Ethereal-dev: Re: [Ethereal-dev] Major Diameter Changes . . . Part 2 - Diffs and dictionaries
Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.
From: David Frascone <dave@xxxxxxxxxxxx>
Date: Mon, 29 Oct 2001 22:16:50 -0600
Attached are the cvs diffs (diameter.diff), and the xml dictionary (*.xml, *.dtd), and a sample dump (diammip1.gz). The modified files in the diff are: Makefile.am - xmlstub added, dictionary added (hopefully properly) Makefile.nmake - xmlstub added. I couldn't figure out where to put the dictionary. packet-mip.c - Dissector is now registered by name. packet-diameter-defs.h - Some was removed, but most remains as a static dictionary in case xml/the dynamic dictionary can not be loaded. packet-diameter.c - Many changes: Support for XML dictionary, inline mobile-ip now dissected. I'm also attaching diammip1 which is a dump with lots of diameter packets, some containing mobile-ip to be processed. I found some bugs in the mobile-ip dissector, and I'll be cleaning them up next. (I've already e-mailed the author) Is there any way to build under Windows with a free compiler (i.e. gcc)? I'd be happy to test this stuff under Windows if I could :( -Dave
? sunping.xml
? dictionary.dtd
? dictionary.xml
? mobileipv4.xml
? xmlstub.c
? xmlstub.h
? nasreq.xml
Index: Makefile.am
===================================================================
RCS file: /cvsroot/ethereal/Makefile.am,v
retrieving revision 1.372
diff -c -r1.372 Makefile.am
*** Makefile.am 2001/10/29 21:13:07 1.372
--- Makefile.am 2001/10/30 04:13:28
***************
*** 68,74 ****
EXTRA_PROGRAMS = ethereal ethereal_static tethereal tethereal_static editcap mergecap dftest text2pcap
EXTRA_SCRIPTS = idl2eth
! sysconf_DATA = manuf
DISSECTOR_SRC = \
packet-aarp.c \
--- 68,75 ----
EXTRA_PROGRAMS = ethereal ethereal_static tethereal tethereal_static editcap mergecap dftest text2pcap
EXTRA_SCRIPTS = idl2eth
! sysconf_DATA = manuf dictionary.dtd dictionary.xml \
! sunping.xml mobileipv4.xml nasreq.xml
DISSECTOR_SRC = \
packet-aarp.c \
***************
*** 448,454 ****
x11-declarations.h \
x11-register-info.h \
xdlc.c \
! xdlc.h
BUILT_SOURCES = \
x11-declarations.h \
--- 449,457 ----
x11-declarations.h \
x11-register-info.h \
xdlc.c \
! xdlc.h \
! xmlstub.c \
! xmlstub.h
BUILT_SOURCES = \
x11-declarations.h \
***************
*** 808,813 ****
--- 811,821 ----
randpkt.c \
rdps.c \
TODO \
+ dictionary.dtd \
+ dictionary.xml \
+ sunping.xml \
+ mobileipv4.xml \
+ nasreq.xml \
x11-fields
if SETUID_INSTALL
Index: Makefile.nmake
===================================================================
RCS file: /cvsroot/ethereal/Makefile.nmake,v
retrieving revision 1.134
diff -c -r1.134 Makefile.nmake
*** Makefile.nmake 2001/10/29 21:13:07 1.134
--- Makefile.nmake 2001/10/30 04:13:28
***************
*** 247,252 ****
--- 247,253 ----
register.obj \
util.obj \
xdlc.obj \
+ xmlstub.obj \
ethereal_OBJECTS = \
$(DISSECTOR_OBJECTS) \
Index: packet-diameter-defs.h
===================================================================
RCS file: /cvsroot/ethereal/packet-diameter-defs.h,v
retrieving revision 1.5
diff -c -r1.5 packet-diameter-defs.h
*** packet-diameter-defs.h 2001/07/30 20:08:44 1.5
--- packet-diameter-defs.h 2001/10/30 04:13:28
***************
*** 1,8 ****
/*
* Filename: packet-diameter-defs.h
- * WARNING: This file was automatically generated by dict2h.pl. Modifications
- * will be erased by next invocation of dictionary parser.
*
* Generated: Fri Feb 23 13:04:15 2001
*/
--- 1,11 ----
/*
* Filename: packet-diameter-defs.h
*
+ * This file contains the static definitions of the Diameter base protocol
+ * AVPs. If libxml is in the LD_LIBRARY_PATH, and dictionary.xml exists,
+ * then it will not be used.
+ *
+ * $Id$
* Generated: Fri Feb 23 13:04:15 2001
*/
***************
*** 12,37 ****
/* Type to string table */
-
- static value_string diameter_avp_type_vals[]={
- { 1, "OctetString" },
- { 2, "Integer32" },
- { 3, "Integer64" },
- { 4, "Unsigned32" },
- { 5, "Unsigned64" },
- { 6, "Float32" },
- { 7, "Float64" },
- { 8, "Float128" },
- { 9, "Grouped" },
- { 10, "IpAddress" },
- { 11, "Time" },
- { 12, "UTF8String" },
- { 13, "DiameterIdentity" },
- { 14, "Enumerated" },
- { 15, "IPFilterRule" },
- { 16, "QOSFilterRule" },
- {0, (char *)NULL}
- };
/* Attribute to String tables */
static value_string diameter_service_type_vals[]={
{5, "Outbound"},
--- 15,20 ----
***************
*** 99,104 ****
--- 82,88 ----
{529, "Ascend"},
{1584, "Bay Networks"},
{2636, "Juniper Networks"},
+ {5925, "ipUnplugged"},
{0,NULL}
};
***************
*** 257,264 ****
{5, "Link Broken"},
{0,NULL}
};
! static struct avp_info diameter_avps[] = {
/* Radius Attributes */
{ 1, "User-Name", DIAMETER_UTF8STRING, (value_string *)NULL},
{ 2, "User-Password", DIAMETER_OCTET_STRING, (value_string *)NULL},
--- 241,264 ----
{5, "Link Broken"},
{0,NULL}
};
+
+ static value_string diameter_mip_algorithm_type[] = {
+ {1, "MD5 Prefix/Suffix"},
+ {2, "HMAC-MD5"},
+ {3, "HMAC-SHA1"},
+ {0, NULL}
+ };
+
+ static value_string diameter_mip_replay_type[] = {
+ {1, "None"},
+ {2, "Nonce"},
+ {3, "Timestamp"},
+ {0, NULL}
+ };
+
+
! static struct old_avp_info old_diameter_avps[] = {
/* Radius Attributes */
{ 1, "User-Name", DIAMETER_UTF8STRING, (value_string *)NULL},
{ 2, "User-Password", DIAMETER_OCTET_STRING, (value_string *)NULL},
***************
*** 349,355 ****
{ 278, "Origin-State-Id", DIAMETER_UNSIGNED32, (value_string *)NULL},
{ 269, "Product-Name", DIAMETER_UTF8STRING, (value_string *)NULL},
{ 280, "Proxy-Host", DIAMETER_IDENTITY, (value_string *)NULL},
! { 284, "Proxy-Info", DIAMETER_OCTET_STRING,(value_string *)NULL},
{ 292, "Redirect-Host", DIAMETER_IDENTITY, (value_string *)NULL},
{ 261, "Redirect-Host-Usage", DIAMETER_ENUMERATED, diameter_redirect_host_usage_vals},
{ 262, "Redirect-Max-Cache-Time", DIAMETER_UNSIGNED32, (value_string *)NULL},
--- 349,355 ----
{ 278, "Origin-State-Id", DIAMETER_UNSIGNED32, (value_string *)NULL},
{ 269, "Product-Name", DIAMETER_UTF8STRING, (value_string *)NULL},
{ 280, "Proxy-Host", DIAMETER_IDENTITY, (value_string *)NULL},
! { 284, "Proxy-Info", DIAMETER_GROUPED, (value_string *)NULL},
{ 292, "Redirect-Host", DIAMETER_IDENTITY, (value_string *)NULL},
{ 261, "Redirect-Host-Usage", DIAMETER_ENUMERATED, diameter_redirect_host_usage_vals},
{ 262, "Redirect-Max-Cache-Time", DIAMETER_UNSIGNED32, (value_string *)NULL},
***************
*** 363,369 ****
{ 295, "Termination-Cause", DIAMETER_ENUMERATED, diameter_termination_cause_vals},
{ 266, "Vendor-Id", DIAMETER_ENUMERATED, diameter_vendor_specific_vendors},
{ 260, "Vendor-Specific-Application-Id", DIAMETER_GROUPED, (value_string *)NULL},
! {0, (char *)NULL, 0, (value_string*)NULL}
};
--- 363,396 ----
{ 295, "Termination-Cause", DIAMETER_ENUMERATED, diameter_termination_cause_vals},
{ 266, "Vendor-Id", DIAMETER_ENUMERATED, diameter_vendor_specific_vendors},
{ 260, "Vendor-Specific-Application-Id", DIAMETER_GROUPED, (value_string *)NULL},
! /* Diameter Mobile IP AVPs */
! { 318, "MIP-FA-to-HA-SPI", DIAMETER_UNSIGNED32, (value_string *)NULL},
! { 319, "MIP-FA-to-MN-SPI", DIAMETER_UNSIGNED32, (value_string *)NULL},
! { 320, "MIP-Reg-Request", DIAMETER_MIP_REG_REQ, (value_string *)NULL},
! { 321, "MIP-Reg-Reply", DIAMETER_OCTET_STRING, (value_string *)NULL},
! { 322, "MIP-MN-AAA-Auth", DIAMETER_GROUPED, (value_string *)NULL},
! { 325, "MIP-MN-to-FA-KEY", DIAMETER_GROUPED, (value_string *)NULL},
! { 326, "MIP-FA-to-MN-KEY", DIAMETER_GROUPED, (value_string *)NULL},
! { 328, "MIP-FA-to-HA-KEY", DIAMETER_GROUPED, (value_string *)NULL},
! { 329, "MIP-HA-to-FA-KEY", DIAMETER_GROUPED, (value_string *)NULL},
! { 330, "MIP-Foreign-Agent-Host", DIAMETER_IDENTITY, (value_string *)NULL},
! { 331, "MIP-MN-to-HA-KEY", DIAMETER_GROUPED, (value_string *)NULL},
! { 333, "MIP-Mobile-Node-Address", DIAMETER_IP_ADDRESS, (value_string *)NULL},
! { 334, "MIP-Home-Agent-Address", DIAMETER_IP_ADDRESS, (value_string *)NULL},
! { 335, "MIP-Key-Material", DIAMETER_OCTET_STRING, (value_string *)NULL},
! { 337, "MIP-Feature-Vector", DIAMETER_UNSIGNED32, (value_string *)NULL},
! { 338, "MIP-Auth-Input-Data-Length", DIAMETER_UNSIGNED32, (value_string *)NULL},
! { 339, "MIP-Authenticator-Length", DIAMETER_UNSIGNED32, (value_string *)NULL},
! { 340, "MIP-Authenticator-Offset", DIAMETER_UNSIGNED32, (value_string *)NULL},
! { 341, "MIP-MN-AAA-SPI", DIAMETER_UNSIGNED32, (value_string *)NULL},
! { 342, "MIP-PEER-SPI", DIAMETER_UNSIGNED32, (value_string *)NULL},
! { 343, "MIP-Session-Key", DIAMETER_OCTET_STRING, (value_string *)NULL},
! { 344, "MIP-FA-Challenge", DIAMETER_OCTET_STRING, (value_string *)NULL},
! { 345, "MIP-Algorithm-Type", DIAMETER_ENUMERATED, diameter_mip_algorithm_type},
! { 346, "MIP-Algorithm-Type", DIAMETER_ENUMERATED, diameter_mip_replay_type},
! { 347, "MIP-Filter-Rule", DIAMETER_IP_FILTER_RULE, (value_string *)NULL},
! { 398, "MIP-Key-Lifetime", DIAMETER_UNSIGNED32, (value_string *)NULL},
! {0, (char *)NULL, 0, (value_string*)NULL}
};
***************
*** 378,383 ****
--- 405,413 ----
{282, "Disconnect-Peer"},
{258, "Re-Auth"},
{275, "Session-Termination"},
+ /* Mip Protocol */
+ {262, "Home-Agent-MIP"},
+ {260, "AA-Mobile-Node"},
{0, (char *)NULL}
};
Index: packet-diameter.c
===================================================================
RCS file: /cvsroot/ethereal/packet-diameter.c,v
retrieving revision 1.27
diff -c -r1.27 packet-diameter.c
*** packet-diameter.c 2001/10/29 21:13:07 1.27
--- packet-diameter.c 2001/10/30 04:13:29
***************
*** 1,5 ****
/* packet-diameter.c
! * Routines for DIAMETER packet disassembly
*
* $Id: packet-diameter.c,v 1.27 2001/10/29 21:13:07 guy Exp $
*
--- 1,5 ----
/* packet-diameter.c
! * Routines for Diameter packet disassembly
*
* $Id: packet-diameter.c,v 1.27 2001/10/29 21:13:07 guy Exp $
*
***************
*** 41,52 ****
#include <string.h>
#include <ctype.h>
#include <time.h>
#include <glib.h>
#include "packet.h"
#include "resolv.h"
#include "prefs.h"
! /* This must be defined before we include packet-diameter-defs.h s*/
/* Valid data types */
typedef enum {
--- 41,55 ----
#include <string.h>
#include <ctype.h>
#include <time.h>
+ #include <dlfcn.h>
#include <glib.h>
+ #include <filesystem.h>
+ #include <xmlstub.h>
#include "packet.h"
#include "resolv.h"
#include "prefs.h"
! /* This must be defined before we include packet-diameter-defs.h */
/* Valid data types */
typedef enum {
***************
*** 68,84 ****
DIAMETER_IDENTITY, /* OctetString */
DIAMETER_ENUMERATED, /* Integer 32 */
DIAMETER_IP_FILTER_RULE, /* OctetString */
! DIAMETER_QOS_FILTER_RULE /* OctetString */
} diameterDataType;
! typedef struct avp_info {
guint32 code;
gchar *name;
diameterDataType type;
value_string *values;
} avpInfo;
#include "packet-diameter-defs.h"
#define NTP_TIME_DIFF (2208988800UL)
--- 71,155 ----
DIAMETER_IDENTITY, /* OctetString */
DIAMETER_ENUMERATED, /* Integer 32 */
DIAMETER_IP_FILTER_RULE, /* OctetString */
! DIAMETER_QOS_FILTER_RULE, /* OctetString */
! DIAMETER_MIP_REG_REQ, /* OctetString */
! DIAMETER_VENDOR_ID, /* Integer32 */
! DIAMETER_APPLICATION_ID
} diameterDataType;
!
