB chars. */
| 		register int number_to_move = (yy_n_chars) + 2;
| 		register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
| 					YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
| 		register char *source =
| 				&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
| 
| 		while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
| 			*--dest = *--source;
| 
| 		yy_cp += (int) (dest - source);
| 		yy_bp += (int) (dest - source);
| 		YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
| 			(yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
| 
| 		if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| 			YY_FATAL_ERROR( "flex scanner push-back overflow" );
| 		}
| 
| 	*--yy_cp = (char) c;
| 
| 	(yytext_ptr) = yy_bp;
| 	(yy_hold_char) = *yy_cp;
| 	(yy_c_buf_p) = yy_cp;
| }
| 
| #ifndef YY_NO_INPUT
| #ifdef __cplusplus
|     static int yyinput (void)
| #else
|     static int input  (void)
| #endif
| 
| {
| 	int c;
|     
| 	*(yy_c_buf_p) = (yy_hold_char);
| 
| 	if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
| 		{
| 		/* yy_c_buf_p now points to the character we want to return.
| 		 * If this occurs *before* the EOB characters, then it's a
| 		 * valid NUL; if not, then we've hit the end of the buffer.
| 		 */
| 		if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| 			/* This was really a NUL. */
| 			*(yy_c_buf_p) = '\0';
| 
| 		else
| 			{ /* need more input */
| 			int offset = (yy_c_buf_p) - (yytext_ptr);
| 			++(yy_c_buf_p);
| 
| 			switch ( yy_get_next_buffer(  ) )
| 				{
| 				case EOB_ACT_LAST_MATCH:
| 					/* This happens because yy_g_n_b()
| 					 * sees that we've accumulated a
| 					 * token and flags that we need to
| 					 * try matching the token before
| 					 * proceeding.  But for input(),
| 					 * there's no matching to consider.
| 					 * So convert the EOB_ACT_LAST_MATCH
| 					 * to EOB_ACT_END_OF_FILE.
| 					 */
| 
| 					/* Reset buffer status. */
| 					yyrestart(yyin );
| 
| 					/*FALLTHROUGH*/
| 
| 				case EOB_ACT_END_OF_FILE:
| 					{
| 					if ( yywrap( ) )
| 						return EOF;
| 
| 					if ( ! (yy_did_buffer_switch_on_eof) )
| 						YY_NEW_FILE;
| #ifdef __cplusplus
| 					return yyinput();
| #else
| 					return input();
| #endif
| 					}
| 
| 				case EOB_ACT_CONTINUE_SCAN:
| 					(yy_c_buf_p) = (yytext_ptr) + offset;
| 					break;
| 				}
| 			}
| 		}
| 
| 	c = *(unsigned char *) (yy_c_buf_p);	/* cast for 8-bit char's */
| 	*(yy_c_buf_p) = '\0';	/* preserve yytext */
| 	(yy_hold_char) = *++(yy_c_buf_p);
| 
| 	return c;
| }
| #endif	/* ifndef YY_NO_INPUT */
| 
| /** Immediately switch to a different input stream.
|  * @param input_file A readable stream.
|  * 
|  * @note This function does not reset the start condition to @c INITIAL .
|  */
|     void yyrestart  (FILE * input_file )
| {
|     
| 	if ( ! YY_CURRENT_BUFFER ){
|         yyensure_buffer_stack ();
| 		YY_CURRENT_BUFFER_LVALUE =
|             yy_create_buffer(yyin,YY_BUF_SIZE );
| 	}
| 
| 	yy_init_buffer(YY_CURRENT_BUFFER,input_file );
| 	yy_load_buffer_state( );
| }
| 
| /** Switch to a different input buffer.
|  * @param new_buffer The new input buffer.
|  * 
|  */
|     void yy_switch_to_buffer  (YY_BUFFER_STATE  new_buffer )
| {
|     
| 	/* TODO. We should be able to replace this entire function body
| 	 * with
| 	 *		yypop_buffer_state();
| 	 *		yypush_buffer_state(new_buffer);
|      */
| 	yyensure_buffer_stack ();
| 	if ( YY_CURRENT_BUFFER == new_buffer )
| 		return;
| 
| 	if ( YY_CURRENT_BUFFER )
| 		{
| 		/* Flush out information for old buffer. */
| 		*(yy_c_buf_p) = (yy_hold_char);
| 		YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| 		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| 		}
| 
| 	YY_CURRENT_BUFFER_LVALUE = new_buffer;
| 	yy_load_buffer_state( );
| 
| 	/* We don't actually know whether we did this switch during
| 	 * EOF (yywrap()) processing, but the only time this flag
| 	 * is looked at is after yywrap() is called, so it's safe
| 	 * to go ahead and always set it.
| 	 */
| 	(yy_did_buffer_switch_on_eof) = 1;
| }
| 
| static void yy_load_buffer_state  (void)
| {
|     	(yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| 	(yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
| 	yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
| 	(yy_hold_char) = *(yy_c_buf_p);
| }
| 
| /** Allocate and initialize an input buffer state.
|  * @param file A readable stream.
|  * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
|  * 
|  * @return the allocated buffer state.
|  */
|     YY_BUFFER_STATE yy_create_buffer  (FILE * file, int  size )
| {
| 	YY_BUFFER_STATE b;
|     
| 	b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state )  );
| 	if ( ! b )
| 		YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
| 
| 	b->yy_buf_size = size;
| 
| 	/* yy_ch_buf has to be 2 characters longer than the size given because
| 	 * we need to put in 2 end-of-buffer characters.
| 	 */
| 	b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2  );
| 	if ( ! b->yy_ch_buf )
| 		YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
| 
| 	b->yy_is_our_buffer = 1;
| 
| 	yy_init_buffer(b,file );
| 
| 	return b;
| }
| 
| /** Destroy the buffer.
|  * @param b a buffer created with yy_create_buffer()
|  * 
|  */
|     void yy_delete_buffer (YY_BUFFER_STATE  b )
| {
|     
| 	if ( ! b )
| 		return;
| 
| 	if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
| 		YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
| 
| 	if ( b->yy_is_our_buffer )
| 		yyfree((void *) b->yy_ch_buf  );
| 
| 	yyfree((void *) b  );
| }
| 
| #ifndef __cplusplus
| extern int isatty (int );
| #endif /* __cplusplus */
|     
| /* Initializes or reinitializes a buffer.
|  * This function is sometimes called more than once on the same buffer,
|  * such as during a yyrestart() or at EOF.
|  */
|     static void yy_init_buffer  (YY_BUFFER_STATE  b, FILE * file )
| 
| {
| 	int oerrno = errno;
|     
| 	yy_flush_buffer(b );
| 
| 	b->yy_input_file = file;
| 	b->yy_fill_buffer = 1;
| 
|     /* If b is the current buffer, then yy_init_buffer was _probably_
|      * called from yyrestart() or through yy_get_next_buffer.
|      * In that case, we don't want to reset the lineno or column.
|      */
|     if (b != YY_CURRENT_BUFFER){
|         b->yy_bs_lineno = 1;
|         b->yy_bs_column = 0;
|     }
| 
|         b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
|     
| 	errno = oerrno;
| }
| 
| /** Discard all buffered characters. On the next scan, YY_INPUT will be called.
|  * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
|  * 
|  */
|     void yy_flush_buffer (YY_BUFFER_STATE  b )
| {
|     	if ( ! b )
| 		return;
| 
| 	b->yy_n_chars = 0;
| 
| 	/* We always need two end-of-buffer characters.  The first causes
| 	 * a transition to the end-of-buffer state.  The second causes
| 	 * a jam in that state.
| 	 */
| 	b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
| 	b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
| 
| 	b->yy_buf_pos = &b->yy_ch_buf[0];
| 
| 	b->yy_at_bol = 1;
| 	b->yy_buffer_status = YY_BUFFER_NEW;
| 
| 	if ( b == YY_CURRENT_BUFFER )
| 		yy_load_buffer_state( );
| }
| 
| /** Pushes the new state onto the stack. The new state becomes
|  *  the current state. This function will allocate the stack
|  *  if necessary.
|  *  @param new_buffer The new state.
|  *  
|  */
| void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
| {
|     	if (new_buffer == NULL)
| 		return;
| 
| 	yyensure_buffer_stack();
| 
| 	/* This block is copied from yy_switch_to_buffer. */
| 	if ( YY_CURRENT_BUFFER )
| 		{
| 		/* Flush out information for old buffer. */
| 		*(yy_c_buf_p) = (yy_hold_char);
| 		YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| 		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| 		}
| 
| 	/* Only push if top exists. Otherwise, replace top. */
| 	if (YY_CURRENT_BUFFER)
| 		(yy_buffer_stack_top)++;
| 	YY_CURRENT_BUFFER_LVALUE = new_buffer;
| 
| 	/* copied from yy_switch_to_buffer. */
| 	yy_load_buffer_state( );
| 	(yy_did_buffer_switch_on_eof) = 1;
| }
| 
| /** Removes and deletes the top of the stack, if present.
