Huge thanks to our Platinum Members Endace and LiveAction,
and our Silver Member Veeam, for supporting the Wireshark Foundation and project.

Wireshark-dev: Re: [Wireshark-dev] sed related error while building wireshark (0.99.7 version)

From: "khushbu thakkar" <thakkar.khushbu@xxxxxxxxx>
Date: Sat, 5 Jan 2008 17:06:40 +0530
Thank You,
 
         I could rectify the mistake... actually the win32-libs folder had access problem.. so i again ran "nmake -f Makefile.nmake setup " and gave build... so now its going on...
 
but thanx anyways for response
 
Regards,
Khushbu

 
On 1/5/08, Pascal Heude <pascalheude@xxxxxxxxxxx> wrote:
    Hi,

 First of all, you should verify that you have installed the correct version of sed :
    - open a command
    - go to wireshark home directory
    - type "Nmake –f Makefile.nmake verify_tools" assuming that all the tools are in your path
 The result of is this command should look like :
        cl: /cygdrive/c/Programme/Microsoft Visual Studio 8/VC/BIN/cl
        link: /cygdrive/c/Programme/Microsoft Visual Studio 8/VC/BIN/link
        nmake: /cygdrive/c/Programme/Microsoft Visual Studio 8/VC/BIN/nmake
        bash: /usr/bin/bash
        bison: /usr/bin/bison
        flex: /usr/bin/flex
        env: /usr/bin/env
        grep: /usr/bin/grep
        /usr/bin/find: /usr/bin/find
        perl: /usr/bin/perl
        env: /usr/bin/env
        C:/python24/python.exe: /cygdrive/c/python24/python.exe
        sed: /usr/bin/sed
        unzip: /usr/bin/unzip
        wget: /usr/bin/wget

    Pascal


khushbu thakkar a écrit :
Hello Vikas,
I m getting the same build errors as u mentioned. Can u please elaborate how did u rectified the error to build wireshark successfully.
Thanxs in Advance,
Reply Soon,
Khushbu
 
On 12/26/07, Vikas Jain <jain_vikas@xxxxxxxxxxx > wrote:
I was not pointing to the correct sed program in my environment settings. After I rectified that, I was able to build the wireshark successfully.

Thanks,
Vikas




From: jain_vikas@xxxxxxxxxxx
To: wireshark-dev@xxxxxxxxxxxxx
Date: Wed, 26 Dec 2007 05:01:37 +0000
Subject: [Wireshark-dev] sed related error while building wireshark (0.99.7 version)


Hi,

I am setting up the environment on my Windows machine to build Wireshark. I am following instructions as per
section 2.2 of the developer's guide. All the tool installation looks good and the tool verification by the nmake
also looks good. I have downloaded the sources for 0.99.7 version locally onto my machine.

However, when I kick-start the build for wireshark using "nmake -f Makefile.nmake all", I get the following error:

=====================================

C:\wireshark-0.99.7>nmake -f Makefile.nmake all
Microsoft (R) Program Maintenance Utility Version 8.00.50727.42
Copyright (C) Microsoft Corporation. All rights reserved.
"C:\Program Files\Microsoft Visual Studio 8\VC\BIN\nmake.exe" /
-f Makefile.nmake WIN32_SETUP_OPT=--libverify process_libs
Microsoft (R) Program Maintenance Utility Version 8.00.50727.42
Copyright (C) Microsoft Corporation. All rights reserved.
if not exist C:\wireshark-win32-libs md C:\wireshark-win32-libs
Wireshark is ready to build.
sed -e s/@VERSION@/0.99.7a/ -e "s/@HAVE_GNU_ADNS@/#define HAVE_GNU_ADNS
1/" -e " s/@HAVE_PCRE@/#define HAVE_LIBPCRE 1/" -e "s/@HAVE_KFW@/#define HAVE_
MIT_KERBEROS 1/" -e " s/@HAVE_NETTLE@//" -e " s/@HAVE_LIBZ@/#define HAVE_LIBZ 1/
" -e "s/@HAVE_LIBPCAP@/#define HAVE_LIBPCAP 1/" -e " s/@HAVE_PCAP_FINDALLDEVS@/
#define HAVE_PCAP_FINDALLDEVS 1/" -e " s/@HAVE_PCAP_DATALINK_NAME_TO_VAL@/#defin
e HAVE_PCAP_DATALINK_NAME_TO_VAL 1/" -e " s/@HAVE_PCAP_DATALINK_VAL_TO_NAME@/#de
fine HAVE_PCAP_DATALINK_VAL_TO_NAME 1/" -e "s/@HAVE_PCAP_BREAKLOOP@// " -e "s/@
HAVE_LIBWIRESHARKDLL@/#define HAVE_LIBWIRESHARKDLL 1/" -e "s/@WPCAP_CONSTIFIED @
/#define WPCAP_CONSTIFIED 1/" -e "s/@HAVE_LIBGNUTLS@/#define HAVE_LIBGNUTLS 1/"
-e "s/@HAVE_LIBGCRYPT@/#define HAVE_LIBGCRYPT 1/" -e " s/@HAVE_LUA@/#define HA
VE_LUA 1/" -e "s/@HAVE_LUA_5_1@/#define HAVE_LUA_5_1 1/" -e " s/@HAVE_AIRPCAP@/
#define HAVE_AIRPCAP 1/" -e " s/@HAVE_AIRPDCAP@/#define HAVE_AIRPDCAP 1/" -e "s
/@HAVE_LIBPORTAUDIO@/#define HAVE_LIBPORTAUDIO 1/" -e " s/@PORTAUDIO_API_1@//"
-e "s/@HAVE_SMI@/#define HAVE_LIBSMI 1/" < config.h.win32 > config.h
sed: Unterminated `s' command
NMAKE : fatal error U1077: 'sed' : return code '0x1'
Stop.
=============================================

Any ideas if I am missing something? Any help would be appreciated.


Thanks,
Vikas




Post free auto ads on Yello Classifieds now! Try it now!


It's about getting married. Click here! Try it!

_______________________________________________
Wireshark-dev mailing list
Wireshark-dev@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-dev



_______________________________________________ Wireshark-dev mailing list Wireshark-dev@xxxxxxxxxxxxx http://www.wireshark.org/mailman/listinfo/wireshark-dev



Téléchargez gratuitement Messenger 2008

_______________________________________________
Wireshark-dev mailing list
Wireshark-dev@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-dev