! static value_string TypeValues[]={
! { DIAMETER_OCTET_STRING, "OctetString" },
! { DIAMETER_INTEGER32, "Integer32" },
! { DIAMETER_INTEGER64, "Integer64" },
! { DIAMETER_UNSIGNED32, "Unsigned32" },
! { DIAMETER_UNSIGNED64, "Unsigned64" },
! { DIAMETER_FLOAT32, "Float32" },
! { DIAMETER_FLOAT64, "Float64" },
! { DIAMETER_FLOAT128, "Float128" },
! { DIAMETER_GROUPED, "Grouped" },
! { DIAMETER_IP_ADDRESS, "IpAddress" },
! { DIAMETER_TIME, "Time" },
! { DIAMETER_UTF8STRING, "UTF8String" },
! { DIAMETER_IDENTITY, "DiameterIdentity" },
! { DIAMETER_ENUMERATED, "Enumerated" },
! { DIAMETER_IP_FILTER_RULE, "IPFilterRule" },
! { DIAMETER_QOS_FILTER_RULE, "QOSFilterRule" },
! { DIAMETER_MIP_REG_REQ, "MIPRegistrationRequest"},
! { DIAMETER_VENDOR_ID, "VendorId"},
! { DIAMETER_APPLICATION_ID, "AppId"},
! {0, (char *)NULL}
! };
!
! typedef struct value_name {
! guint32 value;
! gchar *name;
! struct value_name *next;
! } ValueName;
!
! typedef struct old_avp_info {
guint32 code;
gchar *name;
diameterDataType type;
value_string *values;
+ } oldAvpInfo;
+
+ typedef struct avp_info {
+ guint32 code;
+ gchar *name;
+ gchar *vendorName;
+ diameterDataType type;
+ ValueName *values;
+ struct avp_info *next;
} avpInfo;
+ typedef struct command_code {
+ guint32 code;
+ gchar *name;
+ gchar *vendorString;
+ struct command_code *next;
+ } CommandCode;
+
+ typedef struct vendor_id {
+ guint32 id;
+ gchar *name;
+ gchar *longName;
+ struct vendor_id *next;
+ } VendorId;
+
+ typedef struct application_id {
+ guint32 id;
+ gchar *name;
+ struct application_id *next;
+ } ApplicationId;
+
+ static avpInfo *avpListHead=NULL;
+ static VendorId *vendorListHead=NULL;
+ static CommandCode *commandListHead=NULL;
+ static ApplicationId *ApplicationIdHead=NULL;
+
+
#include "packet-diameter-defs.h"
#define NTP_TIME_DIFF (2208988800UL)
***************
*** 147,152 ****
--- 218,226 ----
static char gbl_diameterString[200];
static int gbl_diameterTcpPort=TCP_PORT_DIAMETER;
static int gbl_diameterSctpPort=SCTP_PORT_DIAMETER;
+ #define DIAMETER_DIR "diameter"
+ #define DICT_FN "dictionary.xml"
+ static gchar *gbl_diameterDictionary = NULL;
typedef struct _e_diameterhdr {
guint32 versionLength;
***************
*** 162,169 ****
guint32 avp_vendorId; /* optional */
} e_avphdr;
- #define AUTHENTICATOR_LENGTH 12
-
/* Diameter Header Flags */
/* RPrrrrrrCCCCCCCCCCCCCCCCCCCCCCCC */
#define DIAM_FLAGS_R 0x80
--- 236,241 ----
***************
*** 195,233 ****
#define AVP_FLAGS_RESERVED 0x1f /* 00011111 -- V M P X X X X X */
#define MIN_AVP_SIZE (sizeof(e_avphdr) - sizeof(guint32))
! #define MIN_DIAMETER_SIZE (sizeof(e_diameterhdr) + MIN_AVP_SIZE)
static void dissect_avps(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree);
! /* Diameter Manipulation Routines (mess with our strucutres) */
diameterDataType
diameter_avp_get_type(guint32 avpCode){
! int i;
! for (i=0; diameter_avps[i].name; i++) {
! if (avpCode == diameter_avps[i].code) {
/* We found it! */
! return diameter_avps[i].type;
}
}
/* If we don't find it, assume it's data */
! g_warning("DIAMETER: Unable to find type for avpCode %d!", avpCode);
return DIAMETER_OCTET_STRING;
} /* diameter_avp_get_type */
static gchar *
diameter_avp_get_name(guint32 avpCode)
{
static gchar buffer[64];
! int i;
! for (i=0; diameter_avps[i].name; i++) {
! if (avpCode == diameter_avps[i].code) {
/* We found it! */
! return diameter_avps[i].name;
}
}
/* If we don't find it, build a name string */
--- 267,882 ----
#define AVP_FLAGS_RESERVED 0x1f /* 00011111 -- V M P X X X X X */
#define MIN_AVP_SIZE (sizeof(e_avphdr) - sizeof(guint32))
! #define MIN_DIAMETER_SIZE (sizeof(e_diameterhdr))
static void dissect_avps(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree);
+ /*
+ * This routine will do a push-parse of the passed in
+ * filename. This was taken almost verbatum from
+ * the xmlsoft examples.
+ */
+ static xmlDocPtr
+ xmlParseFilePush( char *filename, int checkValid) {
+ FILE *f;
+ xmlDocPtr doc=NULL;
+ int valid=0;
+ int res, size = 1024;
+ char chars[1024];
+ xmlParserCtxtPtr ctxt;
+
+ /* I wonder what kind of a performance hit this is? */
+ *XmlStub.xmlDoValidityCheckingDefaultValue = checkValid;
+
+ f = fopen(filename, "r");
+ if (f == NULL) {
+ g_warning("Diameter: Unable to open %s", filename);
+ return NULL;
+ }
+
+ res = fread(chars, 1, 4, f);
+ if (res > 0) {
+ ctxt = XmlStub.xmlCreatePushParserCtxt(NULL, NULL,
+ chars, res, filename);
+ while ((res = fread(chars, 1, size-1, f)) > 0) {
+ XmlStub.xmlParseChunk(ctxt, chars, res, 0);
+ }
+ XmlStub.xmlParseChunk(ctxt, chars, 0, 1);
+ doc = ctxt->myDoc;
+ valid=ctxt->valid;
+ XmlStub.xmlFreeParserCtxt(ctxt);
+ }
+ fclose(f);
+
+ /* Check valid */
+ if (!valid) {
+ g_warning( "Error! Invalid xml in %s! Failed DTD check!",
+ filename);
+ return NULL;
+ }
+ return doc;
+ } /* xmlParseFilePush */
+
+ /*
+ * This routine will add a static avp to the avp list. It is
+ * only called when the XML dictionary fails to load properly.
+ */
+ static int
+ addStaticAVP(int code, gchar *name, diameterDataType type, value_string *values)
+ {
+ avpInfo *entry;
+ ValueName *vEntry=NULL;
+ int i;
+
+ /* Parse our values array, if we have one */
+ if (values) {
+ for (i=0; values[i].strptr != NULL; i++) {
+ char *valueName=NULL, *valueCode=NULL;
+ ValueName *ve = NULL;
+
+ ve = g_malloc(sizeof(ValueName));
+ ve->name = strdup(values[i].strptr);
+ ve->value = values[i].value;
+ ve->next = vEntry;
+ vEntry = ve;
+ }
+ } /* if values */
+
+ /* And, create the entry */
+ entry = (avpInfo *)g_malloc(sizeof(avpInfo));
+ entry->name = g_strdup(name);
+ entry->code = code;
+ entry->vendorName = NULL;
+ entry->type = type;
+ entry->values = vEntry;
+ if (vEntry)
+ entry->type = DIAMETER_INTEGER32;
+
+ return (0);
+
+ } /* addStaticAVP */
+
+ /*
+ * This routine will parse an XML avp entry, and add it to our
+ * avp list. If any values are present in the avp, it will
+ * add them too.
+ */
+ static int
+ xmlParseAVP(xmlDocPtr doc, xmlNodePtr cur)
+ {
+ char *name=NULL, *description=NULL, *code=NULL, *mayEncrypt=NULL,
+ *mandatory=NULL, *protected=NULL, *vendorBit=NULL, *vendorName = NULL,
+ *constrained=NULL;
+ char *type=NULL;
+ avpInfo *entry;
+ uint32_t avpType=0;
+ ValueName *vEntry=NULL;
+ int i;
+
+ /* First, get our properties */
+ name = XmlStub.xmlGetProp(cur, "name");
+ description = XmlStub.xmlGetProp(cur, "description");
+ code = XmlStub.xmlGetProp(cur, "code");
+ mayEncrypt = XmlStub.xmlGetProp(cur, "may-encrypt");
+ mandatory = XmlStub.xmlGetProp(cur, "mandatory");
+ protected = XmlStub.xmlGetProp(cur, "protected");
+ vendorBit = XmlStub.xmlGetProp(cur, "vendor-bit");
+ vendorName = XmlStub.xmlGetProp(cur, "vendor-id");
+ constrained = XmlStub.xmlGetProp(cur, "constrained");
+
+ cur = cur->xmlChildrenNode;
+
+ while (cur != NULL ) {
+ if (!strcasecmp((char *)cur->name, "type")) {
+ type = XmlStub.xmlGetProp(cur, "type-name");
+ }
+ if (!strcasecmp((char *)cur->name, "enum")) {
+ char *valueName=NULL, *valueCode=NULL;
+ ValueName *ve = NULL;
+ valueName = XmlStub.xmlGetProp(cur, "name");
+ valueCode = XmlStub.xmlGetProp(cur, "code");
+
+ if (!valueName || !valueCode) {
+ g_warning( "Error, bad value on avp %s", name);
+ return (-1);
+ }
+
+ ve = g_malloc(sizeof(ValueName));
+ ve->name = strdup(valueName);
+ ve->value = atol(valueCode);
+
+ ve->next = vEntry;
+ vEntry = ve;
+ }
+ if (!strcasecmp((char *)cur->name, "grouped")) {
+ /* WORK Recurse here for grouped AVPs */
+ type = "grouped";
+ }
+ cur=cur->next;
+ } /* while */
+
+ /*
+ * Check for the AVP Type.
+ */
+ if (type) {
+ for (i = 0; TypeValues[i].strptr; i++) {
+ if (!strcasecmp(type, TypeValues[i].strptr)) {
+ avpType = TypeValues[i].value;
+ break;
+ }
+ }
+
+ if (TypeValues[i].strptr == NULL) {
+ g_warning( "Invalid Type field in dictionary! avp %s (%s)", name, type);
+ return (-1);
+ }
+ } else if (!vEntry) {
+ g_warning("Missing type/enum field in dictionary avpName=%s",
+ name);
+ return (-1);
+ }
+
+ /* WORK - Handle flags -- for validation later */
+
+
+ /* And, create the entry */
+ entry = (avpInfo *)g_malloc(sizeof(avpInfo));
+ entry->name = g_strdup(name);
+ entry->code = atol(code);
+ if (vendorName)
+ entry->vendorName = g_strdup(vendorName);
+ else
+ entry->vendorName = NULL;
+ entry->type = avpType;
+ entry->values = vEntry;
+ if (vEntry)
+ entry->type = DIAMETER_INTEGER32;
+
+ /* And, add it to the list */
+ entry->next = avpListHead;
+ avpListHead = entry;
+
+ return (0);
+ } /* xmlParseAVP */
+
+ /*
+ * This routine will add a command to the list of commands.
