Wireshark-dev: Re: [Wireshark-dev] Missing Interface Name on Windows Vista forwireshark
Date: Thu, 8 Nov 2007 05:11:20 -0800 (PST)
Hi ,
I have attached the ipconfig -a output. 
Sorry its in Norwegian but the `PPP-kort Nokia 6680 GGSN PH3` is not displayed at all.

Can anyone trace on a interface that is not listed by wireshark I mean using a MAC address or something ?
Can wireshark display hidden interfaces ?

Microsoft Windows [Versjon 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. Med enerett.

C:\Users\yngve>ipconfig /all

Windows IP-konfigurasjon

   Vertsnavn   . . . . . . . . . . . : yngve-laptop
   Primær DNS-suffiks  . . . . . . . :
   Nodetype  . . . . . . . . . . . . : Hybrid
   IP-ruting aktivert  . . . . . . . : Nei
   WINS Proxy aktivert . . . . . . . : Nei

PPP-kort Nokia 6680 GGSN PH3:

   Tilkoblingsspesifikt DNS-suffiks  :
   Beskrivelse   . . . . . . . . . . : Nokia 6680 GGSN PH3
   Fysisk adresse  . . . . . . . . . :
   DHCP aktivert . . . . . . . . . . : Nei
   Automatisk konfigurasjon aktivert : Ja
   IPv4-adresse. . . . . . . . . . . : 10.59.20.219(Foretrukket)
   Nettverksmaske . . . . . . . . . .: 255.255.255.255
   Standard gateway . . . . . . . . .: 0.0.0.0
   DNS-servere . . . . . . . . . . . : 172.28.225.11
                                       172.28.225.11
   NetBIOS over Tcpip. . . . . . . . : Deaktivert

Ethernet-kort Lokal tilkobling* 7:

   Medietilstand . . . . . . . . . . : Medium frakoblet
   Tilkoblingsspesifikt DNS-suffiks  :
   Beskrivelse   . . . . . . . . . . : Check Point Virtual Network Adapter For
ecureClient
   Fysisk adresse  . . . . . . . . . : 54-18-B8-39-0E-0E
   DHCP aktivert . . . . . . . . . . : Ja
   Automatisk konfigurasjon aktivert : Ja

Trådløst LAN-kort Trådløs nettverkstilkobling:

   Medietilstand . . . . . . . . . . : Medium frakoblet
   Tilkoblingsspesifikt DNS-suffiks  : domain.actdsltmp
   Beskrivelse   . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Network Co
nection
   Fysisk adresse  . . . . . . . . . : 00-1B-77-B5-C7-61
   DHCP aktivert . . . . . . . . . . : Ja
   Automatisk konfigurasjon aktivert : Ja

Ethernet-kort Lokal tilkobling:

   Medietilstand . . . . . . . . . . : Medium frakoblet
   Tilkoblingsspesifikt DNS-suffiks  :
   Beskrivelse   . . . . . . . . . . : Broadcom NetLink (TM) Fast Ethernet
   Fysisk adresse  . . . . . . . . . : 00-15-C5-7E-BB-7F
   DHCP aktivert . . . . . . . . . . : Ja
   Automatisk konfigurasjon aktivert : Ja

Tunnelkort Lokal tilkobling*:

   Medietilstand . . . . . . . . . . : Medium frakoblet
   Tilkoblingsspesifikt DNS-suffiks  :
   Beskrivelse   . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Fysisk adresse  . . . . . . . . . : 02-00-54-55-4E-01
   DHCP aktivert . . . . . . . . . . : Nei
   Automatisk konfigurasjon aktivert : Ja

Tunnelkort Lokal tilkobling* 9:

   Medietilstand . . . . . . . . . . : Medium frakoblet
   Tilkoblingsspesifikt DNS-suffiks  :
   Beskrivelse   . . . . . . . . . . : 6TO4 Adapter
   Fysisk adresse  . . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP aktivert . . . . . . . . . . : Nei
   Automatisk konfigurasjon aktivert : Ja

Tunnelkort Lokal tilkobling* 10:

   Medietilstand . . . . . . . . . . : Medium frakoblet
   Tilkoblingsspesifikt DNS-suffiks  :
   Beskrivelse   . . . . . . . . . . : 6TO4 Adapter
   Fysisk adresse  . . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP aktivert . . . . . . . . . . : Nei
   Automatisk konfigurasjon aktivert : Ja

C:\Users\yngve>


Regards,
Sameer


----- Original Message ----
From: Gianluca Varenni <[email protected]>
To: Developer support list for Wireshark <[email protected]>
Sent: Wednesday, November 7, 2007 4:16:38 PM
Subject: Re: [Wireshark-dev] Missing Interface Name on Windows Vista forwireshark

I think that those interfaces are exported as dialup connections. Under 
Vista WinPcap does *not* support dialup-like interfaces.

Can you please post the output of ipconfig -a?

Thanks
GV


----- Original Message ----- 
From: <[email protected]>
To: <[email protected]>
Sent: Wednesday, November 07, 2007 5:32 AM
Subject: [Wireshark-dev] Missing Interface Name on Windows Vista 
forwireshark


> Hi,
>
> I intend to use Wireshark to capture packets on a network interface that 
> is basically a USB connected mobile device, the latter acts as a modem. 
> The Operating System I am using is Windows Vista.
>
> When I open the Wireshark Capture option it does not list the network 
> interface connected to the Mobile device and hence I cannot capture any 
> packets on that specific interface.
>
> When I do an ipconfig –a option on the Command prompt I can see a IP 
> address allocated to my workstation with some other requisite entries. I 
> can even browse through on the web whilst connected through the modem..
>
> Can someone suggest a way in which I can see the network Interface in my 
> capture Screen of wireshark on Windows Vista?
>
> Has anyone else encountered this problem earlier or have I missed out on 
> anything?
>
> This problem definitely does not arise when using Wireshark on Windows XP.
> I have encountered this problem using 2 different mobile devices Samsung 
> and Nokia.
>
>
> Regards,
> Sameer
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> _______________________________________________
> Wireshark-dev mailing list
> [email protected]
> http://www.wireshark.org/mailman/listinfo/wireshark-dev 

_______________________________________________
Wireshark-dev mailing list
[email protected]
http://www.wireshark.org/mailman/listinfo/wireshark-dev

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com