Wireshark-dev: Re: [Wireshark-dev] How to set up the display filter?
From: Peter Wu <[email protected]>
Date: Mon, 03 Mar 2014 11:14:11 +0100
On Monday 03 March 2014 16:25:06 我想不无聊 wrote:
> I just captured WLAN packets with wireshark, I want to display the packets
> whose source address is 10.0.1.128 ,what is the display filter
> expression?thanks.

The manual page of wireshark-filter(4) has an example for this. Adapter for 
your case:

    ip.src == 10.0.1.128

If you only need packets from this IP, consider setting a capture filter.


    dumpcap -i eth0 -w capture.pcapng -f 'host 10.0.1.128'

Or if you only care about packets originating from that IP:

    dumpcap -i eth0 -w capture.pcapng -f 'src host 10.0.1.128'

(see manual page of pcap-filter(7)).

Peter