+ */
+ static int
+ addCommand(int code, char *name, char *vendorId)
+ {
+ CommandCode *entry;
+
+ /*
+ * Allocate the memory required for the dictionary.
+ */
+ entry = (CommandCode *) g_malloc(sizeof (CommandCode));
+
+ if (entry == NULL) {
+ g_warning("Unable to allocate memory");
+ return (-1);
+ }
+
+ /*
+ * Allocate memory for the AVPName and copy the name to the
+ * structure
+ */
+ entry->name = g_strdup(name);
+ entry->code = code;
+ if (vendorId)
+ entry->vendorString = g_strdup(vendorId);
+ else
+ entry->vendorString = NULL;
+
+ /* Add the entry to the list */
+ entry->next = commandListHead;
+ commandListHead = entry;
+
+ return 0;
+ } /* addCommand */
+
+ /*
+ * This routine will parse the XML command, and add it to our
+ * list of commands.
+ */
+ static int
+ xmlParseCommand(xmlDocPtr doc, xmlNodePtr cur)
+ {
+ uint32_t vendorId = 0;
+ char *name, *code, *vendorIdString;
+
+ /*
+ * Get the Attributes
+ */
+ name = XmlStub.xmlGetProp(cur, "name");
+ code = XmlStub.xmlGetProp(cur, "code");
+ if (!name || !code) {
+ g_warning("Invalid command. Name or code missing!");
+ return -1;
+ }
+ vendorIdString = XmlStub.xmlGetProp(cur, "vendor-id");
+
+ if (!vendorIdString || !strcasecmp(vendorIdString, "None")) {
+ vendorIdString = NULL;
+ }
+
+ return (addCommand(atoi(code), name, vendorIdString));
+ } /* xmlParseCommand */
+
+ /* This routine adds an application to the name<-> id table */
+ static int
+ dictionaryAddApplication(char *name, int id)
+ {
+ ApplicationId *entry;
+
+ if (!name || (id <= 0)) {
+ g_warning( "Diameter Error: Inavlid application (name=%p, id=%d)",
+ name, id);
+ return (-1);
+ } /* Sanity Checks */
+
+ entry = g_malloc(sizeof(ApplicationId));
+ if (!entry) {
+ g_warning( "Unable to allocate memory");
+ return (-1);
+ }
+
+ entry->name = g_strdup(name);
+ entry->id = id;
+
+ /* Add it to the list */
+ entry->next = ApplicationIdHead;
+ ApplicationIdHead = entry;
+
+ return 0;
+ } /* dictionaryAddApplication */
+
+ /*
+ * This routine will add a vendor to the vendors list
+ */
+ static int
+ addVendor(int id, gchar *name, gchar *longName)
+ {
+ VendorId *vendor;
+
+ /* add entry */
+ vendor=g_malloc(sizeof(VendorId));
+ if (!vendor) {
+ return (-1);
+ }
+
+ vendor->id = id;
+ vendor->name = g_strdup(name);
+ vendor->longName = g_strdup(longName);
+ vendor->next = vendorListHead;
+ vendorListHead = vendor;
+
+ return 0;
+ } /* addVendor */
+
+ /*
+ * This routine will pars in a XML vendor entry.
+ */
+ static int
+ xmlParseVendor(xmlDocPtr doc, xmlNodePtr cur)
+ {
+ char *name=NULL, *code=NULL, *id=NULL;
+
+ /* First, get our properties */
+ id = XmlStub.xmlGetProp(cur, "vendor-id");
+ name = XmlStub.xmlGetProp(cur, "name");
+ code = XmlStub.xmlGetProp(cur, "code");
+
+ if (!id || !name || !code) {
+ g_warning( "Invalid vendor section. vendor-id, name, and code must be specified");
+ return -1;
+ }
+
+ return (addVendor(atoi(code), id, name));
+ } /* addVendor */
+
+ /*
+ * This routine will either parse in the base protocol, or an application.
+ */
+ static int
+ xmlDictionaryParseSegment(xmlDocPtr doc, xmlNodePtr cur, int base)
+ {
+ if (!base) {
+ char *name;
+ char *id;
+
+ /* Add our application */
+ id = XmlStub.xmlGetProp(cur, "id");
+ name = XmlStub.xmlGetProp(cur, "name");
+
+ if (!name || !id) {
+ /* ERROR!!! */
+ g_warning("Diameter: Invalid application!: name=\"%s\", id=\"%s\"",
+ name?name:"NULL", id?id:"NULL");
+ return -1;
+ }
+
+ /* Add the application */
+ if (dictionaryAddApplication(name, atol(id)) != 0) {
+ /* ERROR! */
+ return -1;
+ }
+ }
+
+
+ /*
+ * Get segment values
+ */
+ cur = cur->xmlChildrenNode;
+ while (cur != NULL) {
+ if (!strcasecmp((char *)cur->name, "avp")) {
+ /* we have an avp!!! */
+ xmlParseAVP(doc, cur);
+ } else if (!strcasecmp((char *)cur->name, "vendor")) {
+ /* we have a vendor */
+ xmlParseVendor(doc, cur);
+ /* For now, ignore typedefn and text */
+ } else if (!strcasecmp((char *)cur->name, "command")) {
+ /* Found a command */
+ xmlParseCommand(doc,cur);
+ } else if (!strcasecmp((char *)cur->name, "text")) {
+ } else if (!strcasecmp((char *)cur->name, "comment")) {
+ } else if (!strcasecmp((char *)cur->name, "typedefn")) {
+ /* WORK -- parse in valid types . . . */
+ } else {
+ /* IF we got here, we're an error */
+ g_warning("Error! expecting an avp or a typedefn (got \"%s\")",
+ cur->name);
+ return (-1);
+ }
+ cur = cur->next;
+ } /* while */
+ return 0;
+ } /* xmlDictionaryParseSegment */
+
+ /*
+ * The main xml parse routine. This will walk through an XML
+ * dictionary that has been parsed by libxml.
+ */
+ static int
+ xmlDictionaryParse(xmlDocPtr doc, xmlNodePtr cur)
+ {
+ /* We should expect a base protocol, followed by multiple applicaitons */
+ while (cur != NULL) {
+ if (!strcasecmp((char *)cur->name, "base")) {
+ /* Base protocol. Descend and parse */
+ xmlDictionaryParseSegment(doc, cur, 1);
+ } else if (!strcasecmp((char *)cur->name, "application")) {
+ /* Application. Descend and parse */
+ xmlDictionaryParseSegment(doc, cur, 0);
+ } else if (!strcasecmp((char *)cur->name, "text")) {
+ /* Ignore text */
+ } else {
+ g_warning( "Diameter: XML Expecting a base or an application (got \"%s\")",
+ cur->name);
+ return (-1);
+ }
+ cur = cur->next;
+ }
+
+ return 0;
+
+ } /* xmlDictionaryParse */
+
+ /*
+ * This routine will call libxml to parse in the dictionary.
+ */
+ static int
+ loadXMLDictionary()
+ {
+ xmlDocPtr doc;
+ xmlNodePtr cur;
+
+ /*
+ * build an XML tree from a the file;
+ */
+ XmlStub.xmlKeepBlanksDefault(0); /* Strip leading and trailing blanks */
+ XmlStub.xmlSubstituteEntitiesDefault(1); /* Substitute entities automagically */
+ doc = xmlParseFilePush(gbl_diameterDictionary, 1); /* Parse the XML (do validity checks)*/
+
+ /* Check for invalid xml */
+ if (doc == NULL) {
+ g_warning("Diameter: Unable to parse xmldictionary %s",
+ gbl_diameterDictionary);
+ return -1;
+ }
+
+ /*
+ * Check the document is of the right kind
+ */
+ cur = XmlStub.xmlDocGetRootElement(doc);
+ if (cur == NULL) {
+ g_warning("Diameter: Error: \"%s\": empty document",
+ gbl_diameterDictionary);
+ XmlStub.xmlFreeDoc(doc);
+ return -1;
+ }
+ if (XmlStub.xmlStrcmp(cur->name, (const xmlChar *) "dictionary")) {
+ g_warning("Diameter: Error: \"%s\": document of the wrong type, root node != dictionary",
+ gbl_diameterDictionary);
+ XmlStub.xmlFreeDoc(doc);
+ return -1;
+ }
+
+ /*
+ * Ok, the dictionary has been parsed by libxml, and is valid.
+ * All we have to do now is read in our information.
+ */
+ if (xmlDictionaryParse(doc, cur->xmlChildrenNode) != 0) {
+ /* Error has already been printed */
+ return -1;
+ }
+
+ /* Once we're done parsing, free up the xml memory */
+ XmlStub.xmlFreeDoc(doc);
+
+ return 0;
+ } /* loadXMLDictionary */
+
+ /*
+ * Fallback routine. In the event of ANY error when loading the XML
+ * dictionary, this routine will populate the new avp list structures
+ * with the old static data from packet-diameter-defs.h
+ */
+ static void
+ initializeDictionaryDefaults()
+ {
+ int i;
! /* Add static vendors to list */
! for(i=0; diameter_vendor_specific_vendors[i].strptr; i++) {
! addVendor(diameter_vendor_specific_vendors[i].value,
! diameter_vendor_specific_vendors[i].strptr,
! diameter_vendor_specific_vendors[i].strptr);
! }
! /* Add static commands to list. */
! for(i=0; diameter_command_code_vals[i].strptr; i++) {
! addCommand(diameter_command_code_vals[i].value,
! diameter_command_code_vals[i].strptr, NULL);
! }
!
! /* Add static AVPs to list */
! for (i=0; old_diameter_avps[i].name; i++) {
! addStaticAVP(old_diameter_avps[i].code,
! old_diameter_avps[i].name,
! old_diameter_avps[i].type,
! old_diameter_avps[i].values);
! }
!
! } /* initializeDictionaryDefaults */
!
! /*
! * This routine will attempt to load the XML dictionary, and on
! * failure, will call initializeDictionaryDefaults to load in
! * our static dictionary.
! */
! static void
! initializeDictionary()
! {
! /*
! * Using ugly ordering here. If loadLibXML succeeds, then
! * loadXMLDictionary will be called. This is one of the few times when
! * I think this is prettier than the nested if alternative.
! */
! if (loadLibXML() ||
! (loadXMLDictionary() != 0)) {
! /* Something failed. Use the static dictionary */
! g_warning("Diameter: Using static dictionary! (Unable to use XML)");
! initializeDictionaryDefaults();
! }
! } /* initializeDictionary */
!
!
!
! /*
! * These routines manipulate the diameter structures.
! */
!
! /* return command string, based on the code */
! static gchar *
! diameter_command_to_str(guint32 commandCode)
! {
! CommandCode *probe;
! static gchar buffer[64];
!
! for (probe=commandListHead; probe; probe=probe->next) {
! if (commandCode == probe->code) {
! return probe->name;
! }
! }
!
! snprintf(buffer, sizeof(buffer),
! "Cmd-0x%08x", commandCode);
! return buffer;
! }/*diameter_command_to_str */
! /* return vendor string, based on the id */
! static gchar *
! diameter_vendor_to_str(guint32 vendorId) {
! VendorId *probe;
! static gchar buffer[64];
!
! for (probe=vendorListHead; probe; probe=probe->next) {
! if (vendorId == probe->id) {
! return probe->longName;
! }
! }
!
! snprintf(buffer, sizeof(buffer),
! "Vendor 0x%08x", vendorId);
! return buffer;
! } /*diameter_vendor_to_str */
! /* return application string, based on the id */
! static gchar *
! diameter_app_to_str(guint32 vendorId) {
! ApplicationId *probe;
! static gchar buffer[64];
!
! for (probe=ApplicationIdHead; probe; probe=probe->next) {
! if (vendorId == probe->id) {
! return probe->name;
! }
! }
!
! snprintf(buffer, sizeof(buffer),
! "AppId 0x%08x", vendorId);
! return buffer;
! } /*diameter_app_to_str */
+ /* return an avp type, based on the code */
diameterDataType
diameter_avp_get_type(guint32 avpCode){
! avpInfo *probe;
!
