Huge thanks to our Platinum Members Endace and LiveAction,
and our Silver Member Veeam, for supporting the Wireshark Foundation and project.
Wireshark logo

Wireshark-dev: Re: [Wireshark-dev] libtshark + scripting language support

Date Prev · Date Next · Thread Prev · Thread Next
Date Index · Thread Index · Other Months · All Mailing Lists
From: Eloy Paris <peloy@xxxxxxxxxx>
Date: Thu, 19 Aug 2010 13:53:49 -0400
Hi Mark,

On 08/19/2010 09:02 AM, Mark Landriscina wrote:


Hmmm... I think that you, Guy, and Eloy have given me good cause to
go back and rethink my approach. I really appreciate the detailed
feedback.

I'll take a closer look at your suggestion to pull together
dissection capabilities as an independent lib. If you happen to have
any notes/thoughts/past work on this sitting around and wouldn't mind
sharing, I'd certainly love to see it.
I actually think there is nothing wrong with your approach, and in fact, someone suggested that I launch tshark in Network Expect instead of (actually, perhaps "in addition to") using libwireshark services.
The reason is that building Network Expect and linking against libwireshark may be challenging for some users that don't have a lot of experience and by just launching tshark building becomes a lot easier.
I'd say that if what you have works for you, keep working on it and making it better. There are many ways to skin a cat and one is not necessarily better than the other.
I don't think this will be a problem in your case, but also keep in mind that if you use libwireshark services (link against it) then you only have one license choice for your project (GPL). If you run tshark that is considered "at arm's length" and then your license can be anything you choose. 

Cheers,

Eloy Paris.-
netexpect.org



----- Original Message -----
From: Thierry Emmanuel<Emmanuel.Thierry@xxxxxxxxxxxxxxx>
Date: Thursday, August 19, 2010 4:29 am
Subject: Re: [Wireshark-dev] libtshark + scripting language support
To: Developer support list for Wireshark<wireshark-dev@xxxxxxxxxxxxx>


Hello,

I share the same point of view than Guy.
For my current project, I have integrated Wireshark in a monitoring
probe, which permit to have a dissection without additional work, and
having a fully detailed packets capture.

I have worked very differently than you, considering Wireshark as a
library itself. If you take a look at the epan directory, you'll see
that you have all the tools you need to decode any kind of packet.

You can :
- Init the library with "epan_init" and "init_dissection" functions
- Find a dissector with "dissector_table_foreach_handle" and
"dissector_handle_get_protocol_index" functions
- Request the library to process your data against the protocol you
want with "call_dissector_only" (from layer 2 to 7, for example I
decode http or icmp packets as well)
- Access to any part of the dissected packet with the ptree and finfo
structures

I succeeded to use this by getting my packets from simple SOCK_STREAM,
SOCK_DGRAM, SOCK_RAW sockets, or from a libpcap binding (which is also
accessible from Wireshark). So this library gives per self a fully
usable interface, you just have to compile with header files located
in epan/ directory and some other in the root directory, and to link
against libwireshark.so.
So I don't think that you have simplified your work by wrapping tshark
into a new library.

But the debate is very interesting. When I registered to this list to
ask how I could use independently the dissection code, one said to me
that nobody would be able to help me because it wasn't a common use of
Wireshark. And I think that it would be a great plus to provide the
dissecting stuff as an independent library. The dissecting abilities
of Wireshark are really huge, and it would be enormous if it was
independent. It would multiply its possibilities. I have worked a bit
on this kind of use so I would be glad to give help and comments if
you opened such a project.

Best regards.


-----Original Message-----
From: wireshark-dev-bounces@xxxxxxxxxxxxx [ On Behalf Of Mark Landriscina
Sent: mercredi 18 ao�t 2010 21:37
To: wireshark-dev@xxxxxxxxxxxxx
Subject: Re: [Wireshark-dev] libtshark + scripting language support

Guy,

Only need to link to libtshark.a. No need to link to libwireshark,
etc. Tshark.c does actually contain a fair amount of other useful code
that ties all the dissection stuff nicely together. My original
approach was to just draw on libwireshark and libwiretap code directly
but found that I was simply rewriting a basic version tshark.

