ANNOUNCEMENT: Live Wireshark University & Allegro Packets online APAC Wireshark Training Session
April 17th, 2024 | 14:30-16:00 SGT (UTC+8) | Online

Ethereal-dev: RE: 2nd Try: [Fwd: [Ethereal-dev]: Question about adding convers ations]

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

From: "Francisco Alcoba (TS/EEM)" <francisco.alcoba@xxxxxxxxxxxx>
Date: Thu, 2 Jun 2005 19:41:45 +0200
Hi,

The code you sent does not compile. I think that at least 
a modified packet-rsvp.h is missing. I'm trying to get it
working to find out what's wrong, I find it easier than
just proofreading it.

Regards,
 Francisco

> -----Original Message-----
> From: ethereal-dev-bounces@xxxxxxxxxxxx
> [mailto:ethereal-dev-bounces@xxxxxxxxxxxx]
> Sent: miércoles, 01 de junio de 2005 5:43
> To: Ethereal development; francesco.alcoba@xxxxxxxxxxxx
> Subject: Re: 2nd Try: [Fwd: [Ethereal-dev]: Question about adding
> conversations]
> 
> 
> 
> I forgot to mention that I am using the sample capture available
> from the Ethereal Sample Captures Wiki page at the following URL:
> 
> http://wiki.ethereal.com/SampleCaptures
> 
> The file in question is mpls-te.cap. Thanks!
> 
> Manu
> 
> Francisco Alcoba (TS/EEM) said the following on 05/30/2005 08:41 AM:
> > Hi,
> > 
> > Can you post the code you are trying to use and a sample capture?
> > 
> > Regards,
> >  Francisco
> > 
> > 
> >>-----Original Message-----
> >>From: ethereal-dev-bounces@xxxxxxxxxxxx
> >>[mailto:ethereal-dev-bounces@xxxxxxxxxxxx]
> >>Sent: sábado, 28 de mayo de 2005 16:49
> >>To: ethereal-dev@xxxxxxxxxxxx
> >>Subject: 2nd Try: [Fwd: [Ethereal-dev]: Question about adding
> >>conversations]
> >>
> >>
> >>Still hoping somebody can help me out on this one...
> >>
> >>Essentially, I need to know what needs to be done to generate
> >>RSVP related information apart from adding the regular conversation
> >>stuff described in README.developer. I would have thought that the
> >>task would be analogous to how we handle things to the IPv4
> >>dissector from the Ethernet frame, but I haven't been able to
> >>figure this out so far:(.
> >>
> >>Thanks in advance for any help! Regards,
> >>
> >>Manu
> >>
> >>-------- Original Message --------
> >>Date: Thu, 26 May 2005 14:48:32 -0400
> >>From: Manu Pathak <mapathak@xxxxxxxxx>
> >>User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US;	rv:1.7.5)
> >>
> >>Hi,
> >>
> >>    I am working on adding support for RSVP conversations 
> to Ethereal,
> >>and using the IP conversations code as the example to follow. So
> >>far:
> >>
> >>- I have added the gtk/conversations_rsvp.c and gtk/hostlist_rsvp.c
> >>files and successfully got an RSVP entry in the conversations list
> >>and the conversations tab. To do this, I also edited packet-rsvp.h
> >>to define the rsvphdr structure.
> >>
> >>- Added conversation stuff to packet-rsvp.c as described in the
> >>README.developer file. I am reasonably sure I have made all the
> >>changed described in Section 2.2 of that document, which deals
> >>with conversations. I also populate the rsvphdr structure in
> >>this file and have added the conversation specific initialization
> >>routine. For what it's worth, I used the conversations code
> >>in packet-afs.c and packet-beep.c as example to make these
> >>changes [As an aside, I could not find where the conversations for
> >>these protocols are available in the GUI; I would have expected
> >>them with the rest, but they don't seem to be there. Why is that
> >>the case?].
> >>
> >>    Unfortunately, when I load the sample RSVP capture file from
> >>the Ethereal Wiki page, I still don't see any information in the
> >>RSVP tab (though the Ethernet and IPv4 tabs have the information
> >>as one would expect). Clearly, I am missing something here. I
> >>think it has to do with the fact that somehow I need to add some
> >>code somewhere which would be responsible for calling the RSVP
> >>subdissector. I added something like the following to packet-rsvp.c
> >>but it did not do the trick:
> >>
> >>rsvp_dissector_table =
> >>	register_dissector_table("rsvp.proto", "RSVP Protocol",
> >>				 FT_UINT8, BASE_DEC);
> >>						
> >>register_heur_dissector_list("rsvp", &heur_subdissector_list);
> >>
> >>Can anybody tell me what I am missing? Thanks,
> >>
> >>Manu
> >>
> >>-- 
> >>------------------------------------------------------------
> ---------
> >>"Do you mean now ?"
> >>                                  -Yogi Berra, when asked 
> for the time
> >>
> >>_______________________________________________
> >>Ethereal-dev mailing list
> >>Ethereal-dev@xxxxxxxxxxxx
> >>http://www.ethereal.com/mailman/listinfo/ethereal-dev
> >>
> >>
> >>-- 
> >>------------------------------------------------------------
> ---------
> >>"Do you mean now ?"
> >>                                  -Yogi Berra, when asked 
> for the time
> >>
> >>_______________________________________________
> >>Ethereal-dev mailing list
> >>Ethereal-dev@xxxxxxxxxxxx
> >>http://www.ethereal.com/mailman/listinfo/ethereal-dev
> >>
> > 
> > 
> > _______________________________________________
> > Ethereal-dev mailing list
> > Ethereal-dev@xxxxxxxxxxxx
> > http://www.ethereal.com/mailman/listinfo/ethereal-dev
> > 
> 
> -- 
> ---------------------------------------------------------------------
> "Do you mean now ?"
>                                   -Yogi Berra, when asked for the time
> 
> _______________________________________________
> Ethereal-dev mailing list
> Ethereal-dev@xxxxxxxxxxxx
> http://www.ethereal.com/mailman/listinfo/ethereal-dev
>