|  *  The next element becomes the new top.
|  *  
|  */
| void yypop_buffer_state (void)
| {
|     	if (!YY_CURRENT_BUFFER)
| 		return;
| 
| 	yy_delete_buffer(YY_CURRENT_BUFFER );
| 	YY_CURRENT_BUFFER_LVALUE = NULL;
| 	if ((yy_buffer_stack_top) > 0)
| 		--(yy_buffer_stack_top);
| 
| 	if (YY_CURRENT_BUFFER) {
| 		yy_load_buffer_state( );
| 		(yy_did_buffer_switch_on_eof) = 1;
| 	}
| }
| 
| /* Allocates the stack if it does not exist.
|  *  Guarantees space for at least one push.
|  */
| static void yyensure_buffer_stack (void)
| {
| 	int num_to_alloc;
|     
| 	if (!(yy_buffer_stack)) {
| 
| 		/* First allocation is just for 2 elements, since we don't know if this
| 		 * scanner will even need a stack. We use 2 instead of 1 to avoid an
| 		 * immediate realloc on the next call.
|          */
| 		num_to_alloc = 1;
| 		(yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
| 								(num_to_alloc * sizeof(struct yy_buffer_state*)
| 								);
| 		if ( ! (yy_buffer_stack) )
| 			YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
| 								  
| 		memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
| 				
| 		(yy_buffer_stack_max) = num_to_alloc;
| 		(yy_buffer_stack_top) = 0;
| 		return;
| 	}
| 
| 	if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
| 
| 		/* Increase the buffer to prepare for a possible push. */
| 		int grow_size = 8 /* arbitrary grow size */;
| 
| 		num_to_alloc = (yy_buffer_stack_max) + grow_size;
| 		(yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
| 								((yy_buffer_stack),
| 								num_to_alloc * sizeof(struct yy_buffer_state*)
| 								);
| 		if ( ! (yy_buffer_stack) )
| 			YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
| 
| 		/* zero only the new slots.*/
| 		memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
| 		(yy_buffer_stack_max) = num_to_alloc;
| 	}
| }
| 
| /** Setup the input buffer state to scan directly from a user-specified character buffer.
|  * @param base the character buffer
|  * @param size the size in bytes of the character buffer
|  * 
|  * @return the newly allocated buffer state object. 
|  */
| YY_BUFFER_STATE yy_scan_buffer  (char * base, yy_size_t  size )
| {
| 	YY_BUFFER_STATE b;
|     
| 	if ( size < 2 ||
| 	     base[size-2] != YY_END_OF_BUFFER_CHAR ||
| 	     base[size-1] != YY_END_OF_BUFFER_CHAR )
| 		/* They forgot to leave room for the EOB's. */
| 		return 0;
| 
| 	b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state )  );
| 	if ( ! b )
| 		YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
| 
| 	b->yy_buf_size = size - 2;	/* "- 2" to take care of EOB's */
| 	b->yy_buf_pos = b->yy_ch_buf = base;
| 	b->yy_is_our_buffer = 0;
| 	b->yy_input_file = 0;
| 	b->yy_n_chars = b->yy_buf_size;
| 	b->yy_is_interactive = 0;
| 	b->yy_at_bol = 1;
| 	b->yy_fill_buffer = 0;
| 	b->yy_buffer_status = YY_BUFFER_NEW;
| 
| 	yy_switch_to_buffer(b  );
| 
| 	return b;
| }
| 
| /** Setup the input buffer state to scan a string. The next call to yylex() will
|  * scan from a @e copy of @a str.
|  * @param yystr a NUL-terminated string to scan
|  * 
|  * @return the newly allocated buffer state object.
|  * @note If you want to scan bytes that may contain NUL values, then use
|  *       yy_scan_bytes() instead.
|  */
| YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
| {
|     
| 	return yy_scan_bytes(yystr,strlen(yystr) );
| }
| 
| /** Setup the input buffer state to scan the given bytes. The next call to yylex() will
|  * scan from a @e copy of @a bytes.
|  * @param yybytes the byte buffer to scan
|  * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes.
|  * 
|  * @return the newly allocated buffer state object.
|  */
| YY_BUFFER_STATE yy_scan_bytes  (yyconst char * yybytes, int  _yybytes_len )
| {
| 	YY_BUFFER_STATE b;
| 	char *buf;
| 	yy_size_t n;
| 	int i;
|     
| 	/* Get memory for full buffer, including space for trailing EOB's. */
| 	n = _yybytes_len + 2;
| 	buf = (char *) yyalloc(n  );
| 	if ( ! buf )
| 		YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
| 
| 	for ( i = 0; i < _yybytes_len; ++i )
| 		buf[i] = yybytes[i];
| 
| 	buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
| 
| 	b = yy_scan_buffer(buf,n );
| 	if ( ! b )
| 		YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
| 
| 	/* It's okay to grow etc. this buffer, and we should throw it
| 	 * away when we're done.
| 	 */
| 	b->yy_is_our_buffer = 1;
| 
| 	return b;
| }
| 
| #ifndef YY_EXIT_FAILURE
| #define YY_EXIT_FAILURE 2
| #endif
| 
| static void yy_fatal_error (yyconst char* msg )
| {
|     	(void) fprintf( stderr, "%s\n", msg );
| 	exit( YY_EXIT_FAILURE );
| }
| 
| /* Redefine yyless() so it works in section 3 code. */
| 
| #undef yyless
| #define yyless(n) \
| 	do \
| 		{ \
| 		/* Undo effects of setting up yytext. */ \
|         int yyless_macro_arg = (n); \
|         YY_LESS_LINENO(yyless_macro_arg);\
| 		yytext[yyleng] = (yy_hold_char); \
| 		(yy_c_buf_p) = yytext + yyless_macro_arg; \
| 		(yy_hold_char) = *(yy_c_buf_p); \
| 		*(yy_c_buf_p) = '\0'; \
| 		yyleng = yyless_macro_arg; \
| 		} \
| 	while ( 0 )
| 
| /* Accessor  methods (get/set functions) to struct members. */
| 
| /** Get the current line number.
|  * 
|  */
| int yyget_lineno  (void)
| {
|         
|     return yylineno;
| }
| 
| /** Get the input stream.
|  * 
|  */
| FILE *yyget_in  (void)
| {
|         return yyin;
| }
| 
| /** Get the output stream.
|  * 
|  */
| FILE *yyget_out  (void)
| {
|         return yyout;
| }
| 
| /** Get the length of the current token.
|  * 
|  */
| int yyget_leng  (void)
| {
|         return yyleng;
| }
| 
| /** Get the current token.
|  * 
|  */
| 
| char *yyget_text  (void)
| {
|         return yytext;
| }
| 
| /** Set the current line number.
|  * @param line_number
|  * 
|  */
| void yyset_lineno (int  line_number )
| {
|     
|     yylineno = line_number;
| }
| 
| /** Set the input stream. This does not discard the current
|  * input buffer.
|  * @param in_str A readable stream.
|  * 
|  * @see yy_switch_to_buffer
|  */
| void yyset_in (FILE *  in_str )
| {
|         yyin = in_str ;
| }
| 
| void yyset_out (FILE *  out_str )
| {
|         yyout = out_str ;
| }
| 
| int yyget_debug  (void)
| {
|         return yy_flex_debug;
| }
| 
| void yyset_debug (int  bdebug )
| {
|         yy_flex_debug = bdebug ;
| }
| 
| static int yy_init_globals (void)
| {
|         /* Initialization is the same as for the non-reentrant scanner.
|      * This function is called from yylex_destroy(), so don't allocate here.
|      */
| 
|     (yy_buffer_stack) = 0;
|     (yy_buffer_stack_top) = 0;
|     (yy_buffer_stack_max) = 0;
|     (yy_c_buf_p) = (char *) 0;
|     (yy_init) = 0;
|     (yy_start) = 0;
| 
|     (yy_state_buf) = 0;
|     (yy_state_ptr) = 0;
|     (yy_full_match) = 0;
|     (yy_lp) = 0;
| 
| /* Defined in main.c */
| #ifdef YY_STDINIT
|     yyin = stdin;
|     yyout = stdout;
| #else
|     yyin = (FILE *) 0;
|     yyout = (FILE *) 0;
| #endif
| 
|     /* For future reference: Set errno on error, since we are called by
|      * yylex_init()
|      */
|     return 0;
| }
| 
| /* yylex_destroy is for both reentrant and non-reentrant scanners. */
| int yylex_destroy  (void)
| {
|     
|     /* Pop the buffer stack, destroying each element. */
| 	while(YY_CURRENT_BUFFER){
| 		yy_delete_buffer(YY_CURRENT_BUFFER  );
| 		YY_CURRENT_BUFFER_LVALUE = NULL;
| 		yypop_buffer_state();
| 	}
| 
| 	/* Destroy the stack itself. */
| 	yyfree((yy_buffer_stack) );
| 	(yy_buffer_stack) = NULL;
| 
|     yyfree ( (yy_state_buf) );
|     (yy_state_buf)  = NULL;
| 
|     /* Reset the globals. This is important in a non-reentrant scanner so the next time
|      * yylex() is called, initialization will occur. */
|     yy_init_globals( );
| 
|     return 0;
| }
| 
| /*
|  * Internal utility routines.