! for (probe=avpListHead; probe; probe=probe->next) {
! if (avpCode == probe->code) {
/* We found it! */
! return probe->type;
}
}
+
/* If we don't find it, assume it's data */
! g_warning("Diameter: Unable to find type for avpCode %d!", avpCode);
return DIAMETER_OCTET_STRING;
} /* diameter_avp_get_type */
+ /* return an avp name from the code */
static gchar *
diameter_avp_get_name(guint32 avpCode)
{
static gchar buffer[64];
+ avpInfo *probe;
! for (probe=avpListHead; probe; probe=probe->next) {
! if (avpCode == probe->code) {
/* We found it! */
! return probe->name;
}
}
/* If we don't find it, build a name string */
***************
*** 239,251 ****
{
static gchar buffer[64];
! int i;
! for (i=0; diameter_avps[i].name; i++) {
! if (avpCode == diameter_avps[i].code) {
! /* We found the code. Now find the value! */
! if (!diameter_avps[i].values)
! break;
! return val_to_str(avpValue, diameter_avps[i].values , "Unknown Value: 0x%08x");
}
}
/* If we don't find the avp, build a value string */
--- 888,905 ----
{
static gchar buffer[64];
! avpInfo *probe;
!
! for (probe=avpListHead; probe; probe=probe->next) {
! if (avpCode == probe->code) {
! ValueName *vprobe;
! for(vprobe=probe->values; vprobe; vprobe=vprobe->next) {
! if (avpValue == vprobe->value) {
! return vprobe->name;
! }
! }
! sprintf(buffer, "Unknown Value: 0x%08x", avpValue);
! return buffer;
}
}
/* If we don't find the avp, build a value string */
***************
*** 296,301 ****
--- 950,966 ----
gchar commandString[64], vendorString[64];
gint i;
guint bpos;
+ static int initialized=FALSE;
+
+ /*
+ * Only parse in dictionary if there are diameter packets to
+ * dissect.
+ */
+ if (!initialized) {
+ /* Read in our dictionary, if it exists. */
+ initializeDictionary();
+ initialized=TRUE;
+ }
/* Make entries in Protocol column and Info column on summary display */
if (check_col(pinfo->fd, COL_PROTOCOL))
***************
*** 315,321 ****
if (dh.vendorId) {
strcpy(vendorString,
! val_to_str(dh.vendorId, diameter_vendor_specific_vendors, "Unknown Vendor: %08x"));
} else {
strcpy(vendorString, "None");
}
--- 980,986 ----
if (dh.vendorId) {
strcpy(vendorString,
! diameter_vendor_to_str(dh.vendorId));
} else {
strcpy(vendorString, "None");
}
***************
*** 345,351 ****
}
/* Set up our commandString */
! strcpy(commandString, val_to_str(commandCode, diameter_command_code_vals, "Unknown Command: 0x%08x"));
if (flags & DIAM_FLAGS_R)
strcat(commandString, "-Request");
else
--- 1010,1016 ----
}
/* Set up our commandString */
! strcpy(commandString, diameter_command_to_str(commandCode));
if (flags & DIAM_FLAGS_R)
strcat(commandString, "-Request");
else
***************
*** 353,359 ****
/* Short packet. Should have at LEAST one avp */
if (pktLength < MIN_DIAMETER_SIZE) {
! g_warning("DIAMETER: Packet too short: %d bytes less than min size (%d bytes))",
pktLength, MIN_DIAMETER_SIZE);
BadPacket = TRUE;
}
--- 1018,1024 ----
/* Short packet. Should have at LEAST one avp */
if (pktLength < MIN_DIAMETER_SIZE) {
! g_warning("Diameter: Packet too short: %d bytes less than min size (%d bytes))",
pktLength, MIN_DIAMETER_SIZE);
BadPacket = TRUE;
}
***************
*** 361,377 ****
/* And, check our reserved flags/version */
if ((flags & DIAM_FLAGS_RESERVED) ||
(version != 1)) {
! g_warning("DIAMETER: Bad packet: Bad Flags(0x%x) or Version(%u)",
flags, version);
BadPacket = TRUE;
}
if (check_col(pinfo->fd, COL_INFO)) {
col_add_fstr(pinfo->fd, COL_INFO,
! "%s%s%s%s: %s vendor=%s (hop-id=%d) (end-id=%d) RPE=%d%d%d",
(BadPacket)?"***** Bad Packet!: ":"",
(flags & DIAM_FLAGS_P)?"Proxyable ":"",
- (flags & DIAM_FLAGS_R)?"Request":"Answer",
(flags & DIAM_FLAGS_E)?" Error":"",
commandString, vendorString,
dh.hopByHopId, dh.endToEndId,
--- 1026,1041 ----
/* And, check our reserved flags/version */
if ((flags & DIAM_FLAGS_RESERVED) ||
(version != 1)) {
! g_warning("Diameter: Bad packet: Bad Flags(0x%x) or Version(%u)",
flags, version);
BadPacket = TRUE;
}
if (check_col(pinfo->fd, COL_INFO)) {
col_add_fstr(pinfo->fd, COL_INFO,
! "%s%s%s: %s vendor=%s (hop-id=%d) (end-id=%d) RPE=%d%d%d",
(BadPacket)?"***** Bad Packet!: ":"",
(flags & DIAM_FLAGS_P)?"Proxyable ":"",
(flags & DIAM_FLAGS_E)?" Error":"",
commandString, vendorString,
dh.hopByHopId, dh.endToEndId,
***************
*** 421,432 ****
/* Command Code */
proto_tree_add_uint_format(diameter_tree, hf_diameter_code,
! tvb, offset, 3, commandCode, "Command Code: %s", commandString);
offset += 3;
/* Vendor Id */
proto_tree_add_uint_format(diameter_tree,hf_diameter_vendor_id,
! tvb, offset, 4, dh.vendorId, "Vendor-Id: %s", vendorString);
offset += 4;
/* Hop-by-hop Identifier */
--- 1085,1096 ----
/* Command Code */
proto_tree_add_uint_format(diameter_tree, hf_diameter_code,
! tvb, offset, 3, commandCode, "Command Code: %s", commandString);
offset += 3;
/* Vendor Id */
proto_tree_add_uint_format(diameter_tree,hf_diameter_vendor_id,
! tvb, offset, 4, dh.vendorId, "Vendor-Id: %s", vendorString);
offset += 4;
/* Hop-by-hop Identifier */
***************
*** 464,469 ****
--- 1128,1191 ----
} /* dissect_diameter */
/*
+ * Call the mip_dissector, after saving our pinfo variables
+ * so it doesn't write to our column display.
+ */
+ static void
+ safe_dissect_mip(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree,
+ size_t offset, size_t length)
+ {
+ static dissector_handle_t mip_handle;
+ static int mipInitialized=FALSE;
+ tvbuff_t *mip_tvb;
+ address save_dl_src;
+ address save_dl_dst;
+ address save_net_src;
+ address save_net_dst;
+ address save_src;
+ address save_dst;
+ gboolean save_in_error_pkt;
+
+ if (!mipInitialized) {
+ mip_handle = find_dissector("mip");
+ mipInitialized=TRUE;
+ }
+
+ mip_tvb = tvb_new_subset(tvb, offset,
+ MIN(length, tvb_length(tvb)-offset),
+ length);
+
+ /* The contained packet is a MIP registration request;
+ dissect it with the MIP dissector. */
+ col_set_writable(pinfo->fd, FALSE);
+
+ /* Also, save the current values of the addresses, and restore
+ them when we're finished dissecting the contained packet, so
+ that the address columns in the summary don't reflect the
+ contained packet, but reflect this packet instead. */
+ save_dl_src = pinfo->dl_src;
+ save_dl_dst = pinfo->dl_dst;
+ save_net_src = pinfo->net_src;
+ save_net_dst = pinfo->net_dst;
+ save_src = pinfo->src;
+ save_dst = pinfo->dst;
+ save_in_error_pkt = pinfo->in_error_pkt;
+
+ call_dissector(mip_handle, mip_tvb, pinfo, tree);
+
+ /* Restore the "we're inside an error packet" flag. */
+ pinfo->in_error_pkt = save_in_error_pkt;
+ pinfo->dl_src = save_dl_src;
+ pinfo->dl_dst = save_dl_dst;
+ pinfo->net_src = save_net_src;
+ pinfo->net_dst = save_net_dst;
+ pinfo->src = save_src;
+ pinfo->dst = save_dst;
+
+
+ } /* safe_dissect_mip */
+
+ /*
* This function will dissect the AVPs in a diameter packet. It handles
* all normal types, and even recursively calls itself for grouped AVPs
*/
***************
*** 482,487 ****
--- 1204,1210 ----
size_t offset = 0 ;
char dataBuffer[4096];
tvbuff_t *group_tvb;
+ tvbuff_t *mip_tvb;
proto_tree *group_tree;
proto_item *grouptf;
proto_item *avptf;
***************
*** 514,520 ****
/* Check for short packet */
if (packetLength < (long)MIN_AVP_SIZE) {
! g_warning("DIAMETER: AVP Payload too short: %d bytes less than min size (%d bytes))",
packetLength, MIN_AVP_SIZE);
BadPacket = TRUE;
/* Don't even bother trying to parse a short packet. */
--- 1237,1243 ----
/* Check for short packet */
if (packetLength < (long)MIN_AVP_SIZE) {
! g_warning("Diameter: AVP Payload too short: %d bytes less than min size (%d bytes))",
packetLength, MIN_AVP_SIZE);
BadPacket = TRUE;
/* Don't even bother trying to parse a short packet. */
***************
*** 562,568 ****
if (vendorId) {
strcpy(vendorString,
! val_to_str(vendorId, diameter_vendor_specific_vendors, "Unknown Vendor: %08x"));
} else {
vendorString[0]='\0';
}
--- 1285,1291 ----
if (vendorId) {
strcpy(vendorString,
! diameter_vendor_to_str(vendorId));
} else {
vendorString[0]='\0';
}
***************
*** 570,576 ****
/* Check for bad length */
if (avpLength < MIN_AVP_SIZE ||
((long)avpLength > packetLength)) {
! g_warning("DIAMETER: AVP payload size invalid: avp_length: %d bytes, "
"min: %d bytes, packetLen: %d",
avpLength, MIN_AVP_SIZE, packetLength);
BadPacket = TRUE;
--- 1293,1299 ----
/* Check for bad length */
if (avpLength < MIN_AVP_SIZE ||
((long)avpLength > packetLength)) {
! g_warning("Diameter: AVP payload size invalid: avp_length: %d bytes, "
"min: %d bytes, packetLen: %d",
avpLength, MIN_AVP_SIZE, packetLength);
BadPacket = TRUE;
***************
*** 578,584 ****
/* Check for bad flags */
if (flags & AVP_FLAGS_RESERVED) {
! g_warning("DIAMETER: Invalid AVP: Reserved bit set. flags = 0x%x,"
" resFl=0x%x",
flags, AVP_FLAGS_RESERVED);
/* For now, don't set bad packet, since I'm accidentally setting a wrong bit */
--- 1301,1307 ----
/* Check for bad flags */
if (flags & AVP_FLAGS_RESERVED) {
! g_warning("Diameter: Invalid AVP: Reserved bit set. flags = 0x%x,"
" resFl=0x%x",
flags, AVP_FLAGS_RESERVED);
/* For now, don't set bad packet, since I'm accidentally setting a wrong bit */
***************
*** 597,610 ****
/* Check for out of bounds */
if (packetLength < 0) {
! g_warning("DIAMETER: Bad AVP: Bad new length (%d bytes) ",
packetLength);
BadPacket = TRUE;
}
/* Make avp Name & type */
! strcpy(avpTypeString, val_to_str(diameter_avp_get_type(avph.avp_code), diameter_avp_type_vals,
! "Unknown-Type: 0x%08x"));
strcpy(avpNameString, diameter_avp_get_name(avph.avp_code));
avptf = proto_tree_add_text(avp_tree, tvb,
--- 1320,1333 ----
/* Check for out of bounds */
if (packetLength < 0) {
! g_warning("Diameter: Bad AVP: Bad new length (%d bytes) ",
packetLength);
BadPacket = TRUE;
}
/* Make avp Name & type */
! strcpy(avpTypeString, val_to_str(diameter_avp_get_type(avph.avp_code), TypeValues,
! "Unknown-Type: 0x%08x"));
strcpy(avpNameString, diameter_avp_get_name(avph.avp_code));
avptf = proto_tree_add_text(avp_tree, tvb,
***************
*** 618,624 ****
if (avpi_tree !=NULL) {
/* Command Code */
proto_tree_add_uint_format(avpi_tree, hf_diameter_avp_code,
! tvb, offset, 4, avph.avp_code, "AVP Code: %s", avpNameString);
offset += 4;
tf = proto_tree_add_uint_format(avpi_tree, hf_diameter_avp_flags, tvb,
--- 1341,1347 ----
if (avpi_tree !=NULL) {
/* Command Code */
proto_tree_add_uint_format(avpi_tree, hf_diameter_avp_code,
! tvb, offset, 4, avph.avp_code, "AVP Code: %s", avpNameString);
offset += 4;
tf = proto_tree_add_uint_format(avpi_tree, hf_diameter_avp_flags, tvb,
***************
*** 775,780 ****
--- 1498,1533 ----
"Value: 0x%08x (%u): %s", data, data, valstr);
}
break;
+ case DIAMETER_VENDOR_ID:
+ {
+ guint32 data;
+
+ memcpy(&data, dataBuffer, 4);
+ data = ntohl(data);
+ valstr = diameter_vendor_to_str(data);
+ proto_tree_add_uint_format(avpi_tree, hf_diameter_avp_data_uint32,
+ tvb, offset, avpDataLength, data,
+ "%s (0x%08x)", valstr, data);
+ }
+ break;
+ case DIAMETER_APPLICATION_ID:
+ {
+ guint32 data;
+
+ memcpy(&data, dataBuffer, 4);
+ data = ntohl(data);
+ valstr = diameter_app_to_str(data);
+ proto_tree_add_uint_format(avpi_tree, hf_diameter_avp_data_uint32,
+ tvb, offset, avpDataLength, data,
+ "%s (0x%08x)", valstr, data);
+ }
+ break;
+ case DIAMETER_MIP_REG_REQ:
+
+ /* Make a new tvb */
+ safe_dissect_mip(tvb, pinfo, avpi_tree, offset, avpDataLength);
+ break;
+
default:
case DIAMETER_OCTET_STRING:
proto_tree_add_bytes_format(avpi_tree, hf_diameter_avp_data_bytes,
***************
*** 794,829 ****
void
proto_reg_handoff_diameter(void)
{
! static int Initialized=FALSE;
! static int TcpPort=0;
! static int SctpPort=0;
!
