Wireshark-dev: Re: [Wireshark-dev] slow sip voip flow for large captures
From: Jaap Keuter <[email protected]>
Date: Fri, 03 Feb 2012 14:46:18 +0100
Hi,

Sharing this table between a dissector and a tap would probably be Bad Style, IMHO. Sending this relevant information from the dissector to the tap may be possible.
Question is how the generalize this for all types of calls.

Thanks,
Jaap


On 2012-02-03 13:44, Anders Broman wrote:
Hi,
Please put the patches in bugzilla, if possible split them in two
parts one that's ok for all types(Step 2,3,4?) of calls and one which
Implements the stuff for SIP but not for the other call types. I
think the SIP dissector keeps a table over the calls as well could
that table be shared?
Regards
Anders

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Cristian
Constantin
Sent: den 3 februari 2012 13:01
To: Developer support list for Wireshark
Subject: [Wireshark-dev] slow sip voip flow for large captures

hi!

wireshark can draw call flows for sip voip calls (accessible through
the menu Telephony/VoIP Calls).

however, when the capture is large, containing tens of thousands of
sip voip calls, wireshark becomes very slow at producing the list of
calls and the call flows.