|  */
| 
| #ifndef yytext_ptr
| static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
| {
| 	register int i;
| 	for ( i = 0; i < n; ++i )
| 		s1[i] = s2[i];
| }
| #endif
| 
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen (yyconst char * s )
| {
| 	register int n;
| 	for ( n = 0; s[n]; ++n )
| 		;
| 
| 	return n;
| }
| #endif
| 
| void *yyalloc (yy_size_t  size )
| {
| 	return (void *) malloc( size );
| }
| 
| void *yyrealloc  (void * ptr, yy_size_t  size )
| {
| 	/* The cast to (char *) in the following accommodates both
| 	 * implementations that use char* generic pointers, and those
| 	 * that use void* generic pointers.  It works with the latter
| 	 * because both ANSI C and C++ allow castless assignment from
| 	 * any pointer type to void*, and deal with argument conversions
| 	 * as though doing an assignment.
| 	 */
| 	return (void *) realloc( (char *) ptr, size );
| }
| 
| void yyfree (void * ptr )
| {
| 	free( (char *) ptr );	/* see yyrealloc() for (char *) cast */
| }
| 
| #define YYTABLES_NAME "yytables"
| 
| #line 10 "conftest.l"
| 
| 
| #ifdef YYTEXT_POINTER
| extern char *yytext;
| #endif
| int
| main (void)
| {
|   return ! yylex () + ! yywrap ();
| }
configure:16231: gcc -o conftest -g -O2   conftest.c -lfl  >&5
configure:16231: $? = 0
configure:16241: result: -lfl
configure:16247: checking whether yytext is a pointer
configure:16264: gcc -o conftest -g -O2   conftest.c -lfl  >&5
configure:16264: $? = 0
configure:16272: result: yes
configure:16287: checking for flex
configure:16305: found /usr/bin/flex
configure:16317: result: /usr/bin/flex
configure:16331: checking for pod2man
configure:16349: found /usr/bin/pod2man
configure:16361: result: /usr/bin/pod2man
configure:16378: checking for pod2html
configure:16396: found /usr/bin/pod2html
configure:16408: result: /usr/bin/pod2html
configure:16436: checking for xdg-open
configure:16454: found /usr/bin/xdg-open
configure:16466: result: /usr/bin/xdg-open
configure:16595: checking for doxygen
configure:16628: result: no
configure:16635: checking for doxygen
configure:16663: result: no
configure:16742: checking for pkg-config
configure:16760: found /usr/bin/pkg-config
configure:16772: result: /usr/bin/pkg-config
configure:16797: checking pkg-config is at least version 0.9.0
configure:16800: result: yes
configure:17035: checking for special C compiler options needed for large files
configure:17080: result: no
configure:17086: checking for _FILE_OFFSET_BITS value needed for large files
configure:17111: gcc -c -g -O2  conftest.c >&5
configure:17111: $? = 0
configure:17143: result: no
configure:17280: checking for LIBGNUTLS
configure:17287: $PKG_CONFIG --exists --print-errors "gnutls >= 3.1.10 "
Package gnutls was not found in the pkg-config search path.
Perhaps you should add the directory containing `gnutls.pc'
to the PKG_CONFIG_PATH environment variable
No package 'gnutls' found
configure:17290: $? = 1
configure:17304: $PKG_CONFIG --exists --print-errors "gnutls >= 3.1.10 "
Package gnutls was not found in the pkg-config search path.
Perhaps you should add the directory containing `gnutls.pc'
to the PKG_CONFIG_PATH environment variable
No package 'gnutls' found
configure:17307: $? = 1
configure:17321: result: no
No package 'gnutls' found
configure:17355: checking for LIBGNUTLS
configure:17362: $PKG_CONFIG --exists --print-errors "gnutls >= 1.2.0 gnutls < 3"
Package gnutls was not found in the pkg-config search path.
Perhaps you should add the directory containing `gnutls.pc'
to the PKG_CONFIG_PATH environment variable
No package 'gnutls' found
Package gnutls was not found in the pkg-config search path.
Perhaps you should add the directory containing `gnutls.pc'
to the PKG_CONFIG_PATH environment variable
No package 'gnutls' found
configure:17365: $? = 1
configure:17379: $PKG_CONFIG --exists --print-errors "gnutls >= 1.2.0 gnutls < 3"
Package gnutls was not found in the pkg-config search path.
Perhaps you should add the directory containing `gnutls.pc'
to the PKG_CONFIG_PATH environment variable
No package 'gnutls' found
Package gnutls was not found in the pkg-config search path.
Perhaps you should add the directory containing `gnutls.pc'
to the PKG_CONFIG_PATH environment variable
No package 'gnutls' found
configure:17382: $? = 1
configure:17396: result: no
No package 'gnutls' found
No package 'gnutls' found
configure:17474: checking for libgcrypt-config
configure:17505: result: no
configure:17522: checking for LIBGCRYPT - version >= 1.1.92
configure:17559: result: no
configure:17658: checking whether to use libnl for various network interface purposes
configure:17665: result: yes
configure:17675: checking for LIBNL3
configure:17682: $PKG_CONFIG --exists --print-errors "libnl-route-3.0 >= 3.0 libnl-genl-3.0 >= 3.0"
Package libnl-route-3.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libnl-route-3.0.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libnl-route-3.0' found
Package libnl-genl-3.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libnl-genl-3.0.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libnl-genl-3.0' found
configure:17685: $? = 1
configure:17699: $PKG_CONFIG --exists --print-errors "libnl-route-3.0 >= 3.0 libnl-genl-3.0 >= 3.0"
Package libnl-route-3.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libnl-route-3.0.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libnl-route-3.0' found
Package libnl-genl-3.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libnl-genl-3.0.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libnl-genl-3.0' found
configure:17702: $? = 1
configure:17716: result: no
No package 'libnl-route-3.0' found
No package 'libnl-genl-3.0' found
configure:17748: checking for LIBNL2
configure:17755: $PKG_CONFIG --exists --print-errors "libnl-2.0 >= 2.0"
Package libnl-2.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libnl-2.0.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libnl-2.0' found
configure:17758: $? = 1
configure:17772: $PKG_CONFIG --exists --print-errors "libnl-2.0 >= 2.0"
Package libnl-2.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libnl-2.0.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libnl-2.0' found
configure:17775: $? = 1
configure:17789: result: no
No package 'libnl-2.0' found
configure:17821: checking for LIBNL1
configure:17828: $PKG_CONFIG --exists --print-errors "libnl-1 >= 1.0"
Package libnl-1 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libnl-1.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libnl-1' found
configure:17831: $? = 1
configure:17845: $PKG_CONFIG --exists --print-errors "libnl-1 >= 1.0"
Package libnl-1 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libnl-1.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libnl-1' found
configure:17848: $? = 1
configure:17862: result: no
No package 'libnl-1' found
configure:17940: checking if nl80211.h is new enough
configure:17957: gcc -c -g -O2  conftest.c >&5
configure:17957: $? = 0
configure:17958: result: yes
configure:17968: checking for NL80211_SET_CHANNEL
configure:17981: gcc -c -g -O2  conftest.c >&5
configure:17981: $? = 0
configure:17982: result: yes
configure:18034: checking for libsmi >= 2
configure:18089: gcc -c -g -O2   conftest.c >&5
conftest.c:32:29: fatal error: smi.h: No such file or directory
compilation terminated.