Reason for the named-pipe was that I wanted to launch several
instances of tshark from within Python have them doing different
things and then collect their dissections via separate data streams.
Writing the dissection data over a named pipe seemed like a clean,
painless way to do this. Additionally, I wanted a flexible way to
export the dissection data in the event that I decided to do something
else with this code such as compile libtshark as an executable
(tshark) instead of a lib. I'd still be able to have the tshark
executable export its dissection data to other applications in binary
form (as opposed to printing it out in pdml format and parsing text).


I'm still playing around with the code and different ideas, so pls
feel free to share any ideas for better approaches.

----- Original Message -----
From: wireshark-dev-request@xxxxxxxxxxxxx
Date: Wednesday, August 18, 2010 3:00 pm
Subject: Wireshark-dev Digest, Vol 51, Issue 22
To: wireshark-dev@xxxxxxxxxxxxx



Send Wireshark-dev mailing list submissions to
	wireshark-dev@xxxxxxxxxxxxx

To subscribe or unsubscribe via the World Wide Web, visit
	
or, via email, send a message with subject or body 'help' to
	wireshark-dev-request@xxxxxxxxxxxxx

You can reach the person managing the list at
	wireshark-dev-owner@xxxxxxxxxxxxx

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Wireshark-dev digest..."


Today's Topics:

    1. Wiki weirdness? (Jeff Morriss)
    2. Re: Wiki weirdness? (Bill Meier)
    3. Re: Wiki weirdness? (Gerald Combs)
    4. libtshark + scripting language support (Mark Landriscina)
    5. Re: libtshark + scripting language support (Guy Harris)
    6. Re: libtshark + scripting language support (Eloy Paris)


----------------------------------------------------------------------

Message: 1
Date: Wed, 18 Aug 2010 11:29:11 -0400
From: Jeff Morriss<jeff.morriss.ws@xxxxxxxxx>
Subject: [Wireshark-dev] Wiki weirdness?
To: Developer support list for Wireshark<wireshark-dev@xxxxxxxxxxxxx>
Message-ID:<4C6BFC47.1060207@xxxxxxxxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed


The top part of the Wiki (that has a kind of tool bar with links to



the
page's Info, etc.) has gotten "weird" for me: instead of lining up
nicely the links are in a vertical list.

It looks the same on Firefox and IE and doesn't change if I'm logged



in
or not.  Anyone else seeing this?


------------------------------

Message: 2
Date: Wed, 18 Aug 2010 11:58:06 -0400
From: Bill Meier<wmeier@xxxxxxxxxxx>
Subject: Re: [Wireshark-dev] Wiki weirdness?
To: Developer support list for Wireshark<wireshark-dev@xxxxxxxxxxxxx>
Message-ID:<4C6C030E.8000806@xxxxxxxxxxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Jeff Morriss wrote:

The top part of the Wiki (that has a kind of tool bar with links

to

the

page's Info, etc.) has gotten "weird" for me: instead of lining up



nicely the links are in a vertical list.

It looks the same on Firefox and IE and doesn't change if I'm

logged

in

or not.  Anyone else seeing this?


Yep ....



------------------------------

Message: 3
Date: Wed, 18 Aug 2010 09:01:21 -0700
From: Gerald Combs<gerald@xxxxxxxxxxxxx>
Subject: Re: [Wireshark-dev] Wiki weirdness?
To: Developer support list for Wireshark<wireshark-dev@xxxxxxxxxxxxx>
Message-ID:<4C6C03D1.3070406@xxxxxxxxxxxxx>
Content-Type: text/plain; charset=UTF-8

Bill Meier wrote:

Jeff Morriss wrote:

The top part of the Wiki (that has a kind of tool bar with links

to

the

page's Info, etc.) has gotten "weird" for me: instead of lining

up



nicely the links are in a vertical list.

