Huge thanks to our Platinum Members Endace and LiveAction,
and our Silver Member Veeam, for supporting the Wireshark Foundation and project.

Wireshark-dev: Re: [Wireshark-dev] adding IRIG time and time of day

From: "John Dill" <John.Dill@xxxxxxxxxxxxxxxxx>
Date: Sat, 2 Nov 2013 19:36:02 -0400
>Date: Fri, 1 Nov 2013 14:18:04 -0700
>From: Guy Harris <guy@xxxxxxxxxxxx>
>To: Developer support list for Wireshark <wireshark-dev@xxxxxxxxxxxxx>
>Subject: Re: [Wireshark-dev] adding IRIG time and time of day
>Message-ID: <7D6992B1-A55A-45A6-948D-117DC8C29D22@xxxxxxxxxxxx>
>Content-Type: text/plain; charset=iso-8859-1
>
>
>On Nov 1, 2013, at 1:39 PM, John Dill <John.Dill@xxxxxxxxxxxxxxxxx> wrote:
>
>> I just finished installing the latest version of wireshark 1.10.2 and was able to build it successfully for Windows 7 using the recommended procedure in the developer's guide.
>> 
>> One of the things that I'd like to tweak is to add an IRIG time of day to the list of Time Display Formats.
>
>Note that View -> Time Display Format controls the way packet time stamps are displayed, so the only formats that make sense are formats where you can >take a count of seconds and nanoseconds since January 1, 1970, 00:00:00 UTC and convert it to that format.  Nothing else is implementable.
>
>If, however, the file contains IRIG time stamps *in addition to* the packet time stamp read by Wireshark, it might be possible to have an IRIG time >stamp column, separate from the "Time" column.
>> 
>> The issue is that my packet stream is synchronized to an IRIG time code generator and would like to display the date in the following format.
>> 
>> (day) hh:mm:ss.nnnnnnnnn
>> 
>> The timestamp is populated with a time of day starting with day 1 as Jan 1 12:00:00am and wraps around at either day 365 or 366 which corresponds to >Dec 31, 11:59:59pm.  One slight issue is that the IRIG time does not capture the year, so some method will be needed to specify whether the date the >leap year. I could use a heuristic like the date from the file, or use Ctrl + Alt + 8 to cycle between leap year and non-leap year displays.
>> 
>> The data is not collected from Wireshark directly, but from an external board that uses a modified pcap driver (cpcap) that I use to stream >collected packets to file.
>
>What is the file format?  Where does it store the IRIG time stamps?

The file is NTAR (another name for pcap-ng?).  The software stores the 64-bit IRIG timestamp in the Timestamp (High)/Timestamp (Low) field of a Packet Block.  It's injected into the packet stream from a 10-nanosecond resolution clock on the capture board that is synchronized to an external IRIG-B timecode.  It's used to synchronize the time of the packet stream with ARINC 429 and MIL-STD-1553 data streams, which are also IRIG-B time coded.

IRIG-B is a time format that is simply a count of seconds since Jan 1 at midnight UTC, not from 1970.

   +---------------------------------------------------------------+
 0 |                    Block Type = 0x00000006                    |
   +---------------------------------------------------------------+
 4 |                      Block Total Length                       |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 8 |                         Interface ID                          |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
12 |                        Timestamp (High)                       |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ IRIG-B Timestamp
16 |                        Timestamp (Low)                        |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
20 |                         Captured Len                          |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
24 |                          Packet Len                           |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
28 /                                                               /
   /                          Packet Data                          /
   /          /* variable length, aligned to 32 bits */            /
   /                                                               /
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   /                                                               /
   /                      Options (variable)                       /
   /                                                               /
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |                      Block Total Length                       |
   +---------------------------------------------------------------+

Isn't the time column displayed based on the contents of Timestamp (High)/Timestamp (Low)?  I figure that adding another display option should be feasible to handle this special case.  Everything looks fine when I use the UTC time without the date, but with a date it's wrong as it displays a date in 1970.

Best regards,
John D.

<<winmail.dat>>