configure:18089: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.12.1"
| #define PACKAGE_STRING "wireshark 1.12.1"
| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/";
| #define PACKAGE_URL "http://www.wireshark.org/";
| #define PACKAGE "wireshark"
| #define VERSION "1.12.1"
| #define VERSION_MAJOR 1
| #define VERSION_MINOR 12
| #define VERSION_MICRO 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define YYTEXT_POINTER 1
| #define HAVE_XDG_OPEN 1
| #define HTML_VIEWER "xdg-open"
| #define HAVE_NL80211 1
| #define HAVE_NL80211_CMD_SET_CHANNEL 1
| /* end confdefs.h.  */
| 
|             #include <smi.h>
| int
| main ()
| {
| 
|   int current, revision, age, n;
|   const int required = 2;
|   if (smiInit(""))
|     exit(1);
|   if (strcmp(SMI_LIBRARY_VERSION, smi_library_version))
|     exit(2);
|   n = sscanf(smi_library_version, "%d:%d:%d", &current, &revision, &age);
|   if (n != 3)
|     exit(3);
|   if (required < current - age || required > current)
|     exit(4);
| 
| 
|   ;
|   return 0;
| }
| 
configure:18097: result: not found
configure:18149: checking for a2x
configure:18182: result: no
configure:18189: checking for a2x
configure:18217: result: no
configure:18238: checking for elinks
configure:18271: result: no
configure:18278: checking for elinks
configure:18306: result: no
configure:18326: checking for fop
configure:18359: result: no
configure:18366: checking for fop
configure:18394: result: no
configure:18414: checking for lynx
configure:18447: result: no
configure:18454: checking for lynx
configure:18482: result: no
configure:18502: checking for w3m
configure:18535: result: no
configure:18542: checking for w3m
configure:18570: result: no
configure:18590: checking for xmllint
configure:18608: found /usr/bin/xmllint
configure:18620: result: /usr/bin/xmllint
configure:18630: checking for xmllint
configure:18646: found /usr/bin/xmllint
configure:18658: result: yes
configure:18678: checking for xsltproc
configure:18711: result: no
configure:18718: checking for xsltproc
configure:18746: result: no
configure:18774: checking for desktop-file-install
configure:18792: found /usr/bin/desktop-file-install
configure:18804: result: /usr/bin/desktop-file-install
configure:18816: checking for pkgproto
configure:18844: result: no
configure:18854: checking for pkgmk
configure:18882: result: no
configure:18892: checking for pkgtrans
configure:18920: result: no
configure:18941: checking for rpm
configure:18969: result: no
configure:18997: checking for dpkg-buildpackage
configure:19013: found /usr/bin/dpkg-buildpackage
configure:19025: result: yes
configure:19037: checking for xcodebuild
configure:19065: result: no
configure:19075: checking for hdiutil
configure:19103: result: no
configure:19113: checking for bless
configure:19141: result: no
configure:19163: checking whether the compiler fails when given an unknown warning option
configure:19178: gcc -c -g -O2 -Wxyzzy-this-will-never-succeed-xyzzy  conftest.c >&5
cc1: error: unrecognized command line option '-Wxyzzy-this-will-never-succeed-xyzzy'
configure:19178: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.12.1"
| #define PACKAGE_STRING "wireshark 1.12.1"
| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/";
| #define PACKAGE_URL "http://www.wireshark.org/";
| #define PACKAGE "wireshark"
| #define VERSION "1.12.1"
| #define VERSION_MAJOR 1
| #define VERSION_MINOR 12
| #define VERSION_MICRO 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define YYTEXT_POINTER 1
| #define HAVE_XDG_OPEN 1
| #define HTML_VIEWER "xdg-open"
| #define HAVE_NL80211 1
| #define HAVE_NL80211_CMD_SET_CHANNEL 1
| /* end confdefs.h.  */
| 
| int
| main ()
| {
| return 0
|   ;
|   return 0;
| }
configure:19191: result: yes
configure:19204: checking whether the compiler fails when given an warning option not supported for C++
configure:19230: g++ -c -g -O2 -Wmissing-prototypes  conftest.cpp >&5
cc1plus: warning: command line option '-Wmissing-prototypes' is valid for Ada/C/ObjC but not for C++ [enabled by default]
configure:19230: $? = 0
configure:19255: g++ -c -g -O2 -Werror -Wmissing-prototypes  conftest.cpp >&5
cc1plus: error: command line option '-Wmissing-prototypes' is valid for Ada/C/ObjC but not for C++ [-Werror]
cc1plus: all warnings being treated as errors
configure:19255: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.12.1"
| #define PACKAGE_STRING "wireshark 1.12.1"
| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/";
| #define PACKAGE_URL "http://www.wireshark.org/";
| #define PACKAGE "wireshark"
| #define VERSION "1.12.1"
| #define VERSION_MAJOR 1
| #define VERSION_MINOR 12
| #define VERSION_MICRO 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define YYTEXT_POINTER 1
| #define HAVE_XDG_OPEN 1
| #define HTML_VIEWER "xdg-open"
| #define HAVE_NL80211 1
| #define HAVE_NL80211_CMD_SET_CHANNEL 1
| /* end confdefs.h.  */
| 
| int
| main ()
| {
| return 0
|   ;
|   return 0;
| }
configure:19293: result: no, adding -Werror
configure:22077: checking whether we can add -Wall -W to CFLAGS
configure:22093: gcc -c -g -O2  -Wall -W  conftest.c >&5
configure:22093: $? = 0
configure:22095: result: yes
configure:22174: checking whether we can add -Wall -W to CXXFLAGS
configure:22196: g++ -c -g -O2  -Werror -Wall -W  conftest.cpp >&5
configure:22196: $? = 0
configure:22198: result: yes
configure:22303: checking whether we can add -Wextra to CFLAGS
configure:22319: gcc -c -g -O2 -Wall -W  -Wextra  conftest.c >&5
configure:22319: $? = 0
configure:22321: result: yes
configure:22400: checking whether we can add -Wextra to CXXFLAGS
configure:22422: g++ -c -g -O2 -Wall -W  -Werror -Wextra  conftest.cpp >&5
configure:22422: $? = 0
configure:22424: result: yes
configure:22529: checking whether we can add -Wdeclaration-after-statement to CFLAGS
configure:22545: gcc -c -g -O2 -Wall -W -Wextra  -Wdeclaration-after-statement  conftest.c >&5
configure:22545: $? = 0
configure:22547: result: yes
configure:22755: checking whether we can add -Wendif-labels to CFLAGS
configure:22771: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement  -Wendif-labels  conftest.c >&5
configure:22771: $? = 0
configure:22773: result: yes
configure:22852: checking whether we can add -Wendif-labels to CXXFLAGS
configure:22874: g++ -c -g -O2 -Wall -W -Wextra  -Werror -Wendif-labels  conftest.cpp >&5
configure:22874: $? = 0
configure:22876: result: yes
configure:22981: checking whether we can add -Wpointer-arith to CFLAGS
configure:22997: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels  -Wpointer-arith  conftest.c >&5
configure:22997: $? = 0
configure:22999: result: yes
configure:23078: checking whether we can add -Wpointer-arith to CXXFLAGS
configure:23100: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels  -Werror -Wpointer-arith  conftest.cpp >&5
configure:23100: $? = 0
configure:23102: result: yes
configure:23207: checking whether we can add -Wno-pointer-sign to CFLAGS
configure:23223: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith  -Wno-pointer-sign  conftest.c >&5
configure:23223: $? = 0
configure:23225: result: yes
configure:23433: checking whether we can add -Warray-bounds to CFLAGS
configure:23449: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign  -Warray-bounds  conftest.c >&5
configure:23449: $? = 0
configure:23451: result: yes
configure:23530: checking whether we can add -Warray-bounds to CXXFLAGS
configure:23552: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith  -Werror -Warray-bounds  conftest.cpp >&5
configure:23552: $? = 0
configure:23554: result: yes
configure:23659: checking whether we can add -Wformat-security to CFLAGS
configure:23675: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds  -Wformat-security  conftest.c >&5
configure:23675: $? = 0
configure:23677: result: yes
