ANNOUNCEMENT: Live Wireshark University & Allegro Packets online APAC Wireshark Training Session
April 17th, 2024 | 14:30-16:00 SGT (UTC+8) | Online

Wireshark-bugs: [Wireshark-bugs] [Bug 4155] Unable to run Wireshark, Fault Module: MSVCR90.dll

Date: Fri, 6 Nov 2009 13:12:40 -0800 (PST)
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=4155





--- Comment #26 from Alex <arotaru@xxxxxxxxxxx>  2009-11-06 13:12:39 PDT ---
(In reply to comment #25)
> (In reply to comment #24)
> > I'm experiencing same issue, here's the requested output:
> > 
> > C:\Tools\Wireshark>dumpcap -D
> > 1. \Device\NPF_{A3879452-E40A-484E-A4D8-3F2637F713EF} ()
> 
> Can you try one of the 1.3.2-SVN-30846 (or later) installers at
> http://www.wireshark.org/download/automated/? 
> 
> Also, what kind of NIC is on your system? Its driver appears to return an empty
> description.
> 

Right here it is: the NIC reported by dumpcap or tshark is the ISATAP tunnel
intf. My NIC details below:

Ethernet adapter Marvell1:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit
Ethernet Controller
   Physical Address. . . . . . . . . : 00-22-15-##-##-##
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::####::####.....
   IPv4 Address. . . . . . . . . . . : a.b.c.h(Preferred)
   Subnet Mask . . . . . . . . . . . : w.x.y.z
   Lease Obtained. . . . . . . . . . : 06 November 2009 18:38:00
   Lease Expires . . . . . . . . . . : 09 November 2009 18:37:59
   Default Gateway . . . . . . . . . : a.b.c.d
   DHCP Server . . . . . . . . . . . : a.b.c.d
   DNS Servers . . . . . . . . . . . : a.b.c.d
   NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{A3879452-E40A-484E-A4D8-3F2637F713EF}:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Now I've tried latest development Version 1.3.2-SVN-30846 and no more MSVCR90
crashes but the only interface is still ISATAP. Can't see Marvell in wireshark
at all.
I'll add a printscreen attachment.


-- 
Configure bugmail: https://bugs.wireshark.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.