It looks the same on Firefox and IE and doesn't change if I'm

logged in

or not.  Anyone else seeing this?


Yep ....


It should be fixed now. I was experimenting with caching yesterday,

and

left a bad configuration in place.


------------------------------

Message: 4
Date: Wed, 18 Aug 2010 13:34:55 -0400
From: Mark Landriscina<mlandri1@xxxxxxx>
Subject: [Wireshark-dev] libtshark + scripting language support
To: wireshark-dev@xxxxxxxxxxxxx
Message-ID:<7310dfcb3a2d.4c6be17f@xxxxxxxxxxxxxxxx>
Content-Type: text/plain; CHARSET=US-ASCII

Hi,

I'd like to contribute some work that I've done to the wireshark
community and need some advice on the best way to do this, assuming



there is interest. If not, that would be good to know as well. I
suspect that it might be best to fork this off as a separate project



vs. incorporating it directly into ongoing SVN builds.

My initial goal was to modify the tshark (command line wireshark)

and

wrap it as a Python module. I wanted to expose tshark dissections as



Python objects during packet capture or capture file processing. In



addition this, I found that it was quite easy to extend this idea a



bit more, so that other scripting languages (in additional to

Python)

could leverage the same code base. See below for details.

My motivation was that I wanted to do some work with Scapy and

needed

to access application layer protocol dissections within Python

without

re-writing all the dissection code already available in
tshark/wireshark.

This is what I have done to date (all Linux for now, but am porting

to

Windows):

a. Modified tshark code base and compiled it as a library,
libtshark.a. This is the original tshark executable, more or less,
with some notable additions. In particular, after packet dissection,



the epan dissection tree data is copied off into another tree
structure that I've defined. This t_dissect_node tree is then
serialized and written out over a named-pipe. The name of the
named-pipe is defined by the user at run-time. The code to

unserialize

the t_dissect_node tree is also part of libtshark.a. Also, I have
incorporated some additional helper code that makes tree navigation



easier. A function named 'run' is called to start tshark and accepts



as parameters tshark command line args.

b. A compiled Python shared library, _tsharkPY.so. I used SWIG to
generate the Python bindings. Hence one could take the SWIG

interface

file that I wrote for Python (tsharkPY.i) and modify for use with
other SWIG supported languages: Ruby, Java, etc.

c. tsharkPY.py is the Python module file created by SWIG, leverages

my

tsharkPY.i SWIG interface file.

All the above is based off of the most recent SVN builds and
generation of the two lib files above has been incorporated into the



existing Wireshark build process. Hence, all you have to do is run
'make' and you get libtshark.a and _tsharkPY.so. 'make install' puts



these files into your Python lib path as defined by libtool. I do

need

some help tweaking this, however. Right now, libtool wants to put
these in /usr/local/lib/python2.6/site-packages/. However, they need



to be placed in /usr/lib/python2.6/site-packages/. Any thoughts

(other

than hard coding the correct path)?

Some basic Python code to use the Python module is as follows.

import tsharkPY

#fork tshark. tshark will publish its dissections to 'tshark_pipe'
FIFO. Will read and dissect 3 packets from mycapfile.
tsharkPY.run(["python","-W", "tshark_pipe","-c","3","-r","mycapfile"])

#subscribe to 'tshark_pipe'FIFO
tsharkPY.subscribe("tshark_pipe")

packets = []

#grab packets one at a time from tshark and save them in 'packets' array
while(1):

     #get packet from "tshark_pipe" FIFO
     p = tsharkPY.get_next_packet("tshark_pipe")

     #check for closed pipe/EOF. break out of loop when detected.
     if(p is None):
         #unsubscribe from tshark_pipe FIFO. cleans up FIFO file and



does some other house keeping.
         tsharkPY.unsubscribe("tshark_pipe")
         break