! if (Initialized) {
! dissector_delete("tcp.port", TcpPort, dissect_diameter);
! dissector_delete("sctp.port", SctpPort, dissect_diameter);
! } else {
! Initialized=TRUE;
! }
!
! /* set port for future deletes */
! TcpPort=gbl_diameterTcpPort;
! SctpPort=gbl_diameterSctpPort;
!
! strcpy(gbl_diameterString, "Diameter Protocol");
! /* g_warning ("Diameter: Adding tcp dissector to port %d",
! gbl_diameterTcpPort); */
! dissector_add("tcp.port", gbl_diameterTcpPort, dissect_diameter,
! proto_diameter);
! dissector_add("sctp.port", gbl_diameterSctpPort,
! dissect_diameter, proto_diameter);
}
/* registration with the filtering engine */
void
proto_register_diameter(void)
{
-
static hf_register_info hf[] = {
{ &hf_diameter_version,
{ "Version", "diameter.version", FT_UINT8, BASE_HEX, NULL, 0x00,
--- 1547,1581 ----
void
proto_reg_handoff_diameter(void)
{
! static int Initialized=FALSE;
! static int TcpPort=0;
! static int SctpPort=0;
!
! if (Initialized) {
! dissector_delete("tcp.port", TcpPort, dissect_diameter);
! dissector_delete("sctp.port", SctpPort, dissect_diameter);
! } else {
! Initialized=TRUE;
! }
! /* set port for future deletes */
! TcpPort=gbl_diameterTcpPort;
! SctpPort=gbl_diameterSctpPort;
!
! strcpy(gbl_diameterString, "Diameter Protocol");
!
! /* g_warning ("Diameter: Adding tcp dissector to port %d",
! gbl_diameterTcpPort); */
! dissector_add("tcp.port", gbl_diameterTcpPort, dissect_diameter,
! proto_diameter);
! dissector_add("sctp.port", gbl_diameterSctpPort,
! dissect_diameter, proto_diameter);
}
/* registration with the filtering engine */
void
proto_register_diameter(void)
{
static hf_register_info hf[] = {
{ &hf_diameter_version,
{ "Version", "diameter.version", FT_UINT8, BASE_HEX, NULL, 0x00,
***************
*** 831,864 ****
{ &hf_diameter_length,
{ "Length","diameter.length", FT_UINT24, BASE_DEC, NULL, 0x0,
"", HFILL }},
!
{ &hf_diameter_flags,
{ "Flags", "diameter.flags", FT_UINT8, BASE_HEX, NULL, 0x0,
"", HFILL }},
{ &hf_diameter_flags_request,
! { "Request", "diameter.flags.request", FT_BOOLEAN, 8, TFS(&flags_set_truth), DIAM_FLAGS_R,
"", HFILL }},
{ &hf_diameter_flags_proxyable,
! { "Proxyable", "diameter.flags.proxyable", FT_BOOLEAN, 8, TFS(&flags_set_truth), DIAM_FLAGS_P,
"", HFILL }},
{ &hf_diameter_flags_error,
! { "Error","diameter.flags.error", FT_BOOLEAN, 8, TFS(&flags_set_truth), DIAM_FLAGS_E,
"", HFILL }},
{ &hf_diameter_flags_reserved3,
! { "Reserved","diameter.flags.reserved3", FT_BOOLEAN, 8, TFS(&reserved_set),
! DIAM_FLAGS_RESERVED3, "", HFILL }},
{ &hf_diameter_flags_reserved4,
! { "Reserved","diameter.flags.reserved4", FT_BOOLEAN, 8, TFS(&reserved_set),
! DIAM_FLAGS_RESERVED4, "", HFILL }},
{ &hf_diameter_flags_reserved5,
! { "Reserved","diameter.flags.reserved5", FT_BOOLEAN, 8, TFS(&reserved_set),
! DIAM_FLAGS_RESERVED5, "", HFILL }},
{ &hf_diameter_flags_reserved6,
! { "Reserved","diameter.flags.reserved6", FT_BOOLEAN, 8, TFS(&reserved_set),
! DIAM_FLAGS_RESERVED6, "", HFILL }},
{ &hf_diameter_flags_reserved7,
! { "Reserved","diameter.flags.reserved7", FT_BOOLEAN, 8, TFS(&reserved_set),
! DIAM_FLAGS_RESERVED7, "", HFILL }},
{ &hf_diameter_code,
{ "Command Code","diameter.code", FT_UINT24, BASE_DEC,
--- 1583,1616 ----
{ &hf_diameter_length,
{ "Length","diameter.length", FT_UINT24, BASE_DEC, NULL, 0x0,
"", HFILL }},
!
{ &hf_diameter_flags,
{ "Flags", "diameter.flags", FT_UINT8, BASE_HEX, NULL, 0x0,
"", HFILL }},
{ &hf_diameter_flags_request,
! { "Request", "diameter.flags.request", FT_BOOLEAN, 8, TFS(&flags_set_truth), DIAM_FLAGS_R,
"", HFILL }},
{ &hf_diameter_flags_proxyable,
! { "Proxyable", "diameter.flags.proxyable", FT_BOOLEAN, 8, TFS(&flags_set_truth), DIAM_FLAGS_P,
"", HFILL }},
{ &hf_diameter_flags_error,
! { "Error","diameter.flags.error", FT_BOOLEAN, 8, TFS(&flags_set_truth), DIAM_FLAGS_E,
"", HFILL }},
{ &hf_diameter_flags_reserved3,
! { "Reserved","diameter.flags.reserved3", FT_BOOLEAN, 8, TFS(&reserved_set),
! DIAM_FLAGS_RESERVED3, "", HFILL }},
{ &hf_diameter_flags_reserved4,
! { "Reserved","diameter.flags.reserved4", FT_BOOLEAN, 8, TFS(&reserved_set),
! DIAM_FLAGS_RESERVED4, "", HFILL }},
{ &hf_diameter_flags_reserved5,
! { "Reserved","diameter.flags.reserved5", FT_BOOLEAN, 8, TFS(&reserved_set),
! DIAM_FLAGS_RESERVED5, "", HFILL }},
{ &hf_diameter_flags_reserved6,
! { "Reserved","diameter.flags.reserved6", FT_BOOLEAN, 8, TFS(&reserved_set),
! DIAM_FLAGS_RESERVED6, "", HFILL }},
{ &hf_diameter_flags_reserved7,
! { "Reserved","diameter.flags.reserved7", FT_BOOLEAN, 8, TFS(&reserved_set),
! DIAM_FLAGS_RESERVED7, "", HFILL }},
{ &hf_diameter_code,
{ "Command Code","diameter.code", FT_UINT24, BASE_DEC,
***************
*** 872,878 ****
{ &hf_diameter_endtoendid,
{ "End-to-End Identifier", "diameter.endtoendid", FT_UINT32,
BASE_HEX, NULL, 0x0, "", HFILL }},
!
{ &hf_diameter_avp_code,
{ "AVP Code","diameter.avp.code", FT_UINT32, BASE_DEC,
NULL, 0x0, "", HFILL }},
--- 1624,1630 ----
{ &hf_diameter_endtoendid,
{ "End-to-End Identifier", "diameter.endtoendid", FT_UINT32,
BASE_HEX, NULL, 0x0, "", HFILL }},
!
{ &hf_diameter_avp_code,
{ "AVP Code","diameter.avp.code", FT_UINT32, BASE_DEC,
NULL, 0x0, "", HFILL }},
***************
*** 885,913 ****
{ "AVP Flags","diameter.avp.flags", FT_UINT8, BASE_HEX,
NULL, 0x0, "", HFILL }},
{ &hf_diameter_avp_flags_vendor_specific,
! { "Vendor-Specific", "diameter.flags.vendorspecific", FT_BOOLEAN, 8, TFS(&flags_set_truth), AVP_FLAGS_V,
"", HFILL }},
{ &hf_diameter_avp_flags_mandatory,
! { "Mandatory", "diameter.flags.mandatory", FT_BOOLEAN, 8, TFS(&flags_set_truth), AVP_FLAGS_M,
"", HFILL }},
{ &hf_diameter_avp_flags_protected,
! { "Protected","diameter.avp.flags.protected", FT_BOOLEAN, 8, TFS(&flags_set_truth), AVP_FLAGS_P,
"", HFILL }},
{ &hf_diameter_avp_flags_reserved3,
! { "Reserved","diameter.avp.flags.reserved3", FT_BOOLEAN, 8, TFS(&reserved_set),
! AVP_FLAGS_RESERVED3, "", HFILL }},
{ &hf_diameter_avp_flags_reserved4,
! { "Reserved","diameter.avp.flags.reserved4", FT_BOOLEAN, 8, TFS(&reserved_set),
! AVP_FLAGS_RESERVED4, "", HFILL }},
{ &hf_diameter_avp_flags_reserved5,
! { "Reserved","diameter.avp.flags.reserved5", FT_BOOLEAN, 8, TFS(&reserved_set),
! AVP_FLAGS_RESERVED5, "", HFILL }},
{ &hf_diameter_avp_flags_reserved6,
! { "Reserved","diameter.avp.flags.reserved6", FT_BOOLEAN, 8, TFS(&reserved_set),
! AVP_FLAGS_RESERVED6, "", HFILL }},
{ &hf_diameter_avp_flags_reserved7,
! { "Reserved","diameter.avp.flags.reserved7", FT_BOOLEAN, 8, TFS(&reserved_set),
! AVP_FLAGS_RESERVED7, "", HFILL }},
{ &hf_diameter_avp_vendor_id,
{ "AVP Vendor Id","diameter.avp.vendorId", FT_UINT32, BASE_DEC,
NULL, 0x0, "", HFILL }},
--- 1637,1665 ----
{ "AVP Flags","diameter.avp.flags", FT_UINT8, BASE_HEX,
NULL, 0x0, "", HFILL }},
{ &hf_diameter_avp_flags_vendor_specific,
! { "Vendor-Specific", "diameter.flags.vendorspecific", FT_BOOLEAN, 8, TFS(&flags_set_truth), AVP_FLAGS_V,
"", HFILL }},
{ &hf_diameter_avp_flags_mandatory,
! { "Mandatory", "diameter.flags.mandatory", FT_BOOLEAN, 8, TFS(&flags_set_truth), AVP_FLAGS_M,
"", HFILL }},
{ &hf_diameter_avp_flags_protected,
! { "Protected","diameter.avp.flags.protected", FT_BOOLEAN, 8, TFS(&flags_set_truth), AVP_FLAGS_P,
"", HFILL }},
{ &hf_diameter_avp_flags_reserved3,
! { "Reserved","diameter.avp.flags.reserved3", FT_BOOLEAN, 8, TFS(&reserved_set),
! AVP_FLAGS_RESERVED3, "", HFILL }},
{ &hf_diameter_avp_flags_reserved4,
! { "Reserved","diameter.avp.flags.reserved4", FT_BOOLEAN, 8, TFS(&reserved_set),
! AVP_FLAGS_RESERVED4, "", HFILL }},
{ &hf_diameter_avp_flags_reserved5,
! { "Reserved","diameter.avp.flags.reserved5", FT_BOOLEAN, 8, TFS(&reserved_set),
! AVP_FLAGS_RESERVED5, "", HFILL }},
{ &hf_diameter_avp_flags_reserved6,
! { "Reserved","diameter.avp.flags.reserved6", FT_BOOLEAN, 8, TFS(&reserved_set),
! AVP_FLAGS_RESERVED6, "", HFILL }},
{ &hf_diameter_avp_flags_reserved7,
! { "Reserved","diameter.avp.flags.reserved7", FT_BOOLEAN, 8, TFS(&reserved_set),
! AVP_FLAGS_RESERVED7, "", HFILL }},
{ &hf_diameter_avp_vendor_id,
{ "AVP Vendor Id","diameter.avp.vendorId", FT_UINT32, BASE_DEC,
NULL, 0x0, "", HFILL }},
***************
*** 926,932 ****
{ &hf_diameter_avp_data_bytes,
{ "AVP Data","diameter.avp.data.bytes", FT_BYTES, BASE_NONE,
NULL, 0x0, "", HFILL }},
!