configure:23756: checking whether we can add -Wformat-security to CXXFLAGS
configure:23778: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith -Warray-bounds  -Werror -Wformat-security  conftest.cpp >&5
configure:23778: $? = 0
configure:23780: result: yes
configure:23885: checking whether we can add -fwrapv to CFLAGS
configure:23901: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -Werror -fwrapv  conftest.c >&5
configure:23901: $? = 0
configure:23903: result: yes
configure:23982: checking whether we can add -fwrapv to CXXFLAGS
configure:24004: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith -Warray-bounds -Wformat-security -Werror -fwrapv  conftest.cpp >&5
configure:24004: $? = 0
configure:24006: result: yes
configure:24111: checking whether we can add -fno-strict-overflow to CFLAGS
configure:24127: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -Werror -fno-strict-overflow  conftest.c >&5
configure:24127: $? = 0
configure:24129: result: yes
configure:24208: checking whether we can add -fno-strict-overflow to CXXFLAGS
configure:24230: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith -Warray-bounds -Wformat-security -fwrapv -Werror -fno-strict-overflow  conftest.cpp >&5
configure:24230: $? = 0
configure:24232: result: yes
configure:24337: checking whether we can add -fno-delete-null-pointer-checks to CFLAGS
configure:24353: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -Werror -fno-delete-null-pointer-checks  conftest.c >&5
configure:24353: $? = 0
configure:24355: result: yes
configure:24434: checking whether we can add -fno-delete-null-pointer-checks to CXXFLAGS
configure:24456: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -Werror -fno-delete-null-pointer-checks  conftest.cpp >&5
configure:24456: $? = 0
configure:24458: result: yes
configure:24563: checking whether we can add -Wold-style-definition to CFLAGS
configure:24579: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks  -Wold-style-definition  conftest.c >&5
configure:24579: $? = 0
configure:24581: result: yes
configure:24791: checking whether we can add -Wshorten-64-to-32 to CFLAGS
configure:24807: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition  -Wshorten-64-to-32  conftest.c >&5
cc1: error: unrecognized command line option '-Wshorten-64-to-32'
configure:24807: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.12.1"
| #define PACKAGE_STRING "wireshark 1.12.1"
| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/";
| #define PACKAGE_URL "http://www.wireshark.org/";
| #define PACKAGE "wireshark"
| #define VERSION "1.12.1"
| #define VERSION_MAJOR 1
| #define VERSION_MINOR 12
| #define VERSION_MICRO 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define YYTEXT_POINTER 1
| #define HAVE_XDG_OPEN 1
| #define HTML_VIEWER "xdg-open"
| #define HAVE_NL80211 1
| #define HAVE_NL80211_CMD_SET_CHANNEL 1
| /* end confdefs.h.  */
| 
|         int foo;
| 
configure:24866: result: no
configure:25017: checking whether we can add -Wstrict-prototypes to CFLAGS
configure:25033: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition  -Wstrict-prototypes  conftest.c >&5
configure:25033: $? = 0
configure:25035: result: yes
configure:25243: checking whether we can add -Wjump-misses-init to CFLAGS
configure:25259: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes  -Wjump-misses-init  conftest.c >&5
configure:25259: $? = 0
configure:25261: result: yes
configure:25469: checking whether we can add -Wvla to CFLAGS
configure:25485: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init  -Wvla  conftest.c >&5
configure:25485: $? = 0
configure:25487: result: yes
configure:25566: checking whether we can add -Wvla to CXXFLAGS
configure:25588: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks  -Werror -Wvla  conftest.cpp >&5
configure:25588: $? = 0
configure:25590: result: yes
configure:25695: checking whether we can add -Waddress to CFLAGS
configure:25711: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla  -Waddress  conftest.c >&5
configure:25711: $? = 0
configure:25713: result: yes
configure:25792: checking whether we can add -Waddress to CXXFLAGS
configure:25814: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wvla  -Werror -Waddress  conftest.cpp >&5
configure:25814: $? = 0
configure:25816: result: yes
configure:25921: checking whether we can add -Wattributes to CFLAGS
configure:25937: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress  -Wattributes  conftest.c >&5
configure:25937: $? = 0
configure:25939: result: yes
configure:26018: checking whether we can add -Wattributes to CXXFLAGS
configure:26040: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wvla -Waddress  -Werror -Wattributes  conftest.cpp >&5
configure:26040: $? = 0
configure:26042: result: yes
configure:26147: checking whether we can add -Wdiv-by-zero to CFLAGS
configure:26163: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes  -Wdiv-by-zero  conftest.c >&5
configure:26163: $? = 0
configure:26165: result: yes
configure:26244: checking whether we can add -Wdiv-by-zero to CXXFLAGS
configure:26266: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wvla -Waddress -Wattributes  -Werror -Wdiv-by-zero  conftest.cpp >&5
configure:26266: $? = 0
configure:26268: result: yes
configure:26373: checking whether we can add -Wignored-qualifiers to CFLAGS
configure:26389: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero  -Wignored-qualifiers  conftest.c >&5
configure:26389: $? = 0
configure:26391: result: yes
configure:26470: checking whether we can add -Wignored-qualifiers to CXXFLAGS
configure:26492: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wvla -Waddress -Wattributes -Wdiv-by-zero  -Werror -Wignored-qualifiers  conftest.cpp >&5
configure:26492: $? = 0
configure:26494: result: yes
configure:26599: checking whether we can add -Wpragmas to CFLAGS
configure:26615: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers  -Wpragmas  conftest.c >&5
configure:26615: $? = 0
configure:26617: result: yes
configure:26696: checking whether we can add -Wpragmas to CXXFLAGS
configure:26718: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers  -Werror -Wpragmas  conftest.cpp >&5
configure:26718: $? = 0
configure:26720: result: yes
configure:26825: checking whether we can add -Wno-overlength-strings to CFLAGS
configure:26841: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas  -Wno-overlength-strings  conftest.c >&5
configure:26841: $? = 0
configure:26843: result: yes
configure:26922: checking whether we can add -Wno-overlength-strings to CXXFLAGS
configure:26944: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas  -Werror -Wno-overlength-strings  conftest.cpp >&5
configure:26944: $? = 0
configure:26946: result: yes
configure:27051: checking whether we can add -Wwrite-strings to CFLAGS
configure:27067: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings  -Wwrite-strings  conftest.c >&5
configure:27067: $? = 0
configure:27069: result: yes
configure:27148: checking whether we can add -Wwrite-strings to CXXFLAGS
configure:27170: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings  -Werror -Wwrite-strings  conftest.cpp >&5
configure:27170: $? = 0
configure:27172: result: yes
configure:27277: checking whether we can add -Wno-long-long to CFLAGS
configure:27293: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings  -Wno-long-long  conftest.c >&5
configure:27293: $? = 0
configure:27295: result: yes
configure:27374: checking whether we can add -Wno-long-long to CXXFLAGS
configure:27396: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings  -Werror -Wno-long-long  conftest.cpp >&5
configure:27396: $? = 0
configure:27398: result: yes
configure:27503: checking whether we can add -Wc++-compat to CFLAGS
configure:27519: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long  -Wc++-compat  conftest.c >&5
