https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=7136
Summary: HIP dissector: HIT_SUITE_LIST parameter from HIPv2
Product: Wireshark
Version: SVN
Platform: All
OS/Version: All
Status: NEW
Severity: Normal
Priority: Low
Component: Wireshark
AssignedTo: bugzilla-admin@xxxxxxxxxxxxx
ReportedBy: fvidalmeca@xxxxxxxxx
Created attachment 8258
--> https://bugs.wireshark.org/bugzilla/attachment.cgi?id=8258
HIPv2 R1 message Including a HIT_SUITE_LIST Parameter with ID 1
(RSA,DSA/SHA-256 Hit Suite)
Build Information:
Version 1.7.2 (SVN Rev 42105 from /trunk)
Copyright 1998-2012 Gerald Combs <gerald@xxxxxxxxxxxxx> and contributors.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Compiled (32-bit) with GTK+ 2.24.4, with Cairo 1.10.2, with Pango 1.28.4, with
GLib 2.28.6, with libpcap, with libz 1.2.3.4, without POSIX capabilities,
without SMI, without c-ares, without ADNS, without Lua, without Python, without
GnuTLS, without Gcrypt, without Kerberos, without GeoIP, without PortAudio,
with
AirPcap.
Running on Linux 2.6.38-13-generic, with locale en_US.UTF-8, with libpcap
version 1.1.1, with libz 1.2.3.4, without AirPcap.
Built using gcc 4.5.2.
--
The HIT_SUITE_LIST Parameter from HIPv2 (
http://tools.ietf.org/html/draft-ietf-hip-rfc5201-bis-08 ) is unsupported.
C&P from the draft:
5.2.10. HIT_SUITE_LIST
The HIT_SUITE_LIST parameter contains a list of the supported HIT
suite IDs of the Responder. The Responder sends the HIT_SUITE_LIST
in the signed part of the R1 packet. Based on the HIT_SUITE_LIST,
the Initiator can determine which source HITs are supported by the
Responder.
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ID #1 | ID #2 | ID #3 | ID #4 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ID #n | Padding |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Type 715
Length number of HIT Suite IDs
ID defines a HIT Suite ID supported by the host.
The list of IDs is ordered by preference of the
host. Each HIT Suite ID is one octet long. The four
higher-order bits of the ID field correspond to the
HIT Suite ID in the ORCHID OGA field. The four
lower-order bits are reserved and set to 0 and
ignored by the receiver.
The HIT Suite ID indexes a HIT Suite. HIT Suites are composed of
signature algorithms as defined in Section 5.2.9 and hash functions.
The ID field in the HIT_SUITE_LIST is defined as eight-bit field as
opposed to the four-bit HIT Suite ID and OGA field in the ORCHID.
This difference is a measure to accommodate larger HIT Suite IDs if
the 16 available values prove insufficient. In that case, one of the
16 values, zero, will be used to indicate that four additional bits
of the ORCHID will be used to encode the HIT Suite ID. Hence, the
current four-bit HIT Suite-IDs only use the four higher order bits in
the ID field. Future documents may define the use of the four lower-
order bits in the ID field.
The following HIT Suites ID are defined:
HIT Suite ID
RESERVED 0
RSA,DSA/SHA-256 1 (REQUIRED)
ECDSA/SHA-384 2 (RECOMMENDED)
ECDSA_LOW/SHA-1 3 (RECOMMENDED)
--
Configure bugmail: https://bugs.wireshark.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