{ &hf_diameter_avp_data_string,
{ "AVP Data","diameter.avp.data.string", FT_STRING, BASE_NONE,
NULL, 0x0, "", HFILL }},
--- 1678,1684 ----
{ &hf_diameter_avp_data_bytes,
{ "AVP Data","diameter.avp.data.bytes", FT_BYTES, BASE_NONE,
NULL, 0x0, "", HFILL }},
!
{ &hf_diameter_avp_data_string,
{ "AVP Data","diameter.avp.data.string", FT_STRING, BASE_NONE,
NULL, 0x0, "", HFILL }},
***************
*** 951,971 ****
module_t *diameter_module;
proto_diameter = proto_register_protocol (gbl_diameterString,
! "DIAMETER", "diameter");
proto_register_field_array(proto_diameter, hf, array_length(hf));
proto_register_subtree_array(ett, array_length(ett));
/* Register a configuration option for port */
diameter_module = prefs_register_protocol(proto_diameter,
! proto_reg_handoff_diameter);
prefs_register_uint_preference(diameter_module, "tcp.port",
! "DIAMETER TCP Port",
! "Set the TCP port for DIAMETER messages",
! 10,
! &gbl_diameterTcpPort);
prefs_register_uint_preference(diameter_module, "sctp.port",
! "DIAMETER SCTP Port",
! "Set the SCTP port for DIAMETER messages",
! 10,
! &gbl_diameterSctpPort);
! }
--- 1703,1738 ----
module_t *diameter_module;
proto_diameter = proto_register_protocol (gbl_diameterString,
! "Diameter", "diameter");
proto_register_field_array(proto_diameter, hf, array_length(hf));
proto_register_subtree_array(ett, array_length(ett));
/* Register a configuration option for port */
diameter_module = prefs_register_protocol(proto_diameter,
! proto_reg_handoff_diameter);
prefs_register_uint_preference(diameter_module, "tcp.port",
! "Diameter TCP Port",
! "Set the TCP port for Diameter messages",
! 10,
! &gbl_diameterTcpPort);
prefs_register_uint_preference(diameter_module, "sctp.port",
! "Diameter SCTP Port",
! "Set the SCTP port for Diameter messages",
! 10,
! &gbl_diameterSctpPort);
! /*
! * Build our default dictionary filename
! */
! if (! gbl_diameterDictionary) {
! gbl_diameterDictionary = (gchar *) g_malloc(strlen(get_datafile_dir()) +
! 1 + strlen(DICT_FN) + 1); /* slash + fn + null */
! sprintf(gbl_diameterDictionary, "%s" G_DIR_SEPARATOR_S "%s",
! get_datafile_dir(), DICT_FN );
! }
! /* Now register it's preferences so it can be changed. */
! prefs_register_string_preference(diameter_module, "dictionary.name",
! "Diameter XML Dictionary",
! "Set the dictionary used for Diameter messages",
! &gbl_diameterDictionary);
!
! } /* proto_register_diameter */
Index: packet-mip.c
===================================================================
RCS file: /cvsroot/ethereal/packet-mip.c,v
retrieving revision 1.19
diff -c -r1.19 packet-mip.c
*** packet-mip.c 2001/09/14 07:10:05 1.19
--- packet-mip.c 2001/10/30 04:13:30
***************
*** 386,391 ****
--- 386,394 ----
/* Register the protocol name and description */
proto_mip = proto_register_protocol("Mobile IP", "Mobile IP", "mip");
+ /* Register the dissector */
+ register_dissector("mip", dissect_mip, proto_mip);
+
/* Required function calls to register the header fields and subtrees used */
proto_register_field_array(proto_mip, hf, array_length(hf));
proto_register_subtree_array(ett, array_length(ett));
Attachment:
diammip1.gz
Description: application/gunzip
<?xml version="1.0" encoding="UTF-8"?> <!-- $Log: dictionary.dtd,v $ Revision 1.1 2001/08/24 18:04:44 chaos Added per Mark's request Revision 1.3 2001/07/31 17:43:36 chaos Oops, forgot to turn on validity checking. Fixed some errors found with validity checking turned on Revision 1.2 2001/07/31 16:56:15 chaos Lots of changes to support flags like in the draft, and to support commands --> <!ELEMENT dictionary (base, application*)> <!ELEMENT base (command*, vendor*, typedefn+, avp+)> <!ATTLIST base uri CDATA #IMPLIED > <!ELEMENT application (command*, vendor*, typedefn*, avp*)> <!ATTLIST application id CDATA #REQUIRED name CDATA #IMPLIED uri CDATA #IMPLIED > <!ELEMENT command (#PCDATA)> <!ATTLIST command name CDATA #REQUIRED code CDATA #REQUIRED vendor-id IDREF #IMPLIED > <!ELEMENT vendor EMPTY> <!ATTLIST vendor vendor-id ID #REQUIRED code CDATA #REQUIRED name CDATA #IMPLIED > <!ELEMENT typedefn EMPTY> <!ATTLIST typedefn type-name ID #REQUIRED type-parent IDREF #IMPLIED description CDATA #IMPLIED > <!ELEMENT avp ((type | grouped), (enum*))> <!ATTLIST avp name ID #REQUIRED description CDATA #IMPLIED code CDATA #REQUIRED may-encrypt (yes | no) "yes" mandatory (must | may | mustnot | shouldnot) "may" protected (must | may | mustnot | shouldnot) "may" vendor-bit (must | may | mustnot | shouldnot) "mustnot" vendor-id IDREF #IMPLIED constrained (true | false) "false" > <!ELEMENT type EMPTY> <!ATTLIST type type-name IDREF #REQUIRED > <!ELEMENT grouped (gavp+)> <!ELEMENT gavp EMPTY> <!ATTLIST gavp name IDREF #REQUIRED > <!ELEMENT enum EMPTY> <!ATTLIST enum name CDATA #REQUIRED code CDATA #REQUIRED >
<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE dictionary SYSTEM "dictionary.dtd" [ <!ENTITY nasreq SYSTEM "nasreq.xml"> <!ENTITY mobileipv4 SYSTEM "mobileipv4.xml"> <!ENTITY sunping SYSTEM "sunping.xml"> ]> <dictionary> <base uri="ftp://ftp.ietf.org/internet-drafts/draft-ietf-aaa-diameter-07.txt";> <!-- $Log: dictionary.xml,v $ Revision 1.7 2001/08/24 18:03:24 chaos Mark's Changes Revision 1.6 2001/07/31 19:13:55 chaos Missed a couple of MIP AVPs Revision 1.5 2001/07/31 19:09:22 chaos Added Mobile-Ip and Sun Ping Extension Revision 1.4 2001/07/31 17:43:25 chaos Oops, forgot to turn on validity checking. Fixed some errors found with validity checking turned on Revision 1.3 2001/07/31 16:56:31 chaos Added commands, and validated with xmllint Revision 1.2 2001/07/31 16:29:34 chaos Checking in some changes to verify log and ident strings --> <!-- *********************** Commands ***************************** --> <!-- Diameter Base Protocol Command Codes --> <command name="Abort-Session" code="274" vendor-id="None"> <!-- Maybe some avp stuff here one day --> </command> <command name="Accounting" code="271" vendor-id="None"/> <command name="Capabilities-Exchange" code="257" vendor-id="None"/> <command name="Device-Watchdog" code="280" vendor-id="None"/> <command name="Disconnect-Peer" code="282" vendor-id="None"/> <command name="Re-Auth" code="258" vendor-id="None"/> <command name="Session-Termination" code="275" vendor-id="None"/> <!-- ********************** End Commands ************************** --> <!-- ************************* Vendors **************************** --> <vendor vendor-id="None" code="0" name="None"/> <vendor vendor-id="Merit" code="61" name="Merit Networks"/> <vendor vendor-id="Sun" code="42" name="Sun Microsystems, Inc."/> <vendor vendor-id="USR" code="429" name="US Robotics Corp."/> <!-- *********************** End Vendors ************************** --> <!-- ************************ typedefn's ************************** --> <typedefn type-name="OctetString"/> <!-- The data contains arbitrary data of variable length. Unless otherwise noted, the AVP Length field MUST be set to at least 9 (13 if the 'V' bit is enabled). Data used to transmit (human readable) character string data uses the UTF-8 [24] character set and is NOT NULL-terminated. The minimum Length field MUST be 9, but can be set to any value up to 65504 bytes. AVP Values of this type that do not align on a 32-bit boundary MUST have the necessary padding. --> <typedefn type-name="UTF8String" type-parent="OctetString"/> <!-- The UTF8String format is derived from the OctetString AVP Base Format. This is a human readable string represented using the ISO/IEC IS 10646-1 character set, encoded as an OctetString using the UTF-8 [29] transformation format described in RFC 2279. Since additional code points are added by amendments to the 10646 standard from time to time, implementations MUST be prepared to encounter any code point from 0x00000001 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. Note that since a code point of 0x00000000 is prohibited, no octet will contain a value of 0x00. The use of control codes SHOULD be avoided. When it is necessary to represent a newline, the control code sequence CR LF SHOULD be used. The use of leading or trailing white space SHOULD be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, MAY be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of a UTF8String in octets may be different from the number of characters encoded. Note that the size of an UTF8String is measured in octets, not characters. The UTF8String MUST not contain any octets with a value of zero. --> <typedefn type-name="IPAddress" type-parent="OctetString"/> <!-- The IPAddress format is derived from the OctetString AVP Base Format. It represents 32 bit (IPv4) [17] or 128 bit (IPv6) [16] address, most significant octet first. The format of the address (IPv4 or IPv6) is determined by the length. If the attribute value is an IPv4 address, the AVP Length field MUST be 12 (16 if 'V' bit is enabled), otherwise the AVP Length field MUST be set to 24 (28 if the 'V' bit is enabled) for IPv6 addresses. --> <typedefn type-name="DiameterIdentity" type-parent="OctetString"/> <!-- The DiameterIdentity format is derived from the OctetString AVP Base Format. It uses the UTF-8 encoding and has the same requirements as the UTF8String. In addition, it must follow the Uniform Resource Identifiers (URI) syntax [29] rules specified below: Diameter-Identity = fqdn [ port ] [ transport ] [ protocol ] aaa-protocol = ( "diameter" | "radius" | "tacacs+" ) protocol = ";protocol=" aaa-protocol ; If absent, the default AAA protocol ; is diameter. fqdn = Fully Qualified Host Name port = ":" 1*DIGIT ; One of the ports used to listen for ; incoming connections. ; If absent, ; the default Diameter port (TBD) is ; assumed. transport-protocol = ( "tcp" | "sctp" | "udp" ) transport = ";transport=" transport-protocol ; One of the transports used to listen ; for incoming connections. If absent, ; the default SCTP [26] protocol is ; assumed. UDP MUST NOT be used when ; the aaa-protocol field is set to ; diameter. The following are examples of valid Diameter host identities: host.abc.com;transport=tcp host.abc.com:6666;transport=tcp aaa://host.abc.com;protocol=diameter aaa://host.abc.com:6666;protocol=diameter aaa://host.abc.com:6666;transport=tcp;protocol=diameter aaa://host.abc.com:1813;transport=udp;protocol=radius Since multiple Diameter processes on a single host cannot listen for incoming connections on the same port on a given protocol, the DiameterIdentity is guaranteed to be unique per host. A Diameter node MAY advertise different identities on each connection, via the CER and CEA's Origin-Host AVP, but the same identity MUST be used throughout the duration of a connection. When comparing AVPs of this format, it is necessary to add any absent fields with the default values prior to the comparison. For example, diameter-host.abc.com would be expanded to aaa://diameter/diameter-host.abc.com:TBD;protocol=sctp. --> <typedefn type-name="IPFilterRule" type-parent="OctetString"/> <!