Wireshark · Wireshark-announce: [Wireshark-announce] Wireshark 0.99.4 is now available

[Wireshark announcements <wireshark-announce@xxxxxxxxxxxxx>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Wireshark 0.99.4 has been released.

What is Wireshark?

   Wireshark is the world's most popular network protocol analyzer.
   It is used for troubleshooting, analysis, development, and
   education.

What's New

  Bug Fixes

   The following vulnerabilities have been fixed. See the security
   advisory for details and a workaround.

     o The HTTP dissector could crash. (Bugs 1050 and 1079)
       Versions affected: 0.99.3.
       CVE-2006-5468

     o The LDAP dissector (and possibly others) could crash. (Bug
       1054)
       Versions affected: 0.99.3.
       CVE-2006-5740

     o The XOT dissector could attempt to allocate a large amount of
       memory and crash. (Bug 1133)
       Versions affected: 0.9.8 to 0.99.3.
       CVE-2006-4805

     o The WBXML dissector could crash. (Bug 1134)
       Versions affected: 0.10.11 to 0.99.3.
       CVE-2006-5469

     o The MIME Multipart dissector was susceptible to an off-by-one
       error. (Bug 1135)
       Versions affected: 0.10.1 to 0.99.3.
       CVE-2006-4574

     o If AirPcap support was enabled, parsing a WEP key could
       sometimes cause a crash.
       Versions affected: 0.99.3.

   The following bugs have been fixed:

     o The file set dialog could grow excessively large. (Bug
       331)

     o Trying to save flow data may crash Wireshark. (Bug 396)

     o It may not be possible to re-order coloring rules under
       Windows. (Bug 699)

     o Printing each packet to a new page didn't work under Windows.
       (Bug 707)

     o The personal hosts configuration file wasn't being parsed
       correctly. (Bug 795)

     o "Save as" to an existing file wasn't allowed. (Bug 927)

     o The SNMP dissector was not handling 64-bit counters properly.
       (Bug 1047)

     o Wireshark and TShark would fail to start under Windows while
       trying to acquire a crypto context. (Bug 1096)

     o The HTTP content-length field was a string instead of an
       integer. (Bug 1109)

     o Invalid characters could show up in PDML output. (Bug
       1110)

  New and Updated Features

   The following features are new (or have been significantly
   updated) since the last release:

     o AirPcap, support (which provides raw mode capture under
       Windows) has been enhanced to allow capturing on multiple
       AirPcap adapters simultaneously using the Multi-Channel
       Aggregator.

     o VoIP call playback has been enhanced. If Wireshark is linked
       with the PortAudio library, you can play back G.711
       conversations. This feature is present in the standard Windows
       installer.

     o The capture interface dialog display has been enhanced.

     o The "Save" button has been removed from the "Ok" / "Apply" /
       "Cancel" button group in the following dialogs:

          o Edit/Preferences

          o View/Coloring Rules

          o Capture/Capture Filters

          o Analyze/Display Filters

          o Analyze/Enabled Protocols

       If you're fond of the "Save" button it can be resurrected in
       the User Interface preferences.

     o Reading from stdin ("-i -") now works under Windows.

     o Expert analysis has been improved.

     o Wireshark now supports USB as a media type. If you're running
       a Linux distribution with version 2.6.11 of the kernel or
       greater and you have the usbmon module enabled and you have a
       recent CVS version of libpcap (post-0.9.5) installed you can
       also do live captures. More details can be found at the
       USB capture setup page on the wiki.

     o The number of WEP keys that the user can specify in the IEEE
       802.11 protocol preferences has been increased from 4 to 64.

  New Protocol Support

   Enea LINX, Ethernet Powerlink (v1 and v2), H.248 Q.1950 Annex A,
   Linux pktgen, MP2T, NEWMAIL, PNG, SCSI OSD, UDLD, UMTS FP, USB,
   WLCCP, WZCSVC

  Updated Protocol Support

   3Com NJACK, 802.11, ACSE, AH, ALCAP, ANSI MAP, ATM, ASN.1, BACapp,
   BER, BGP, BSSAP, Camel, Catapult DCT2000, CFlow, CLNP, Common
   Windows networking, DAP, DCERPC (DCERPC, ATSVC, DFS, EFS, EPM,
   EVENTLOG, INITSHUTDOWN, MAPI, NT, PIPE, SAMR, SPOOLSS, SRVSVC,
   SVCCTL, WINREG), DCOM (DCOM, CBA-ACCO, SYSACT), DIAMETER, DISP,
   DNS, DOP, DSP, ESP, Ethernet, FC, FCP, GSM A, GSM MAP, GSM SMS,
   GSSAPI, GTP, H.225, H.245, H.248, HTTP, ICQ, IKE, ISAKMP, iSCSI,
   ISUP, IUUP, Kerberos 4, LAP-D, LDAP, LLC, LogotypeCertExtn,
   MEGACO, MIME Multipart, MIP6, MMS, MSRP, MTP3, NCP, NDMP, NDPS,
   NFS, NTP, OSI, PER, PN-MRP, PPP, 19154Q.931, RADIUS, Redback, RPC,
   RTCP, RTP, SCCP, SCSI, SDP, SIP, SMB, SMRSE, SNMP, SSL, STANAG
   5066, STP, TCAP, TCP, TFTP, TIPC, UDP, UMA, VLAN, VNC, VRRP,
   X.509ce X11, YMSG, WTLS

  Removed Protocols

   The CISCOWL dissector has been superseded by WLCCP.

  New and Updated Capture File Support

   Catapult DCT2000, EyeSDN, iSeries

Getting Wireshark

  The source code and Windows installer can be downloaded immediately
  from http://www.wireshark.org/download/ .

   -------------------------------------------------------------------

Digests

MD5(wireshark-0.99.4.tar.gz)=2556a31d0d770dd1990bd67b98bd2f9b
SHA1(wireshark-0.99.4.tar.gz)=9c4f4bb214dad25f27e3ab346bf74701f9798f1e
RIPEMD160(wireshark-0.99.4.tar.gz)=55582d5fc92b0fd380629766610a0aee93916e5d

MD5(wireshark-0.99.4.tar.bz2)=05fada181e12bfa94b52f0b10395b28c
SHA1(wireshark-0.99.4.tar.bz2)=696216d794b418da3cb0a1829281ef65bf3e64ff
RIPEMD160(wireshark-0.99.4.tar.bz2)=6bf940af951ddfcf66157a8cb299e6342dd3f955

MD5(wireshark-setup-0.99.4.exe)=44edc28501c52c5a38e7351ea57d7873
SHA1(wireshark-setup-0.99.4.exe)=b245151b0dca0a88c65e7900ce7558ea89d29bc2
RIPEMD160(wireshark-setup-0.99.4.exe)=32710d62eed42bb8237de688736c7c688f2b8d03

MD5(patch-wireshark-0.99.3a-to-wireshark-0.99.4.diff.bz2)=25f2e9d14125c27133658c9a9dacda30
SHA1(patch-wireshark-0.99.3a-to-wireshark-0.99.4.diff.bz2)=9da137198dc6d4c32c4911f061e1ee4261ed5ff4
RIPEMD160(patch-wireshark-0.99.3a-to-wireshark-0.99.4.diff.bz2)=10d009c5c566ab584d66c32a156e6c6d487790ac

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFFR/sZpw8IXSHylJoRAtWNAJ40xXMscRdrqATfArHwC/9wgt+8NwCfY04C
Cs9oYabtLh+1o1mQC3/EcZI=
=6wJi
-----END PGP SIGNATURE-----