Hi,
As a workaround it's also possible to do dos2unix on the tools/win32-setup.sh file.
BR
Anders
________________________________
Från: wireshark-dev-bounces@xxxxxxxxxxxxx genom Jaap Keuter
Skickat: on 2006-11-22 17:14
Till: Developer support list for Wireshark
Ämne: Re: [Wireshark-dev] (Script)-Problem building current SVN-revision of Wireshark under WindowsXP
Hi,
Read back the message threads on Bash. There were/are issues with the
latest releases. A rollback to an older one resolved that.
Thanx,
Jaap
On Wed, 22 Nov 2006, Benjamin Meyer wrote:
> Hello
>
> I would like to build an uptodate version of Wireshark.
> I checked out SVN-Revision 19955 from
> http://anonsvn.wireshark.org/wireshark/trunk to a local directory.
>
> I test the installed tools with "nmake -f Makefile.nmake
> verify_tools" and get the following result:
>
> --- snip ---
>
> C:\WireShark>nmake -f Makefile.nmake verify_tools
>
> Microsoft (R) Program Maintenance Utility Version 6.00.9782.0
> Copyright (C) Microsoft Corp 1988-1998. All rights reserved.
>
> bash tools\win32-setup.sh --appverify cl link nmake bash
> bison
> flex env grep /usr/bin/find perl env python sed
> unzip
> wget
> : command not foundh: line 2:
> : command not foundh: line 8:
> : command not foundh: line 11:
> 'ools/win32-setup.sh: line 12: syntax error near unexpected token `{
> 'ools/win32-setup.sh: line 12: `err_exit () {
> NMAKE : fatal error U1077: 'bash' : return code '0x2'
> Stop.
>
> --- snap ---
>
>
>
> The problem is:
> If I download "wireshark-0.99.4.tar" (via Download-page) and do
> "verify_tools" it works just fine and I can build Wireshark without
> any problem.
>
>
>
> --- snip ---
>
> C:\Kram\wireshark-0.99.4>nmake -f Makefile.nmake verify_tools
>
> Microsoft (R) Program Maintenance Utility Version 6.00.9782.0
> Copyright (C) Microsoft Corp 1988-1998. All rights reserved.
>
> bash tools\win32-setup.sh --appverify cl link nmake bash
> bison
> flex env grep /usr/bin/find perl env python sed
> unzip
> wget
> Checking for required applications:
> cl: /cygdrive/d/PROGRA~1/MICROS~3/VC98/BIN/cl
> link: /cygdrive/d/PROGRA~1/MICROS~3/VC98/BIN/link
> nmake: /cygdrive/d/PROGRA~1/MICROS~3/VC98/BIN/nmake
> bash: /usr/bin/bash
> bison: /usr/bin/bison
> flex: /usr/bin/flex
> env: /usr/bin/env
> grep: /usr/bin/grep
> /usr/bin/find: /usr/bin/find
> perl: /usr/bin/perl
> env: /usr/bin/env
> python: /usr/bin/python
> sed: /usr/bin/sed
> unzip: /usr/bin/unzip
> wget: /usr/bin/wget
>
> --- snap ---
>
> Any ideas what I can do? I am not familiar with this script-based
> building process.
> In cygwin the following script-versions are installed:
>
> This is perl, v5.8.7 built for cygwin-thread-multi-64int
>
> Python 2.4.3 (#1, May 18 2006, 07:40:45)
> [GCC 3.3.3 (cygwin special)] on cygwin
>
>
> Thank you for hints.
>
> Benjamin Meyer
> _______________________________________________
> Wireshark-dev mailing list
> Wireshark-dev@xxxxxxxxxxxxx
> http://www.wireshark.org/mailman/listinfo/wireshark-dev
>
>
_______________________________________________
Wireshark-dev mailing list
Wireshark-dev@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-dev
<<winmail.dat>>