     #create protocol set, array, and dictionary objects and make

them

part of t_dissect_node object
     p.create_protocol_containers()

     #create dictionary containing field names of all the nodes in

the

packet tree that has 'p' as its root.
     p.create_node_dict()

     #append t_dissect_node object to 'packets' array
     packets.append(p)


print "Protocol sets: unordered list of protocols found in packet."
for packet in packets:                          #iterate over array

of

t_dissect_node trees. Each tree is one packet's worth of data.
     for proto in packet.protocol_set:           #iterate over each
protocol name (string) in t_dissect_tree's protocol set object.
         print proto,                            #print protocol name
     print                                       #print extra line




print "\nProtocol array: ordered array of protocol-level
t_dissect_node references."
for packet in packets:                          #iterate over array

of

t_dissect_node trees. Each tree is one packet's worth of data.
     for node in packet.protocol_array:          #iterate over
t_dissect_node object references in packet's protocol array.
         if node.field_name is not None:         #if node.field_name



exists (is not NULL), print value
             print node.field_name,
     print

print "\nProtocol dictionary: hash table indexed by protocol name.
provides access to t_dissect_node references for protocol level

nodes

in dissection tree."
for packet in packets:
#iterate over array of t_dissect_node trees. Each tree is one

packet's

worth of data.
     d_keys = packet.protocol_dict.keys()

#dump

key list for packet's protocol_dict object
     for k in d_keys:
#iterate over key valus
         node = packet.protocol_dict[k]                          #get



reference to each protocol level node in series
         if node is not None and node.field_name is not None:    #if



successful in retrieving node using current key, print node's field_name
             print node.field_name,
     print

print "\nPacket debug print"
for packet in packets:                          #iterate over array

of

t_dissect_node trees. Each tree is one packet's worth of data.
     packet.print_tree()                         #print

t_dissect_node

tree info for current packet

print "\nPacket data as Python char list."
for packet in packets:
#iterate over array of t_dissect_node trees. Each tree is one

packet's

worth of data.
     try:
         p = packet.first_child.next.last_child

#find

a node in tree that probably has data
         data_list = p.binary_blob                               #get



node data as a list of chars
         print data_list

#print

list

     except:
         pass
#ignore any exceptions thrown from above code

print "\nNode dictionary: dictionary that hashes all nodes in node
tree by their field names (if defined). If duplicate field_names
exist, only the first one encountered is added."
for packet in packets:                          #iterate over array

of

t_dissect_node trees. Each tree is one packet's worth of data.
     d_keys = packet.node_dict.keys()            #dump key list
     for k in d_keys:                            #iterate over key list
         print k,                                #print each key
     print "\n"

print "\nFind node by its field name. Looking for 'ip.dst_host' in
second packet"
node = packets[1].node_dict['ip.dst_host']



  #find node in second packet that has its field_name param set to 'ip.dst_host'.
if (node is not None):
     print node.field_name+" found! Showname is '"+node.showname+"'"



  #if found, print some stuff from t_dissect_node structure
print



------------------------------

Message: 5
Date: Wed, 18 Aug 2010 11:05:37 -0700
From: Guy Harris<guy@xxxxxxxxxxxx>
Subject: Re: [Wireshark-dev] libtshark + scripting language support
To: Developer support list for Wireshark<wireshark-dev@xxxxxxxxxxxxx>
Message-ID:<B766DD58-4AA7-42FE-8CF9-5B36656FFAF9@xxxxxxxxxxxx>
Content-Type: text/plain; charset=us-ascii


On Aug 18, 2010, at 10:34 AM, Mark Landriscina wrote:


I'd like to contribute some work that I've done to the wireshark

community and need some advice on the best way to do this, assuming



there is interest. If not, that would be good to know as well. I
suspect that it might be best to fork this off as a separate project



vs. incorporating it directly into ongoing SVN builds.


My initial goal was to modify the tshark (command line wireshark)



and wrap it as a Python module. I wanted to expose tshark

dissections

as Python objects during packet capture or capture file processing.