configure:27519: $? = 0
configure:27521: result: yes
configure:27729: checking whether we can add -Wheader-guard to CFLAGS
configure:27745: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long -Wc++-compat  -Wheader-guard  conftest.c >&5
cc1: error: unrecognized command line option '-Wheader-guard'
configure:27745: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.12.1"
| #define PACKAGE_STRING "wireshark 1.12.1"
| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/";
| #define PACKAGE_URL "http://www.wireshark.org/";
| #define PACKAGE "wireshark"
| #define VERSION "1.12.1"
| #define VERSION_MAJOR 1
| #define VERSION_MINOR 12
| #define VERSION_MICRO 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define YYTEXT_POINTER 1
| #define HAVE_XDG_OPEN 1
| #define HTML_VIEWER "xdg-open"
| #define HAVE_NL80211 1
| #define HAVE_NL80211_CMD_SET_CHANNEL 1
| /* end confdefs.h.  */
| 
|         int foo;
| 
configure:27804: result: no
configure:27826: checking whether we can add -Wheader-guard to CXXFLAGS
configure:27848: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long  -Werror -Wheader-guard  conftest.cpp >&5
cc1plus: error: unrecognized command line option '-Wheader-guard'
configure:27848: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.12.1"
| #define PACKAGE_STRING "wireshark 1.12.1"
| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/";
| #define PACKAGE_URL "http://www.wireshark.org/";
| #define PACKAGE "wireshark"
| #define VERSION "1.12.1"
| #define VERSION_MAJOR 1
| #define VERSION_MINOR 12
| #define VERSION_MICRO 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define YYTEXT_POINTER 1
| #define HAVE_XDG_OPEN 1
| #define HTML_VIEWER "xdg-open"
| #define HAVE_NL80211 1
| #define HAVE_NL80211_CMD_SET_CHANNEL 1
| /* end confdefs.h.  */
| 
|         int foo;
| 
configure:27899: result: no
configure:27965: checking whether we can add -Wshadow to CFLAGS
configure:27981: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long -Wc++-compat  -Wshadow  conftest.c >&5
configure:27981: $? = 0
configure:27983: result: yes
configure:27996: checking whether -Wshadow warns about variables in function declarations shadowing other variables
configure:28012: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long -Wc++-compat  -Wshadow -Werror  conftest.c >&5
configure:28012: $? = 0
configure:28014: result: no
configure:28215: checking whether we can add -Wlogical-op to CFLAGS
configure:28231: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long -Wc++-compat -Wshadow  -Wlogical-op  conftest.c >&5
configure:28231: $? = 0
configure:28233: result: yes
configure:28246: checking whether -Wlogical-op generates warnings from strchr()
configure:28271: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long -Wc++-compat -Wshadow  -Wlogical-op -Werror  conftest.c >&5
configure:28271: $? = 0
configure:28273: result: no
configure:28723: checking whether we can add -fexcess-precision=fast to CFLAGS
configure:28739: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long -Wc++-compat -Wshadow -Wlogical-op -Werror -fexcess-precision=fast  conftest.c >&5
configure:28739: $? = 0
configure:28741: result: yes
configure:28820: checking whether we can add -fexcess-precision=fast to CXXFLAGS
configure:28842: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long -Werror -fexcess-precision=fast  conftest.cpp >&5
configure:28842: $? = 0
configure:28844: result: yes
configure:28951: checking whether we can add -fvisibility=hidden to CFLAGS
configure:28967: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long -Wc++-compat -Wshadow -Wlogical-op -fexcess-precision=fast -Werror -fvisibility=hidden  conftest.c >&5
configure:28967: $? = 0
configure:28969: result: yes
configure:29048: checking whether we can add -fvisibility=hidden to CXXFLAGS
configure:29070: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long -fexcess-precision=fast -Werror -fvisibility=hidden  conftest.cpp >&5
configure:29070: $? = 0
configure:29072: result: yes
configure:29165: checking whether we can add -Wl,--as-needed to LDFLAGS
configure:29177: gcc -o conftest -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long -Wc++-compat -Wshadow -Wlogical-op -fexcess-precision=fast -fvisibility=hidden   -Wl,--as-needed conftest.c  >&5
conftest.c:33:3: warning: return type defaults to 'int' [-Wreturn-type]
conftest.c:33:3: warning: function declaration isn't a prototype [-Wstrict-prototypes]
conftest.c: In function 'main':
conftest.c:33:3: warning: old-style function definition [-Wold-style-definition]
conftest.c:33:12: warning: 'return' with no value, in function returning non-void [-Wreturn-type]
configure:29177: $? = 0
configure:29179: result: yes
configure:29229: checking whether we can add -fPIE to CFLAGS
configure:29245: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long -Wc++-compat -Wshadow -Wlogical-op -fexcess-precision=fast -fvisibility=hidden -Werror -fPIE  conftest.c >&5
configure:29245: $? = 0
configure:29247: result: yes
configure:29326: checking whether we can add -fPIE to CXXFLAGS
configure:29348: g++ -c -g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long -fexcess-precision=fast -fvisibility=hidden -Werror -fPIE  conftest.cpp >&5
configure:29348: $? = 0
configure:29350: result: yes
configure:29442: checking whether we can add -fPIE -pie to LDFLAGS
configure:29454: gcc -o conftest -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long -Wc++-compat -Wshadow -Wlogical-op -fexcess-precision=fast -fvisibility=hidden   -Wl,--as-needed -fPIE -pie conftest.c  >&5
conftest.c:33:3: warning: return type defaults to 'int' [-Wreturn-type]
conftest.c:33:3: warning: function declaration isn't a prototype [-Wstrict-prototypes]
conftest.c: In function 'main':
conftest.c:33:3: warning: old-style function definition [-Wold-style-definition]
conftest.c:33:12: warning: 'return' with no value, in function returning non-void [-Wreturn-type]
configure:29454: $? = 0
configure:29456: result: yes
configure:29514: checking whether -D_FORTIFY_SOURCE=... can be used (without generating a warning)
configure:29528: gcc -c -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long -Wc++-compat -Wshadow -Wlogical-op -fexcess-precision=fast -fvisibility=hidden -Werror  -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:29528: $? = 0
configure:29530: result: yes
configure:29556: checking whether we should treat compiler warnings as errors
configure:29579: result: no
configure:29598: checking for platform-specific compiler flags
configure:29615: result: none needed
configure:29650: checking for platform-specific linker flags
configure:29691: result: none needed
configure:29711: checking whether make supports nested variables
configure:29728: result: yes
configure:29813: checking whether to use /usr/local for headers and libraries
configure:29817: result: yes
configure:29879: checking for sed
configure:29909: result: /bin/sed
configure:29922: checking for GNU sed as first sed in PATH
configure:29925: result: yes
configure:29996: checking if profile builds must be generated
configure:30010: result: no
configure:30116: checking for pkg-config
configure:30147: result: /usr/bin/pkg-config
configure:30192: checking for Qt5Core - version >= 4.6.0
configure:30203: result: no
configure:30192: checking for QtCore - version >= 4.6.0
configure:30196: result: yes (version 4.8.1)
configure:30239: checking for Qt5Gui - version >= 4.6.0
configure:30250: result: no
configure:30239: checking for QtGui - version >= 4.6.0
configure:30243: result: yes (version 4.8.1)
configure:30288: checking for Qt5Widgets - version >= 4.6.0
configure:30299: result: no
configure:30288: checking for QtWidgets - version >= 4.6.0
configure:30299: result: no
configure:30334: checking for Qt5PrintSupport - version >= 4.6.0
configure:30345: result: no