-- The IPFilterRule format is derived from the OctetString AVP Base Format. It uses the UTF-8 encoding and has the same requirements as the UTF8String. Packets may be filtered based on the following information that is associated with it: Direction (in or out) Source and destination IP address (possibly masked) Protocol Source and destination port (lists or ranges) TCP flags IP fragment flag IP options ICMP types Rules for the appropriate direction are evaluated in order, with the first matched rule terminating the evaluation. Each packet is evaluated once. If no rule matches, the packet is dropped if the last rule evaluated was a permit, and passed if the last rule was a deny. IPFilterRule filters MUST follow the format: action dir proto from src to dst [options] action permit - Allow packets that match the rule. deny - Drop packets that match the rule. dir "in" is from the terminal, "out" is to the terminal. proto An IP protocol specified by number. The "ip" keyword means any protocol will match. src and dst <address/mask> [ports] The <address/mask> may be specified as: ipno An IPv4 or IPv6 number in dotted- quad or canonical IPv6 form. Only this exact IP number will match the rule. ipno/bits An IP number as above with a mask width of the form 1.2.3.4/24. In this case all IP numbers from 1.2.3.0 to 1.2.3.255 will match. The bit width MUST be valid for the IP version and the IP number MUST NOT have bits set beyond the mask. The sense of the match can be inverted by preceding an address with the not modifier, causing all other addresses to be matched instead. This does not affect the selection of port numbers. The keyword "any" is 0.0.0.0/0 or the IPv6 equivalent. The keyword "assigned" is the address or set of addresses assigned to the terminal. The first rule SHOULD be "deny in ip !assigned". With the TCP, UDP and SCTP protocols, optional ports may be specified as: {port|port-port}[,port[,...]] The `-' notation specifies a range of ports (including boundaries). Fragmented packets which have a non-zero offset (i.e. not the first fragment) will never match a rule which has one or more port specifications. See the frag option for details on matching fragmented packets. options: frag Match if the packet is a fragment and this is not the first fragment of the datagram. frag may not be used in conjunction with either tcpflags or TCP/UDP port specifications. ipoptions spec Match if the IP header contains the comma separated list of options specified in spec. The supported IP options are: ssrr (strict source route), lsrr (loose source route), rr (record packet route) and ts (timestamp). The absence of a particular option may be denoted with a `!'. tcpoptions spec Match if the TCP header contains the comma separated list of options specified in spec. The supported TCP options are: mss (maximum segment size), window (tcp window advertisement), sack (selective ack), ts (rfc1323 timestamp) and cc (rfc1644 t/tcp connection count). The absence of a particular option may be denoted with a `!'. established TCP packets only. Match packets that have the RST or ACK bits set. setup TCP packets only. Match packets that have the SYN bit set but no ACK bit. tcpflags spec TCP packets only. Match if the TCP header contains the comma separated list of flags specified in spec. The supported TCP flags are: fin, syn, rst, psh, ack and urg. The absence of a particular flag may be denoted with a `!'. A rule which contains a tcpflags specification can never match a fragmented packet which has a non-zero offset. See the frag option for details on matching fragmented packets. icmptypes types ICMP packets only. Match if the ICMP type is in the list types. The list may be specified as any combination of ranges or individual types separated by commas. The supported ICMP types are: echo reply (0), destination unreachable (3), source quench (4), redirect (5), echo request (8), router advertisement (9), router solicitation (10), time-to-live exceeded (11), IP header bad (12), timestamp request (13), timestamp reply (14), information request (15), information reply (16), address mask request (17) and address mask reply (18). There is one kind of packet that the access device MUST always discard, that is an IP fragment with a fragment offset of one. This is a valid packet, but it only has one use, to try to circumvent firewalls. An access device that is unable to interpret or apply a deny rule MUST terminate the session. An access device that is unable to interpret or apply a permit rule MAY apply a more restrictive rule. An access device MAY apply deny rules of its own before the supplied rules, for example to protect the access device owner's infrastructure. The rule syntax is a modified subset of ipfw(8) from FreeBSD, and the ipfw.c code may provide a useful base for implementations. --> <typedefn type-name="QOSFilterRule" type-parent="OctetString"/> <!-- The QosFilterRule format is derived from the OctetString AVP Base Format. It uses the UTF-8 encoding and has the same requirements as the UTF8String. Packets may be marked or metered based on the following information that is associated with it: Direction (in or out) Source and destination IP address (possibly masked) Protocol Source and destination port (lists or ranges) DSCP values (no mask or range) Rules for the appropriate direction are evaluated in order, with the first matched rule terminating the evaluation. Each packet is evaluated once. If no rule matches, the packet is treated as best effort. QoSFilterRule filters MUST follow the format: action dir proto from src to dst [options] tag - Mark packet with a specific DSCP [49]. The DSCP option MUST be included. meter - Meter traffic. The metering options MUST be included. dir "in" is from the terminal, "out" is to the terminal. proto An IP protocol specified by number. The "ip" keyword means any protocol will match. src and dst <address/mask> [ports] The <address/mask> may be specified as: ipno An IPv4 or IPv6 number in dotted- quad or canonical IPv6 form. Only this exact IP number will match the rule. ipno/bits An IP number as above with a mask width of the form 1.2.3.4/24. In this case all IP numbers from 1.2.3.0 to 1.2.3.255 will match. The bit width MUST be valid for the IP version and the IP number MUST NOT have bits set beyond the mask. The sense of the match can be inverted by preceding an address with the not modifier, causing all other addresses to be matched instead. This does not affect the selection of port numbers. The keyword "any" is 0.0.0.0/0 or the IPv6 equivalent. The keyword "assigned" is the address or set of addresses assigned to the terminal. The first rule SHOULD be "deny in ip !assigned". With the TCP, UDP and SCTP protocols, optional ports may be specified as: {port|port-port}[,port[,...]] The `-' notation specifies a range of ports (including boundaries). options: DSCP <color> color values as defined in [49]. Exact matching of DSCP values is required (no masks or ranges). the "deny" can replace the color_under or color_over values in the meter action for rate- dependent packet drop. metering <rate> <color_under> <color_over> The metering option provides Assured Forwarding, as defined in [50], and MUST be present if the action is set to meter. The rate option is the throughput, in bits per second, which is used by the access device to mark packets. Traffic above the rate is marked with the color_over codepoint, while traffic under the rate is marked with the color_under codepoint. The color_under and color_over options contain the drop preferences, and MUST conform to the recommended codepoint keywords described in [50] (e.g. AF13). The metering option also supports the strict limit on traffic required by Expedited Forwarding, as defined in [51]. The color_over option may contain the keyword "drop" to prevent forwarding of traffic that exceeds the rate parameter. The rule syntax is a modified subset of ipfw(8) from FreeBSD, and the ipfw.c code may provide a useful base for implementations. --> <typedefn type-name="MIPRegistrationRequest" type-parent="OctetString"/> <typedefn type-name="Integer32"/> <!-- 32 bit signed value, in network byte order. The AVP Length field MUST be set to 12 (16 if the 'V' bit is enabled). --> <typedefn type-name="VendorId" type-parent="Integer32"/> <typedefn type-name="AppId" type-parent="Integer32"/> <typedefn type-name="Integer64"/> <!-- 64 bit signed value, in network byte order. The AVP Length field MUST be set to 16 (20 if the 'V' bit is enabled). --> <typedefn type-name="Unsigned32"/> <!-- 32 bit unsigned value, in network byte order. The AVP Length field MUST be set to 12 (16 if the 'V' bit is enabled). Unsigned32 values used to transmit time data contains the four most significant octets returned from NTP [18], in network byte order. --> <typedefn type-name="Time"/> <!-- The Time format is derived from the Unsigned32 AVP Base Format. This is 32 bit unsigned value containing the four most significant octets returned from NTP [18], in network byte order. This represent the number of seconds since 0h on 1 January 1900 with respect to the Coordinated Universal Time (UTC). On 6h 28m 16s UTC, 7 February 2036 the time value will overflow. NTP [18] describes a procedure to extend the time to 2104. --> <typedefn type-name="Unsigned64"/> <!-- 64 bit unsigned value, in network byte order. The AVP Length field MUST be set to 16 (20 if the 'V' bit is enabled). --> <!-- ************************* End Typedefns ************************ --> <!-- ******************* DIAMETER BASE PROTOCOL AVPS ************************ --> <avp name="Accounting-Interim-Interval" code="482" mandatory="must" may-encrypt="yes" vendor-bit="mustnot"> <type type-name="Unsigned32"/> </avp> <avp name="Accounting-Multi-Session-Id" code="50" mandatory="must" protected="may" may-encrypt="yes" vendor-bit="mustnot"> <type type-name="Unsigned32"/> </avp> <avp name="Accounting-Record-Number" code="485" mandatory="must" may-encrypt="yes" vendor-bit="mustnot"> <type type-name="Unsigned32"/> </avp> <avp name="Accounting-Record-Type" code="480" mandatory="must" may-encrypt="yes" vendor-bit="mustnot"> <type type-name="Unsigned32"/> <enum name="Event Record" code="1"/> <enum name="Start Record" code="2"/> <enum name="Interim Record" code="3"/> <enum name="Stop Record" code="4"/> </avp> <avp name="Accounting-Session-Id" code="44" mandatory="must" protected="may" may-encrypt="yes" vendor-bit="mustnot"> <type type-name="Unsigned32"/> </avp> <avp name="Acct-Application-Id" code="259" mandatory="must" protected="mustnot" may-encrypt="no" vendor-bit="mustnot"> <type type-name="AppId"/> </avp> <avp name="Alternate-Peer" code="275" mandatory="must" protected="mustnot" may-encrypt="no" vendor-bit="mustnot"> <type type-name="DiameterIdentity"/> </avp> <avp name="Auth-Application-Id" code="258" mandatory="must" protected="mustnot" may-encrypt="no" vendor-bit="mustnot"> <type type-name="AppId"/> </avp> <avp name="Auth-Request-Type" code="274" mandatory="must" protected="mustnot" may-encrypt="no" vendor-bit="mustnot"> <type type-name="Unsigned32"/> <enum name="Authenticate Only" code="1"/> <enum name="Authorize Only" code="2"/> <enum name="Authorize Authenticate" code="3"/> </avp> <avp name="Authorization-Lifetime" code="291" mandatory="must" may-encrypt="no" vendor-bit="mustnot"> <type type-name="Integer32"/> </avp> <avp name="Auth-Grace-Period" code="276" mandatory="must" may-encrypt="no" vendor-bit="mustnot"> <type type-name="Unsigned32"/> </avp> <avp name="Auth-Session-State" code="277" mandatory="must" may-encrypt="no" vendor-bit="mustnot"> <type type-name="Unsigned32"/> <enum name="State Maintained" code="0"/> <enum name="No State Maintained" code="0"/> </avp> <avp name="Re-Auth-Request-Type" code="285" mandatory="must" may-encrypt="no" vendor-bit="mustnot"> <type type-name="Unsigned32"/> <enum name="Authorize Only" code="0"/> <enum name="Authorize Authenticate" code="1"/> </avp> <avp name="Destination-Host" code="293" mandatory="must" protected="mustnot" may-encrypt="no" vendor-bit="mustnot"> <type type-name="DiameterIdentity"/> </avp> <avp name="Destination-Realm" code="283" mandatory="must" protected="mustnot" may-encrypt="no" vendor-bit="mustnot"> <type type-name="UTF8String"/> </avp> <avp name="Disconnect-Cause" code="273" mandatory="must" protected="mustnot" may-encrypt="no" vendor-bit="mustnot"> <type type-name="Unsigned32"/> <enum name="Rebooting" code="0"/> <enum name="Busy" code="2"/> <enum name="Do not want to talk to you" code="2"/> </avp> <avp name="Error-Message" code="281" mandatory="must" protected="mustnot" may-encrypt="no" vendor-bit="mustnot"> <type type-name="UTF8String"/> </avp> <avp name="Error-Reporting-Host" code="294" mandatory="must" protected="mustnot" may-encrypt="no" vendor-bit="mustnot"> <type type-name="DiameterIdentity"/> </avp> <avp name="Failed-AVP" code="279" mandatory="must" may-encrypt="no" vendor-bit="mustnot"> <type