In

addition this, I found that it was quite easy to extend this idea a



bit more, so that other scripting languages (in additional to

Python)

could leverage the same code base. See below for details.


My motivation was that I wanted to do some work with Scapy and

needed to access application layer protocol dissections within

Python

without re-writing all the dissection code already available in
tshark/wireshark.


This is what I have done to date (all Linux for now,


...which hopefully really means "all UN*X for now", so that it

largely

Just Works on Solaris, *BSD, Mac OS X, HP-UX, etc.


but am porting to Windows):

a. Modified tshark code base and compiled it as a library,

libtshark.a. This is the original tshark executable, more or less,
with some notable additions. In particular, after packet dissection,



the epan dissection tree data is copied off into another tree
structure that I've defined.

The tshark executable image, by default, actually contains no code

to

parse packets or to read capture files; it's linked with two
dynamically linked libraries, libwireshark (which contains all the
dissection code) and libwiretap (which contains all the capture-file



reading code).

What code other than that code is in your libtshark.a?  Or does
anything linked with libtshark.a also have to be linked with
libwireshark and libwiretap?


This t_dissect_node tree is then serialized and written out over a



named-pipe. The name of the named-pipe is defined by the user at
run-time. The code to unserialize the t_dissect_node tree is also

part

of libtshark.a.

So what's the reason for the named pipe?


------------------------------

Message: 6
Date: Wed, 18 Aug 2010 14:22:22 -0400
From: Eloy Paris<peloy@xxxxxxxxxx>
Subject: Re: [Wireshark-dev] libtshark + scripting language support
To: Developer support list for Wireshark<wireshark-dev@xxxxxxxxxxxxx>
Message-ID:<4C6C24DE.3090309@xxxxxxxxxx>
Content-Type: text/plain; charset=UTF-8; format=flowed

Hi Mark,

On 08/18/2010 01:34 PM, Mark Landriscina wrote:

[...]


My motivation was that I wanted to do some work with Scapy and needed
to access application layer protocol dissections within Python
without re-writing all the dissection code already available in
tshark/wireshark.


I am not a Python guy but my understanding is that there is Python
support in Wireshark trunk (perhaps in 1.4.x). Did you look into

that


and determined that it wasn't good enough for what you need? Just curious.


a. Modified tshark code base and compiled it as a library,
libtshark.a. This is the original tshark executable, more or less,
with some notable additions. In particular, after packet dissection,
the epan dissection tree data is copied off into another tree
structure that I've defined. This t_dissect_node tree is then
serialized and written out over a named-pipe. The name of the
named-pipe is defined by the user at run-time. The code to
unserialize the t_dissect_node tree is also part of libtshark.a.
Also, I have incorporated some additional helper code that makes tree
navigation easier. A function named 'run' is called to start tshark
and accepts as parameters tshark command line args.


Any reason you chose to integrate tshark instead of libwireshark,
which
is what does all the dissection work, as Guy mentioned? I would

guess


that it is because it is easier to execute tshark than to fully
integrate libwireshark, but then I don't understand why you need to



make
tshark a library instead of just executing it from within Python.

I actually had a similar need and my approach was to interface with



libwireshark. You can check out my work at

Cheers,

Eloy Paris.-
netexpect.org


------------------------------

_______________________________________________
Wireshark-dev mailing list
Wireshark-dev@xxxxxxxxxxxxx



End of Wireshark-dev Digest, Vol 51, Issue 22
*********************************************

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list<wireshark-dev@xxxxxxxxxxxxx>
Archives:
Unsubscribe:

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list<wireshark-dev@xxxxxxxxxxxxx>
Archives:
Unsubscribe:


___________________________________________________________________________
Sent via:    Wireshark-dev mailing list<wireshark-dev@xxxxxxxxxxxxx>
Archives:    http://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
              mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe
Wireshark logo footer

© Wireshark Foundation · Privacy Policy

Facebook·Mastodon·Twitter·YouTube