configure:30334: checking for QtPrintSupport - version >= 4.6.0
configure:30345: result: no
configure:30383: checking for Qt5MacExtras - version >= 4.6.0
configure:30394: result: no
configure:30383: checking for QtMacExtras - version >= 4.6.0
configure:30394: result: no
configure:30467: checking for pkg-config
configure:30498: result: /usr/bin/pkg-config
configure:30520: checking for GTK+ - version >= 3.0.0
configure:30653: result: no
configure:30681: gcc -o conftest -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long -Wc++-compat -Wshadow -Wlogical-op -fexcess-precision=fast -fvisibility=hidden  -DQT_SHARED -I/usr/include/qt4 -I/usr/include/qt4/QtCore   -DQT_SHARED -I/usr/include/qt4 -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtCore    -DQT_GUI_LIB  -Wl,--as-needed -L/usr/local/lib conftest.c   >&5
conftest.c:36:21: fatal error: gtk/gtk.h: No such file or directory
compilation terminated.
configure:30681: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "wireshark"
| #define PACKAGE_TARNAME "wireshark"
| #define PACKAGE_VERSION "1.12.1"
| #define PACKAGE_STRING "wireshark 1.12.1"
| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/";
| #define PACKAGE_URL "http://www.wireshark.org/";
| #define PACKAGE "wireshark"
| #define VERSION "1.12.1"
| #define VERSION_MAJOR 1
| #define VERSION_MINOR 12
| #define VERSION_MICRO 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define YYTEXT_POINTER 1
| #define HAVE_XDG_OPEN 1
| #define HTML_VIEWER "xdg-open"
| #define HAVE_NL80211 1
| #define HAVE_NL80211_CMD_SET_CHANNEL 1
| #define _U_ __attribute__((unused))
| #define WANT_PACKET_EDITOR 1
| #define DATAFILE_DIR "/usr/local/share/wireshark"
| #define DOC_DIR "/usr/local/share/doc/wireshark"
| /* end confdefs.h.  */
| 
| #include <gtk/gtk.h>
| #include <stdio.h>
| 
| int
| main ()
| {
|  return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
|   ;
|   return 0;
| }
configure:30703: error: GTK+ 3 is not available

## ---------------- ##
## Cache variables. ##
## ---------------- ##

ac_cv_build=x86_64-unknown-linux-gnu
ac_cv_c_compiler_gnu=yes
ac_cv_cxx_compiler_gnu=yes
ac_cv_enable_usr_local=yes
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBGNUTLS_CFLAGS_set=
ac_cv_env_LIBGNUTLS_CFLAGS_value=
ac_cv_env_LIBGNUTLS_LIBS_set=
ac_cv_env_LIBGNUTLS_LIBS_value=
ac_cv_env_LIBNL1_CFLAGS_set=
ac_cv_env_LIBNL1_CFLAGS_value=
ac_cv_env_LIBNL1_LIBS_set=
ac_cv_env_LIBNL1_LIBS_value=
ac_cv_env_LIBNL2_CFLAGS_set=
ac_cv_env_LIBNL2_CFLAGS_value=
ac_cv_env_LIBNL2_LIBS_set=
ac_cv_env_LIBNL2_LIBS_value=
ac_cv_env_LIBNL3_CFLAGS_set=
ac_cv_env_LIBNL3_CFLAGS_value=
ac_cv_env_LIBNL3_LIBS_set=
ac_cv_env_LIBNL3_LIBS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=
ac_cv_env_PKG_CONFIG_PATH_value=
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_SBC_CFLAGS_set=
ac_cv_env_SBC_CFLAGS_value=
ac_cv_env_SBC_LIBS_set=
ac_cv_env_SBC_LIBS_value=
ac_cv_env_YACC_set=
ac_cv_env_YACC_value=
ac_cv_env_YFLAGS_set=
ac_cv_env_YFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_func_dlopen=no
ac_cv_func_shl_load=no
ac_cv_header_dlfcn_h=yes
ac_cv_header_inttypes_h=yes
ac_cv_header_memory_h=yes
ac_cv_header_stdc=yes
ac_cv_header_stdint_h=yes
ac_cv_header_stdlib_h=yes
ac_cv_header_string_h=yes
ac_cv_header_strings_h=yes
ac_cv_header_sys_stat_h=yes
ac_cv_header_sys_types_h=yes
ac_cv_header_unistd_h=yes
ac_cv_host=x86_64-unknown-linux-gnu
ac_cv_lib_dl_dlopen=yes
ac_cv_lib_dld_shl_load=no
ac_cv_lib_lex=-lfl
ac_cv_objext=o
ac_cv_path_DESKTOP_FILE_INSTALL=/usr/bin/desktop-file-install
ac_cv_path_EGREP='/bin/grep -E'
ac_cv_path_FGREP='/bin/grep -F'
ac_cv_path_GREP=/bin/grep
ac_cv_path_HTML_VIEWER=/usr/bin/xdg-open
ac_cv_path_LEX=/usr/bin/flex
ac_cv_path_LIBGCRYPT_CONFIG=no
ac_cv_path_PERL=/usr/bin/perl
ac_cv_path_PKG_CONFIG=/usr/bin/pkg-config
ac_cv_path_POD2HTML=/usr/bin/pod2html
ac_cv_path_POD2MAN=/usr/bin/pod2man
ac_cv_path_PYTHON=/usr/bin/python
ac_cv_path_SED=/bin/sed
ac_cv_path_XMLLINT=/usr/bin/xmllint
ac_cv_path_YACCDUMMY=/usr/bin/bison
ac_cv_path_ac_pt_PKG_CONFIG=/usr/bin/pkg-config
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AWK=mawk
ac_cv_prog_CPP='gcc -E'
ac_cv_prog_CXXCPP='g++ -E'
ac_cv_prog_HAVE_A2X=no
ac_cv_prog_HAVE_BLESS=no
ac_cv_prog_HAVE_DOXYGEN=no
ac_cv_prog_HAVE_DPKG_BUILDPACKAGE=yes
ac_cv_prog_HAVE_ELINKS=no
ac_cv_prog_HAVE_FOP=no
ac_cv_prog_HAVE_HDIUTIL=no
ac_cv_prog_HAVE_LYNX=no
ac_cv_prog_HAVE_PKGMK=no
ac_cv_prog_HAVE_PKGPROTO=no
ac_cv_prog_HAVE_PKGTRANS=no
ac_cv_prog_HAVE_W3M=no
ac_cv_prog_HAVE_XCODEBUILD=no
ac_cv_prog_HAVE_XMLLINT=yes
ac_cv_prog_HAVE_XSLTPROC=no
ac_cv_prog_LEX=flex
ac_cv_prog_YACC='bison -y'
ac_cv_prog_ac_ct_AR=ar
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_ac_ct_CXX=g++
ac_cv_prog_ac_ct_MANIFEST_TOOL=mt
ac_cv_prog_ac_ct_OBJDUMP=objdump
ac_cv_prog_ac_ct_RANLIB=ranlib
ac_cv_prog_ac_ct_STRIP=strip
ac_cv_prog_ac_cv_wireshark_have_rpm=no
ac_cv_prog_cc_c89=
ac_cv_prog_cc_g=yes
ac_cv_prog_cxx_g=yes
ac_cv_prog_lex_root=lex.yy
ac_cv_prog_lex_yytext_pointer=yes
ac_cv_prog_make_make_set=yes
ac_cv_sys_file_offset_bits=no
ac_cv_sys_largefile_CC=no
ac_cv_target=x86_64-unknown-linux-gnu
ac_cv_wireshark_have_rpm=no
am_cv_CC_dependencies_compiler_type=gcc3
am_cv_CXX_dependencies_compiler_type=gcc3
am_cv_make_support_nested_variables=yes
am_cv_prog_cc_c_o=yes
am_cv_prog_tar_ustar=gnutar
lt_cv_ar_at_file=@
lt_cv_archive_cmds_need_lc=no
lt_cv_deplibs_check_method=pass_all
lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=-ldl
lt_cv_dlopen_self=yes
lt_cv_dlopen_self_static=no
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_ld_reload_flag=-r
lt_cv_nm_interface='BSD nm'
lt_cv_objdir=.libs
lt_cv_path_LD=/usr/bin/ld
lt_cv_path_LDCXX='/usr/bin/ld -m elf_x86_64'
lt_cv_path_NM='/usr/bin/nm -B'
lt_cv_path_mainfest_tool=no
lt_cv_prog_compiler_c_o=yes
lt_cv_prog_compiler_c_o_CXX=yes
lt_cv_prog_compiler_pic='-fPIC -DPIC'
lt_cv_prog_compiler_pic_CXX='-fPIC -DPIC'
lt_cv_prog_compiler_pic_works=yes
lt_cv_prog_compiler_pic_works_CXX=yes
lt_cv_prog_compiler_rtti_exceptions=no
lt_cv_prog_compiler_static_works=yes
lt_cv_prog_compiler_static_works_CXX=yes
lt_cv_prog_gnu_ld=yes
lt_cv_prog_gnu_ldcxx=yes
lt_cv_sharedlib_from_linklib_cmd='printf %s\n'
lt_cv_shlibpath_overrides_runpath=no
lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[	 ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[	 ][	 ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'' | sed '\''/ __gnu_lto/d'\'''
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\)[ ]*$/  {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/  {"\2", (void *) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\)[ ]*$/  {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \(lib[^ ]*\)$/  {"\2", (void *) \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/  {"lib\2", (void *) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\'''
lt_cv_sys_max_cmd_len=1572864
lt_cv_to_host_file_cmd=func_convert_file_noop
lt_cv_to_tool_file_cmd=func_convert_file_noop

## ----------------- ##
## Output variables. ##
## ----------------- ##

A2X=''
ACLOCAL='${SHELL} /home/tracy/Downloads/wireshark/wireshark-1.12.1/missing aclocal-1.14'
AC_MIN_VERSION='2.60'
ADNS_LIBS=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='0'
AM_V='$(V)'
APPLICATIONSERVICES_FRAMEWORKS=''
AR='ar'
AUTOCONF='${SHELL} /home/tracy/Downloads/wireshark/wireshark-1.12.1/missing autoconf'
AUTOHEADER='${SHELL} /home/tracy/Downloads/wireshark/wireshark-1.12.1/missing autoheader'
AUTOMAKE='${SHELL} /home/tracy/Downloads/wireshark/wireshark-1.12.1/missing automake-1.14'
AWK='mawk'
CC='gcc'
CCDEPMODE='depmode=gcc3'
CC_FOR_BUILD='gcc'
CFLAGS='-g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long -Wc++-compat -Wshadow -Wlogical-op -fexcess-precision=fast -fvisibility=hidden  -DQT_SHARED -I/usr/include/qt4 -I/usr/include/qt4/QtCore   -DQT_SHARED -I/usr/include/qt4 -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtCore  '
