Huge thanks to our Platinum Members Endace and LiveAction,
and our Silver Member Veeam, for supporting the Wireshark Foundation and project.

Wireshark-commits: [Wireshark-commits] rev 40360: /trunk-1.4/ /trunk-1.4/epan/dissectors/: packet-h

Date: Tue, 03 Jan 2012 08:10:34 GMT
http://anonsvn.wireshark.org/viewvc/viewvc.cgi?view=rev&revision=40360

User: jake
Date: 2012/01/03 12:10 AM

Log:
 ------------------------------------------------------------------------
 r40194 | guy | 2011-12-14 03:46:16 +0100 (Wed, 14 Dec 2011) | 6 lines
 
 Put back the checks for null arguments, but report a dissector bug if
 we're given null pointers.
 
 Put in comments clarifying that some routines intentionally do *not*
 null terminate the strings they produce.
 
 ------------------------------------------------------------------------
 r40195 | guy | 2011-12-14 03:55:26 +0100 (Wed, 14 Dec 2011) | 18 lines
 
 Refer to a PID of 0x0002 as the PID for the HP Teaming heartbeat
 protocol.
 
 Point to an HP document o the protocol, and discuss the two ways to hook
 up the dissector.
 
 Don't bother checking the destination address - either the OUI/PID
 suffices, or the MAC address is both necessary and, presumably,
 sufficient and we need to introduce a heuristic dissector table for SNAP
 frames.  What's more, there's no guarantee that the destination address
 is a MAC address - it might be absent, e.g. because you're capturing on
 the Linux "any" device and are getting the "Linux cooked" header, with
 only a destination address.
 
 Don't put the source address into the Info column - it's already in the
 source column *if* it exists (which it might not, for packets captured
 from the "any" device and sent by the machine doing the capturing).
 
 ------------------------------------------------------------------------
 r40196 | guy | 2011-12-14 06:23:57 +0100 (Wed, 14 Dec 2011) | 4 lines
 
 Put back the source MAC address, but do it right, in one column_add_fstr()
 call, and using ep_address_to_str(), so it can handle any address type,
 including AT_NONE if the source address isn't available.
 
 ------------------------------------------------------------------------
 r40245 | cmaynard | 2011-12-19 18:59:34 +0100 (Mon, 19 Dec 2011) | 2 lines
 
 Tighten up conversation port matching once the 2nd port is known.  
 Fixes https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5727
 
 ------------------------------------------------------------------------
 r40266 | cmaynard | 2011-12-21 22:34:37 +0100 (Wed, 21 Dec 2011) | 2 lines
 
 Avoid a potential buffer overflow (and fix some typos).  
 Resolves bug 6391: https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=6391
 
 ------------------------------------------------------------------------
 r40275 | cmaynard | 2011-12-22 15:49:43 +0100 (Thu, 22 Dec 2011) | 4 lines
 
 What is the airspeed velocity of an unladen swallow?
 
 aspell and my own spelling preferences do not always agree with the spelling 
 variations used by folks across the pond.  Revert a couple of spelling changes.
 
 ------------------------------------------------------------------------
 r40274 | guy | 2011-12-22 10:22:35 +0100 (Thu, 22 Dec 2011) | 5 lines
 
 The encapsulation following WTAP_ENCAP_ARCNET is
 WTAP_ENCAP_ARCNET_LINUX; update various tables mapping Wiretap
 encapsulations to file-type encapsulations.  Get rid of some trailing
 "sorry, that's not supported" entries while we're at it.
 
 ------------------------------------------------------------------------
 r40280 | cmaynard | 2011-12-22 20:22:43 +0100 (Thu, 22 Dec 2011) | 2 lines
 
 Revert some of the changes made as part of the patch from bug 6194 committed 
 in r38326.  Also, change the 3 separate reserved bit fields to a single 3-bit 
 reserved field to more closely match the spec.  Lastly, in accordance with 
 NOTE 2 of Table 3-1 of the spec, display the connection id, whatever it is, 
 rather than assuming it's zero just because the Com bit isn't set.
 
 ------------------------------------------------------------------------
 r40281 | cmaynard | 2011-12-22 20:41:13 +0100 (Thu, 22 Dec 2011) | 2 lines
 
 Appease the buildbots.
 
 ------------------------------------------------------------------------
 r40304 | cmaynard | 2011-12-27 19:16:12 +0100 (Tue, 27 Dec 2011) | 2 lines
 
 From Jim Young via bug 5580: Only update the time elapsed between the previous 
 displayed packet and this packet if the packet is actually displayed.  
 Ref: https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5580
 
 ------------------------------------------------------------------------
 r40316 | gerald | 2011-12-28 21:29:13 +0100 (Wed, 28 Dec 2011) | 3 lines
 
 Add "peflags" to the list of required executables. Use it to make sure
 the DLLs we use have DEP and ASLR enabled.
 
 ------------------------------------------------------------------------
 r40317 | gerald | 2011-12-28 23:37:38 +0100 (Wed, 28 Dec 2011) | 4 lines
 
 Simplify wireshark.nsi a bit by copying DLLs from the wireshark-gtk2
 directory.  This picks up any DEP/ASLR-related changes. Run peflags on
 more DLLs.
 
 ------------------------------------------------------------------------
 r40353 | stig | 2012-01-01 11:02:11 +0100 (Sun, 01 Jan 2012) | 1 line
 
 Happy New Year!
 ------------------------------------------------------------------------
 
 
 Updated release notes.

Directory: /trunk-1.4/epan/dissectors/
  Changes    Path               Action
  +45 -25    packet-hpteam.c    Modified
  +2 -2      packet-rlc.c       Modified
  +81 -80    packet-tcp.c       Modified
  +9 -4      packet-tftp.c      Modified

Directory: /trunk-1.4/docbook/
  Changes    Path                 Action
  +30 -0     release-notes.xml    Modified

Directory: /trunk-1.4/epan/
  Changes    Path          Action
  +43 -16    to_str.c      Modified

Directory: /trunk-1.4/packaging/macosx/
  Changes    Path             Action
  +2 -2      Info.plist.in    Modified

Directory: /trunk-1.4/packaging/nsis/
  Changes    Path             Action
  +44 -47    wireshark.nsi    Modified

Directory: /trunk-1.4/
  Changes    Path              Action
  +6 -0      Makefile.nmake    Modified
  +6 -5      file.c            Modified
  +1 -1      version_info.c    Modified


(5 files not shown)