Comment # 1
on bug 10136
from Ville Ojamo
Just to clarify, it is not necessary to have () in the _expression_. The
expressions:
not host 192.0.2.44 and not port 123
not host 192.0.2.44 and not tcp port 123
Are all also mangled into:
not tcp port 123
--
After further testing it seems the displayed Capture Filter shows always
completely wrong data after capture is started, stopped and the Capture Options
dialog re-opened. After above testing trying to enter different Capture Filter
values:
not tcp port 987
host 127.0.0.1
Results in a mangled _expression_ still displaying the same _expression_ used in
previous testing and nothing anything close to the _expression_ that was entered:
not tcp port 123
The above behavior (displayed port staying at "123") persists even after
restart of Wireshark. Case:
1- start wireshark
2- set Capture Options to include Capture Filter "not host 192.0.2.99 and not
tcp port 123"
3- start capture
4- stop capture
5- open Capture Options, verify that Capture Filter is displayed as:
not tcp port 123
6- exit wireshark
7- start wireshark
8- set Capture Options to include Capture Filter "host 192.0.2.1"
9- start capture
10- stop capture
11- open Capture Options, verify that Capture Filter is displayed as:
not tcp port 123
You are receiving this mail because:
- You are watching all bug changes.