CFLAGS_FOR_BUILD=' -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wold-style-definition -Wstrict-prototypes -Wjump-misses-init -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long -Wc++-compat -Wshadow -Wlogical-op -fexcess-precision=fast -fvisibility=hidden -fPIE'
CONFIG_ARGS=''
CONFIG_WITH_ARGS=''
COREFOUNDATION_FRAMEWORKS=''
CPP='gcc -E'
CPPFLAGS='-DQT_GUI_LIB'
CXX='g++'
CXXCPP='g++ -E'
CXXDEPMODE='depmode=gcc3'
CXXFLAGS='-g -O2 -Wall -W -Wextra -Wendif-labels -Wpointer-arith -Warray-bounds -Wformat-security -fwrapv -fno-strict-overflow -fno-delete-null-pointer-checks -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wpragmas -Wno-overlength-strings -Wwrite-strings -Wno-long-long -fexcess-precision=fast -fvisibility=hidden -fPIE  -DQT_SHARED -I/usr/include/qt4 -I/usr/include/qt4/QtCore   -DQT_SHARED -I/usr/include/qt4 -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtCore  '
CYGPATH_W='echo'
C_ARES_LIBS=''
DEFS=''
DEPDIR='.deps'
DESKTOP_FILE_INSTALL='/usr/bin/desktop-file-install'
DLLTOOL='false'
DOXYGEN=''
DSYMUTIL=''
DUMPBIN=''
DUMPCAP_GROUP=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='/bin/grep -E'
ELINKS=''
ENABLE_STATIC=''
ENABLE_STATIC_FALSE=''
ENABLE_STATIC_TRUE=''
EXEEXT=''
FGREP='/bin/grep -F'
FOP=''
GEOIP_LIBS=''
GETOPT_LO=''
GLIB_CFLAGS=''
GLIB_GENMARSHAL=''
GLIB_LIBS=''
GLIB_MIN_VERSION=''
GLIB_MKENUMS=''
GOBJECT_QUERY=''
GREP='/bin/grep'
GTK2_MIN_VERSION='2.12.0'
GTK3_MIN_VERSION='3.0.0'
GTK_CFLAGS=''
GTK_LIBS=''
GUI_CONFIGURE_FLAGS=' --with-qt'
HAVE_A2X='no'
HAVE_A2X_FALSE=''
HAVE_A2X_TRUE='#'
HAVE_BLESS='no'
HAVE_DOXYGEN='no'
HAVE_DOXYGEN_FALSE=''
HAVE_DOXYGEN_TRUE='#'
HAVE_DPKG_BUILDPACKAGE='yes'
HAVE_DUMPCAP_GROUP_FALSE=''
HAVE_DUMPCAP_GROUP_TRUE=''
HAVE_ECHLD_FALSE=''
HAVE_ECHLD_TRUE=''
HAVE_ELINKS='no'
HAVE_ELINKS_FALSE=''
HAVE_ELINKS_TRUE='#'
HAVE_FOP='no'
HAVE_FOP_FALSE=''
HAVE_FOP_TRUE='#'
HAVE_GTK_FALSE=''
HAVE_GTK_TRUE=''
HAVE_HDIUTIL='no'
HAVE_LIBLUA_FALSE=''
HAVE_LIBLUA_TRUE=''
HAVE_LIBPORTAUDIO_FALSE=''
HAVE_LIBPORTAUDIO_TRUE=''
HAVE_LIBPY_FALSE=''
HAVE_LIBPY_TRUE=''
HAVE_LYNX='no'
HAVE_LYNX_FALSE=''
HAVE_LYNX_TRUE='#'
HAVE_OSX_PACKAGING='no'
HAVE_PKGMK='no'
HAVE_PKGPROTO='no'
HAVE_PKGTRANS='no'
HAVE_PLUGINS_FALSE=''
HAVE_PLUGINS_TRUE=''
HAVE_Qt_FALSE=''
HAVE_Qt_TRUE=''
HAVE_RPM=''
HAVE_SVR4_PACKAGING='no'
HAVE_W3M='no'
HAVE_W3M_FALSE=''
HAVE_W3M_TRUE='#'
HAVE_WARNINGS_AS_ERRORS_FALSE=''
HAVE_WARNINGS_AS_ERRORS_TRUE='#'
HAVE_XCODEBUILD='no'
HAVE_XMLLINT='yes'
HAVE_XMLLINT_FALSE='#'
HAVE_XMLLINT_TRUE=''
HAVE_XSLTPROC='no'
HAVE_XSLTPROC_FALSE=''
HAVE_XSLTPROC_TRUE='#'
HTML_VIEWER='/usr/bin/xdg-open'
INET_ATON_LO=''
INET_NTOP_LO=''
INET_PTON_LO=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
KRB5_CONFIG=''
KRB5_LIBS=''
LD='/usr/bin/ld -m elf_x86_64'
LDFLAGS=' -Wl,--as-needed -L/usr/local/lib'
LDFLAGS_SHAREDLIB=''
LEX='/usr/bin/flex'
LEXLIB='-lfl'
LEX_OUTPUT_ROOT='lex.yy'
LIBCAP_LIBS=''
LIBGCRYPT_CFLAGS=''
LIBGCRYPT_CONFIG='no'
LIBGCRYPT_LIBS=''
LIBGNUTLS_CFLAGS=''
LIBGNUTLS_LIBS=''
LIBNL1_CFLAGS=''
LIBNL1_LIBS=''
LIBNL2_CFLAGS=''
LIBNL2_LIBS=''
LIBNL3_CFLAGS=''
LIBNL3_LIBS=''
LIBOBJS=''
LIBS=''
LIBSMI_CFLAGS=''
LIBSMI_LDFLAGS=''
LIBSMI_VERSION=''
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
LIBTOOL_DEPS='./ltmain.sh'
LIPO=''
LN_S='ln -s'
LTLIBOBJS=''
LUA_INCLUDES=''
LUA_LIBS=''
LYNX=''
MAKEINFO='${SHELL} /home/tracy/Downloads/wireshark/wireshark-1.12.1/missing makeinfo'
MANIFEST_TOOL=':'
MKDIR_P='/bin/mkdir -p'
MOC=''
NEED_GETOPT_LO_FALSE=''
NEED_GETOPT_LO_TRUE=''
NEED_INET_ATON_LO_FALSE=''
NEED_INET_ATON_LO_TRUE=''
NEED_INET_NTOP_LO_FALSE=''
NEED_INET_NTOP_LO_TRUE=''
NEED_INET_PTON_LO_FALSE=''
NEED_INET_PTON_LO_TRUE=''
NEED_STRNCASECMP_LO_FALSE=''
NEED_STRNCASECMP_LO_TRUE=''
NEED_STRPTIME_LO_FALSE=''
NEED_STRPTIME_LO_TRUE=''
NM='/usr/bin/nm -B'
NMEDIT=''
NSL_LIBS=''
OBJDUMP='objdump'
OBJEXT='o'
OSX_APP_FLAGS=' -qt'
OSX_DMG_FLAGS='-qt'
OSX_MIN_VERSION=''
OTOOL64=''
OTOOL=''
PACKAGE='wireshark'
PACKAGE_BUGREPORT='http://bugs.wireshark.org/'
PACKAGE_NAME='wireshark'
PACKAGE_STRING='wireshark 1.12.1'
PACKAGE_TARNAME='wireshark'
PACKAGE_URL='http://www.wireshark.org/'
PACKAGE_VERSION='1.12.1'
PATH_SEPARATOR=':'
PCAP_CONFIG=''
PCAP_LIBS=''
PERL='/usr/bin/perl'
PIE_CFLAGS='-fPIE'
PIE_LDFLAGS='-pie'
PKG_CONFIG='/usr/bin/pkg-config'
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH=''
PLUGIN_LIBS=''
POD2HTML='/usr/bin/pod2html'
POD2MAN='/usr/bin/pod2man'
PORTAUDIO_INCLUDES=''
PORTAUDIO_LIBS=''
PYTHON='/usr/bin/python'
PY_CFLAGS=''
PY_LIBS=''
QT_MIN_VERSION='4.6.0'
Qt_LIBS=' -lQtCore   -lQtGui -lQtCore  '
RANLIB='ranlib'
RPMBUILD_WITH_ARGS=''
SBC_CFLAGS=''
SBC_LIBS=''
SED='/bin/sed'
SETCAP=''
SETCAP_INSTALL_FALSE=''
SETCAP_INSTALL_TRUE=''
SETUID_INSTALL_FALSE=''
SETUID_INSTALL_TRUE=''
SET_MAKE=''
SHELL='/bin/bash'
SOCKET_LIBS=''
SSL_LIBS=''
STRIP='strip'
STRNCASECMP_LO=''
STRPTIME_C=''
STRPTIME_LO=''
SYSTEMCONFIGURATION_FRAMEWORKS=''
UIC=''
USE_PROFILE_BUILD_FALSE=''
USE_PROFILE_BUILD_TRUE='#'
VERSION='1.12.1'
W3M=''
XMLLINT='/usr/bin/xmllint'
XSLTPROC=''
YACC='bison -y'
YACCDUMMY='/usr/bin/bison'
YFLAGS=''
ac_ct_AR='ar'
ac_ct_CC='gcc'
ac_ct_CXX='g++'
ac_ct_DUMPBIN=''
ac_cv_wireshark_have_rpm='no'
ac_ws_python_config=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE='#'
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE='#'
am__fastdepCXX_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='tar --format=ustar -chf - "$$tardir"'
am__untar='tar -xf -'
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias=''
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='unknown'
capinfos_bin=''
capinfos_man=''
captype_bin=''
captype_man=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
dftest_bin=''
dftest_man=''
docdir='/usr/local/share/doc/wireshark'
dumpcap_bin=''
dumpcap_man=''
dvidir='${docdir}'
echld_dir=''
echld_test_bin=''
editcap_bin=''
editcap_man=''
exec_prefix='NONE'
host='x86_64-unknown-linux-gnu'
host_alias=''
host_cpu='x86_64'
host_os='linux-gnu'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /home/tracy/Downloads/wireshark/wireshark-1.12.1/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mergecap_bin=''
mergecap_man=''
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
plugindir=''
prefix='NONE'
program_transform_name='s,x,x,'
psdir='${docdir}'
pythondir=''
randpkt_bin=''
randpkt_man=''
rawshark_bin=''
rawshark_man=''
reordercap_bin=''
reordercap_man=''
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target='x86_64-unknown-linux-gnu'
target_alias=''
target_cpu='x86_64'
target_os='linux-gnu'
target_vendor='unknown'
text2pcap_bin=''
text2pcap_man=''
tfshark_bin=''
tfshark_man=''
tshark_bin=''
tshark_man=''
wireshark_SUBDIRS=''
wireshark_bin=''
wireshark_man=''
wiresharkfilter_man=''

## ----------- ##
## confdefs.h. ##
## ----------- ##

/* confdefs.h */
#define PACKAGE_NAME "wireshark"
#define PACKAGE_TARNAME "wireshark"
#define PACKAGE_VERSION "1.12.1"
#define PACKAGE_STRING "wireshark 1.12.1"
#define PACKAGE_BUGREPORT "http://bugs.wireshark.org/";
#define PACKAGE_URL "http://www.wireshark.org/";
#define PACKAGE "wireshark"
#define VERSION "1.12.1"
#define VERSION_MAJOR 1
#define VERSION_MINOR 12
#define VERSION_MICRO 1
#define STDC_HEADERS 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRING_H 1
#define HAVE_MEMORY_H 1
#define HAVE_STRINGS_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_STDINT_H 1
#define HAVE_UNISTD_H 1
#define HAVE_DLFCN_H 1
#define LT_OBJDIR ".libs/"
#define YYTEXT_POINTER 1
#define HAVE_XDG_OPEN 1
#define HTML_VIEWER "xdg-open"
#define HAVE_NL80211 1
#define HAVE_NL80211_CMD_SET_CHANNEL 1
#define _U_ __attribute__((unused))
#define WANT_PACKET_EDITOR 1
#define DATAFILE_DIR "/usr/local/share/wireshark"
#define DOC_DIR "/usr/local/share/doc/wireshark"

configure: exit 1