Huge thanks to our Platinum Members Endace and LiveAction,
and our Silver Member Veeam, for supporting the Wireshark Foundation and project.

Wireshark-dev: Re: [Wireshark-dev] Problem setting up development-environment forV1.0.5

From: "Tobias Erichsen" <t.erichsen@xxxxxx>
Date: Fri, 06 Feb 2009 11:54:29 +0100
Yes, I did...

it looks like some component in the tool-chain does not correctly
cope with the long filename of the glib library...

Tobias

-------- Original-Nachricht --------
> Datum: Fri, 6 Feb 2009 10:08:41 +0100
> Von: "Anders Broman" <anders.broman@xxxxxxxxxxxx>
> An: "Developer support list for Wireshark" <wireshark-dev@xxxxxxxxxxxxx>
> Betreff: Re: [Wireshark-dev] Problem setting up development-environment	forV1.0.5

> Hi,
> Have you run "nmake -f makefile.nmake verify_tools"?
> /Anders 
> 
> -----Original Message-----
> From: wireshark-dev-bounces@xxxxxxxxxxxxx
> [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of Tobias Erichsen
> Sent: den 6 februari 2009 10:04
> To: wireshark-dev@xxxxxxxxxxxxx
> Subject: [Wireshark-dev] Problem setting up development-environment
> forV1.0.5
> 
> Hi everyone,
> 
> after not having done development for Wireshark for quite some time, I was
> trying to set up a new development environment for the 1.0.5 release using
> WinXP, Cygwin and VC6.0.
> 
> When starting the Nmake -f Makefile.nmake setup, I get a problem at the
> point when the glib-2.14.6-2.zip should be unpacked.  I get the following
> error:
> 
> File `glib-2.14.6-2.zip' already there; not retrieving.
> 
>  into D:\dev\private\WIRESH~3/glib/glib-2.14.6-2.zip
> .ZIP.or D:\dev\private\WIRESH~3/glib-2.14.6-2.zip~3/glib-2.14.6-2.zip
> 
> ERROR: Couldn't unpack D:\dev\private\WIRESH~3/glib-2.14.6-2.zip
> 
> NMAKE : fatal error U1077: 'bash' : Rueckgabe-Code '0x1'
> Stop.
> 
> 
> Could anyone give me a clue what goes wrong at that point?
> 
> Best regards,
> Tobias
> --
> Jetzt 1 Monat kostenlos! GMX FreeDSL - Telefonanschluss + DSL f�r nur
> 17,95 Euro/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a
> ___________________________________________________________________________
> Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
> Archives:    http://www.wireshark.org/lists/wireshark-dev
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>             
> mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe
> ___________________________________________________________________________
> Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
> Archives:    http://www.wireshark.org/lists/wireshark-dev
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>             
> mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe

-- 
Psssst! Schon vom neuen GMX MultiMessenger geh�rt? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger01