Wireshark-dev: Re: [Wireshark-dev] 0.99.6 build problems on Windows
From: "Michael Lum" <[email protected]>
Date: Wed, 10 Oct 2007 07:23:50 +0800
Hi Anders,

I performed the following:

nmake -f Makefile.nmake clean
nmake -f Makefile.nmake distclean
nmake -f Makefile.nmake clean_setup
nmake -f Makefile.nmake setup
nmake -f Makefile.nmake all

but with the same result as before. ;(
No luck.

--
Michael Lum                   Principal Software Engineer
4600 Jacombs Road             +1.604.276.0055
Richmond, B.C.
Canada V6V 3B1
UTStarcom Canada, Inc.
CDMA Division
 

> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of 
> Anders Broman
> Sent: October 8, 2007 8:20 AM
> To: 'Developer support list for Wireshark'
> Subject: Re: [Wireshark-dev] 0.99.6 build problems on Windows
> 
> Hi,
> Could the problem be that "old" gtk stuff is left?
> Try the setup_clen target then setup then build.
> Best regards
> Anders
> 
> -----Ursprungligt meddelande-----
> Från: [email protected]
> [mailto:[email protected]] För 
> [email protected]
> Skickat: den 8 oktober 2007 16:58
> Till: [email protected]
> Ämne: Re: [Wireshark-dev] 0.99.6 build problems on Windows
> 
> Sorry, but I came into this thread somewhere in the middle.  
> I didn't see the original build output where your build stops.
> 
> If you have MS VC++ 6.0 installed, you don't need the SDK!!!
> I have been building Ethereal/Wireshark for several years now 
> with the same MSVC installation!!
> 
> The only thing I've changed is the CYGWIN & 
> WIRESHARK-WIN32-LIBS versions.  I know when I changed from 
> 99.2 to 99.6 that there were new versions of CYGWIN tools & 
> WIN32-LIBS required.  I also updated Python to v2.4.
> 
> Over the next couple days, I'll rebuild my CYGWIN & 
> WIRESHARK-WIN32-LIBS environment.  I know there were a couple 
> libraries that I couldn't use the latest.
> 
>  
>  
> - Tim
> 
> 
> > -----Original Message-----
> > From: [email protected]
> > [mailto:[email protected]] On Behalf Of Gianluca 
> > Varenni
> > Sent: Friday, October 05, 2007 7:26 PM
> > To: Developer support list for Wireshark
> > Subject: Re: [Wireshark-dev] 0.99.6 build problems on Windows
> > 
> > You can still find the last Platform SDK that integrates 
> with Visual 
> > Studio
> > 6 here
> > 
> > http://www.microsoft.com/msdownload/platformsdk/sdkupdate/psdk
> > -full.htm
> > 
> > Have a nice day
> > GV
> > 
> > 
> > 
> > ----- Original Message -----
> > From: "Michael Lum" <[email protected]>
> > To: "Developer support list for Wireshark" 
> > <[email protected]>
> > Sent: Friday, October 05, 2007 3:40 PM
> > Subject: Re: [Wireshark-dev] 0.99.6 build problems on Windows
> > 
> > 
> > >I updated my cygwin installation but that didn't help.
> > >
> > > I followed the link for the MS Platform SDK but it states
> > VC 6.0 is not
> > > supported:
> > >
> > > Development Tools. To build the C/C++ samples, you must 
> have a C/C++ 
> > > compiler. If you are using Microsoft Visual C/C++(r), run
> > it at least
> > > once before installing the SDK. This will ensure that the
> > environment
> > > variables are correctly configured. To build the Visual
> > Basic samples,
> > > you must have Microsoft Visual Basic(r). This SDK does 
> not support 
> > > working with Microsoft Visual C/C++(r), 6.0 as support for
> > VC 6.0 has
> > > ended. The last SDK that will work with VC 6.0 is the 
> February 2003 
> > > Edition, you can order a CD on the fulfillment site. Side by side 
> > > installations are not supported.
> > >
> > > So unfortunately I'm still stuck.
> > > I have tried, clean, distclean, setup, all, again but to no avail.
> > >
> > > Thanks.
> > >
> > > --
> > > Michael Lum                   Principal Software Engineer
> > > 4600 Jacombs Road             +1.604.276.0055
> > > Richmond, B.C.
> > > Canada V6V 3B1
> > > UTStarcom Canada, Inc.
> > > CDMA Division
> > >
> > >
> > >> -----Original Message-----
> > >> From: [email protected]
> > >> [mailto:[email protected]] On Behalf Of Graham 
> > >> Bloice
> > >> Sent: October 5, 2007 2:52 AM
> > >> To: Developer support list for Wireshark
> > >> Subject: Re: [Wireshark-dev] 0.99.6 build problems on Windows
> > >>
> > >> Michael Lum wrote:
> > >> > Okay, here is the INCLUDE value:
> > >> >
> > >> >
> > >> 
> > 
> INCLUDE=C:\PROGRA~1\MICROS~3\VC98\ATL\INCLUDE;C:\PROGRA~1\MICROS~3\VC9
> > >> > 8\
> > >> > INCLUDE;C:\PROGRA~1\MICROS~3\V
> > >> >
> > >> 
> > 
> C98\MFC\INCLUDE;C:\PROGRA~1\MICROS~3\VC98\ATL\INCLUDE;C:\PROGRA~1\MICR
> > >> > OS
> > >> > ~3\VC98\INCLUDE;C:\PROGRA~1\MI
> > >> >
> > >> 
> > 
> CROS~3\VC98\MFC\INCLUDE;C:\PROGRA~1\MICROS~3\VC98\ATL\INCLUDE;C:\PROGR
> > >> > A~
> > >> > 1\MICROS~3\VC98\INCLUDE;C:\PRO
> > >> > GRA~1\MICROS~3\VC98\MFC\INCLUDE;
> > >> >
> > >> >
> > >> That just seems to have the standard VC6 includes, replicated
> > >> 3 times for good measure!  There is no sign of the SDK
> > includes there.
> > >> > Has the way you setup your environment changed since 0.99.4?
> > >> > Everything builds with 0.99.4.
> > >> >
> > >> > Thanks
> > >> >
> > >> >
> > >> Personally, when I used VC6 I always built with the SDK
> > includes.  The
> > >> VC6 toolchain and standard includes were so old it was 
> essential, 
> > >> certainly for my day job.  However, I see the Developers Guide 
> > >> claims that it isn't required.  I'd be interested to know if the 
> > >> buildbot (which still uses VC6) has the SDK installed.  Maybe 
> > >> Gerald can comment.
> > >>
> > >> There have been a number of changes in the makefiles since
> > >> 0.99.4 so that might account for your difficulties.
> > >>
> > >> --
> > >> Regards,
> > >>
> > >> Graham Bloice
> > >>
> > >> _______________________________________________
> > >> Wireshark-dev mailing list
> > >> [email protected]
> > >> http://www.wireshark.org/mailman/listinfo/wireshark-dev
> > >>
> > > _______________________________________________
> > > Wireshark-dev mailing list
> > > [email protected]
> > > http://www.wireshark.org/mailman/listinfo/wireshark-dev
> > 
> > _______________________________________________
> > Wireshark-dev mailing list
> > [email protected]
> > http://www.wireshark.org/mailman/listinfo/wireshark-dev
> > 
> _______________________________________________
> Wireshark-dev mailing list
> [email protected]
> http://www.wireshark.org/mailman/listinfo/wireshark-dev
> 
> _______________________________________________
> Wireshark-dev mailing list
> [email protected]
> http://www.wireshark.org/mailman/listinfo/wireshark-dev
>