Wireshark-bugs: [Wireshark-bugs] [Bug 2862] New: frimware should be spelled firmware
Date: Wed, 10 Sep 2008 07:16:09 -0700 (PDT)

           Summary: frimware should be spelled firmware
           Product: Wireshark
           Version: 1.0.3
          Platform: PC
        OS/Version: Windows XP
            Status: NEW
          Severity: Trivial
          Priority: Low
         Component: Wireshark
        AssignedTo: [email protected]
        ReportedBy: [email protected]

Build Information:
Version 1.0.3 (SVN Rev 26134)

Compiled with GTK+ 2.12.8, with GLib 2.14.6, with WinPcap (version unknown),
with libz 1.2.3, without POSIX capabilities, with libpcre 7.0, with SMI 0.4.8,
with ADNS, with Lua 5.1, with GnuTLS 2.3.8, with Gcrypt 1.4.1, with MIT
Kerberos, with PortAudio V19-devel, with AirPcap.

Running on Windows XP Service Pack 2, build 2600, with WinPcap version 4.0.2
(packet.dll version, based on libpcap version 0.9.5, without

Built using Microsoft Visual C++ 6.0 build 8804
When decoding an RMCP packet Frimware is displayed. It should be Firwmare.

User Datagram Protocol, Src Port: asf-rmcp (623), Dst Port: shivasound (1549)
Remote Management Control Protocol, Class: IPMI
Version: 0x06
Sequence: 0xff
Type: Normal RMCP, Class: IPMI
...0 0111 = Class: IPMI (0x07)
0... .... = Message Type: Normal RMCP (0x00)
Intelligent Platform Management Interface, NetFn: Frimware Response (0x09),
Cmd: Unknown Response (0x0
Session: ID 0x00000001 (9 bytes)
Message Length: 8
Request Address: Unknown (0x61)
NetFn/LUN: Frimware Response (0x09), LUN 0x00
0010 01.. = NetFn: Frimware Response (0x09)
.... ..00 = Request LUN: 0x00
Checksum 1: 0x7b
Response Address: BMC Slave Address (0x20)
Seq/LUN: 0x28, LUN 0x00
Command: Unknown Response (0x03)
Completion Code: Command completed normally (0x00)
Checksum 2: 0xb5

Configure bugmail: https://bugs.wireshark.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.