Huge thanks to our Platinum Members Endace and LiveAction,
and our Silver Member Veeam, for supporting the Wireshark Foundation and project.

Wireshark-bugs: [Wireshark-bugs] [Bug 3163] MIBS error on launch 1.0.5

Date: Sun, 1 Feb 2009 22:34:20 -0800 (PST)
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=3163





--- Comment #8 from Hans <skipmeister123@xxxxxxxxx>  2009-02-01 22:34:19 PDT ---
(In reply to comment #7)
> I had the same issue loading MIBS. I did some hunting around online, and found
> a link addressing the purpose of SNMP, MIBS, etc. It seems that the directory
> where these are stored is actually /usr/share/snmp/mibs/ , not the default path
> that the program is searching. Open the Name Resolution section under
> preferences and add the above directory to SMI (MIB and PIB) paths.
> 
> That will fix the loading error (hopefully), but like you, my interface is not
> being recognized. If I get that figured out, I'll see if I can send some info
> your way, since our systems seem to be suffering the same symptoms.
> 
> Dan
> 

Thanks Dan.  That certainly resolved one issue.  The more pressing issue now,
just as you have stated, is that the interfaces are not listed.  The program is
completely unusable until that is resolved, so I'm very curious to see what you
come up with.


-- 
Configure bugmail: https://bugs.wireshark.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.