Wireshark · Ethereal-users: Re: [Ethereal-users] SIP decoding

["Lars Ruoff" <Lars.Ruoff@xxxxxxxxxx>]

SIP is decoded automatically if the standard ports (5060) are used.
Otherwise force to decode manually using "Decode As..." -> SIP
br,
Lars Ruoff

----- Original Message ----- 
From: "Wenz, Mark F (Mark)" <mwenz@xxxxxxxxxx>
To: <ethereal-users@xxxxxxxxxxxx>
Cc: "Wenz, Mark F (Mark)" <mwenz@xxxxxxxxxx>
Sent: Tuesday, April 04, 2006 8:28 PM
Subject: [Ethereal-users] SIP decoding


> Support,
> I captured SIP traces using ' tcpdump ip proto 17'  (attached is the
file).  I see the UDP and inside, the data. The raw data shows the SIP info,
but how do you see the SIP data decoded in the tree?  Using version 0.10.13.
>
> Thanks,
>
> Mark Wenz
> Lucent Technologies
> UMTS MSC DFS
> (630)224-8642
> mwenz@xxxxxxxxxx
>
>
>  <<tcpdump-22.pcap>>
>
>


----------------------------------------------------------------------------
----


> _______________________________________________
> Ethereal-users mailing list
> Ethereal-users@xxxxxxxxxxxx
> http://www.ethereal.com/mailman/listinfo/ethereal-users
>