type-name="OctetString"/> </avp> <avp name="Firmware-Revision" code="267" mandatory="must" protected="mustnot" may-encrypt="no" vendor-bit="mustnot"> <type type-name="Unsigned32"/> </avp> <avp name="Host-IP-Address" code="257" mandatory="must" protected="mustnot" may-encrypt="no" vendor-bit="mustnot"> <type type-name="IPAddress"/> </avp> <avp name="Multi-Round-Time-Out" code="272" mandatory="must" may-encrypt="yes" vendor-bit="mustnot"> <type type-name="Unsigned32"/> </avp> <avp name="Origin-Host" code="264" mandatory="must" may-encrypt="no" protected="mustnot" vendor-bit="mustnot"> <type type-name="DiameterIdentity"/> </avp> <avp name="Origin-Realm" code="296" mandatory="must" may-encrypt="no" protected="mustnot" vendor-bit="mustnot"> <type type-name="UTF8String"/> </avp> <avp name="Origin-State-Id" code="278" mandatory="must" protected="mustnot" vendor-bit="mustnot"> <type type-name="Unsigned32"/> </avp> <avp name="Product-Name" code="269" mandatory="mustnot" may-encrypt="no" protected="mustnot" vendor-bit="mustnot"> <type type-name="UTF8String"/> </avp> <avp name="Proxy-Host" code="280" mandatory="must" may-encrypt="no" protected="mustnot" vendor-bit="mustnot"> <type type-name="DiameterIdentity"/> </avp> <avp name="Proxy-Info" code="284" mandatory="must" may-encrypt="no" protected="mustnot" vendor-bit="mustnot"> <type type-name="OctetString"/> </avp> <avp name="Redirect-Host" code="292" mandatory="must" may-encrypt="no" protected="mustnot" vendor-bit="mustnot"> <type type-name="DiameterIdentity"/> </avp> <avp name="Redirect-Host-Usage" code="261" mandatory="must" may-encrypt="no" protected="mustnot" vendor-bit="mustnot"> <type type-name="Unsigned32"/> <enum name="Don't Care" code="0"/> <enum name="All Session" code="1"/> <enum name="All Realm" code="2"/> <enum name="Realm and Application" code="3"/> <enum name="All Application" code="4"/> <enum name="All Host" code="5"/> </avp> <avp name="Redirect-Max-Cache-Time" code="262" mandatory="must" may-encrypt="no" protected="mustnot" vendor-bit="mustnot"> <type type-name="Unsigned32"/> </avp> <avp name="Result-Code" code="268" mandatory="must" may-encrypt="no" protected="mustnot" vendor-bit="mustnot"> <type type-name="Unsigned32"/> </avp> <avp name="Route-Record" code="282" mandatory="must" may-encrypt="no" protected="mustnot" vendor-bit="mustnot"> <type type-name="DiameterIdentity"/> </avp> <avp name="Session-Id" code="263" mandatory="must" protected="mustnot" vendor-bit="mustnot"> <type type-name="UTF8String"/> </avp> <avp name="Session-Binding" code="270" mandatory="must" protected="mustnot" vendor-bit="mustnot"> <type type-name="Unsigned32"/> </avp> <avp name="Session-Server-Failover" code="271" mandatory="must" protected="mustnot" vendor-bit="mustnot"> <type type-name="Unsigned32"/> <enum name="Refuse Service" code="0"/> <enum name="Try Again" code="1"/> <enum name="Allow Service" code="2"/> <enum name="Try Again / Allow Service" code="3"/> </avp> <avp name="Source-Route" code="286" mandatory="must" may-encrypt="no" protected="mustnot" vendor-bit="mustnot"> <type type-name="DiameterIdentity"/> </avp> <avp name="Supported-Vendor-Id" code="265" mandatory="must" may-encrypt="no" protected="mustnot" vendor-bit="mustnot"> <type type-name="VendorId"/> </avp> <avp name="Termination-Cause" code="295" mandatory="must" may-encrypt="no" protected="mustnot" vendor-bit="mustnot"> <type type-name="Unsigned32"/> <enum name="Logout" code="1"/> <enum name="Service Not Provided" code="2"/> <enum name="Bad Answer" code="3"/> <enum name="Administrative" code="4"/> <enum name="Link Broken" code="5"/> </avp> <avp name="Vendor-Id" code="266" mandatory="must" may-encrypt="no" protected="mustnot" vendor-bit="mustnot"> <type type-name="VendorId"/> </avp> <avp name="Vendor-Specific-Application-Id" code="260" mandatory="must" may-encrypt="no" protected="mustnot" vendor-bit="mustnot"> <grouped> <gavp name="Vendor-Id"/> <gavp name="Auth-Application-Id"/> <gavp name="Acct-Application-Id"/> </grouped> </avp> <avp name="Example-AVP" code="999999" mandatory="mustnot" vendor-bit="may"> <grouped> <gavp name="Origin-Host"/> <gavp name="Host-IP-Address"/> </grouped> </avp> <!-- ************************ END DIAMETER BASE PROTOCOL AVPS ******************* --> </base> &nasreq; &mobileipv4; &sunping; </dictionary>
<?xml version="1.0" encoding="UTF-8"?> <application id="4" name="Mobile IPv4 Application" uri="ftp://ftp.ietf.org/internet-drafts/draft-ietf-aaa-diameter-mobileip-07.txt";> <!-- Mobile-IPv4 Application --> <command name="AA-Mobile-Node" code="260" vendor-id="None"/> <command name="Home-Agent-MIP" code="262" vendor-id="None"/> <!-- ************************** Mobile-IPv4 AVPS ********************* --> <avp name="MIP-Filter-Rule" code="347" mandatory="must" vendor-bit="mustnot" may-encrypt="yes"> <type type-name="IPFilterRule"/> </avp> <avp name="MIP-Auth-Input-Data-Length" code="338" mandatory="must" vendor-bit="mustnot" may-encrypt="yes"> <type type-name="Unsigned32"/> </avp> <avp name="MIP-Authenticator-Length" code="339" mandatory="must" vendor-bit="mustnot" may-encrypt="yes"> <type type-name="Unsigned32"/> </avp> <avp name="MIP-Authenticator-Offset" code="340" mandatory="must" vendor-bit="mustnot" may-encrypt="yes"> <type type-name="Unsigned32"/> </avp> <avp name="MIP-FA-Challenge" code="344" mandatory="must" vendor-bit="mustnot" may-encrypt="yes"> <type type-name="OctetString"/> </avp> <avp name="MIP-Feature-Vector" code="337" mandatory="must" vendor-bit="mustnot" may-encrypt="yes"> <type type-name="Unsigned32"/> </avp> <avp name="MIP-Foreign-Agent-Host" code="330" mandatory="must" vendor-bit="mustnot" may-encrypt="yes"> <type type-name="DiameterIdentity"/> </avp> <avp name="MIP-Home-Agent-Address" code="334" mandatory="must" vendor-bit="mustnot" may-encrypt="yes"> <type type-name="IPAddress"/> </avp> <avp name="MIP-MN-AAA-Auth" code="322" mandatory="must" vendor-bit="mustnot" may-encrypt="yes"> <grouped> <gavp name="MIP-MN-AAA-SPI"/> <gavp name="MIP-Auth-Input-Data-Length"/> <gavp name="MIP-Authenticator-Length"/> <gavp name="MIP-Authenticator-Offset"/> </grouped> </avp> <avp name="MIP-MN-AAA-SPI" code="341" mandatory="must" vendor-bit="mustnot" may-encrypt="yes"> <type type-name="Unsigned32"/> </avp> <avp name="MIP-Mobile-Node-Address" code="333" mandatory="must" vendor-bit="mustnot" may-encrypt="yes"> <type type-name="IPAddress"/> </avp> <avp name="MIP-Previous-FA-Addr" code="336" mandatory="must" vendor-bit="mustnot" may-encrypt="yes"> <type type-name="IPAddress"/> </avp> <avp name="MIP-Previous-FA-Host" code="335" mandatory="must" vendor-bit="mustnot" may-encrypt="yes"> <type type-name="DiameterIdentity"/> </avp> <avp name="MIP-Reg-Request" code="320" mandatory="must" vendor-bit="mustnot" may-encrypt="yes"> <type type-name="MIPRegistrationRequest"/> </avp> <avp name="MIP-Reg-Reply" code="321" mandatory="must" vendor-bit="mustnot" may-encrypt="yes"> <type type-name="OctetString"/> </avp> <!-- ************************ END Mobile-IPv4 AVPS ******************* --> </application>
<?xml version="1.0" encoding="UTF-8"?> <application id="1" name="NASREQ Application" uri="ftp://ftp.ietf.org/internet-drafts/draft-calhoun-diameter-nasreq-06.txt";> <command name="AA-Request" code="260" vendor-id="None"/> <command name="AA-Answer" code="260" vendor-id="None"/> <!-- ************************* RADIUS AVPs ************************ --> <avp name="User-Name" code="1"> <type type-name="UTF8String"/> </avp> <avp name="User-Password" code="2"> <type type-name="OctetString"/> </avp> <avp name="CHAP-Password" code="3"> <type type-name="OctetString"/> </avp> <avp name="NAS-IP-Address" code="4"> <type type-name="IPAddress"/> </avp> <avp name="NAS-Port" code="5"> <type type-name="Integer32"/> </avp> <avp name="Service-Type" code="6"> <type type-name="Unsigned32"/> <enum name="Labels" code="3"/> <enum name="RSVP" code="1"/> <enum name="TOS" code="2"/> </avp> <avp name="Framed-Protocol" code="7"> <type type-name="Unsigned32"/> <enum name="ARA" code="3"/> <enum name="Ascend-ARA" code="255"/> <enum name="COMB" code="260"/> <enum name="EURAW" code="257"/> <enum name="EUUI" code="258"/> <enum name="FR" code="261"/> <enum name="Gandalf" code="4"/> <enum name="MPP" code="256"/> <enum name="PPP" code="1"/> <enum name="SLIP" code="2"/> <enum name="X25" code="259"/> <enum name="Xylogics" code="5"/> </avp> <avp name="Framed-IP-Address" code="8"> <type type-name="IPAddress"/> </avp> <avp name="Framed-IP-Netmask" code="9"> <type type-name="IPAddress"/> </avp> <avp name="Framed-Routing" code="10"> <type type-name="Unsigned32"/> <enum name="Broadcast" code="1"/> <enum name="Broadcast-Listen" code="3"/> <enum name="Listen" code="2"/> <enum name="None" code="0"/> </avp> <avp name="Filter-Id" code="11"> <type type-name="UTF8String"/> </avp> <avp name="Framed-MTU" code="12"> <type type-name="Integer32"/> </avp> <avp name="Framed-Compression" code="13"> <type type-name="Unsigned32"/> <enum name="IPX-Header-Compression" code="2"/> <enum name="None" code="0"/> <enum name="Van-Jacobson-TCP-IP" code="1"/> </avp> <avp name="Login-IP-Host" code="14"> <type type-name="IPAddress"/> </avp> <avp name="Login-Service" code="15"> <type type-name="Unsigned32"/> <enum name="LAT" code="4"/> <enum name="PortMaster" code="3"/> <enum name="Rlogin" code="1"/> <enum name="TCP-Clear" code="2"/> <enum name="Telnet" code="0"/> <enum name="X25-PAD" code="5"/> <enum name="X25-T3POS" code="6"/> </avp> <avp name="Login-TCP-Port" code="16"> <type type-name="Integer32"/> </avp> <avp name="Old-Password" code="17"> <type type-name="OctetString"/> </avp> <avp name="Reply-Message" code="18"> <type type-name="UTF8String"/> </avp> <avp name="Callback-Number" code="19"> <type type-name="OctetString"/> </avp> <avp name="Callback-Id" code="20"> <type type-name="OctetString"/> </avp> <avp name="Framed-Route" code="22"> <type type-name="UTF8String"/> </avp> <avp name="Framed-IPX-Network" code="23"> <type type-name="OctetString"/> </avp> <avp name="State" code="24"> <type type-name="OctetString"/> </avp> <avp name="Class" code="25"> <type type-name="OctetString"/> </avp> <avp name="Vendor-Specific" code="26"> <type type-name="Unsigned32"/> <!-- Should vendors be enum'ed? --> </avp> <avp name="Session-Timeout" code="27"> <type type-name="Integer32"/> </avp> <avp name="Idle-Timeout" code="28"> <type type-name="Integer32"/> </avp> <avp name="Termination-Action" code="29"> <type type-name="Unsigned32"/> <enum name="Default" code="0"/> <enum name="RADIUS-Request" code="1"/> </avp> <avp name="Called-Station-Id" code="30"> <type type-name="OctetString"/> </avp> <avp name="Calling-Station-Id" code="31"> <type type-name="OctetString"/> </avp> <avp name="NAS-Identifier" code="32"> <type type-name="OctetString"/> </avp> <avp name="Proxy-State" code="33"> <type type-name="OctetString"/> </avp> <avp name="Login-LAT-Service" code="34"> <type type-name="OctetString"/> </avp> <avp name="Login-LAT-Node" code="35"> <type type-name="OctetString"/> </avp> <avp name="Login-LAT-Group" code="36"> <type type-name="OctetString"/> </avp> <avp name="Framed-AppleTalk-Link" code="37"> <type type-name="Integer32"/> </avp> <avp name="Framed-AppleTalk-Network" code="38"> <type type-name="Integer32"/> </avp> <avp name="Framed-AppleTalk-Zone" code="39"> <type type-name="OctetString"/> </avp> <avp name="Acct-Status-Type" code="40"> <type type-name="Unsigned32"/> <enum name="Accounting-Off" code="8"/> <enum name="Accounting-On" code="7"/> <enum name="Alive" code="3"/> <enum name="Cancel" code="6"/> <enum name="Modem-Start" code="4"/> <enum name="Modem-Stop" code="5"/> <enum name="Start" code="1"/> <enum name="Stop" code="2"/> </avp> <avp name="Acct-Delay-Time" code="41"> <type type-name="Integer32"/> </avp> <avp name="Acct-Input-Octets" code="42"> <type type-name="Integer32"/> </avp> <avp name="Acct-Output-Octets" code="43"> <type type-name="Integer32"/> </avp> <avp name="Acct-Session-Id" code="44" mandatory="must"> <type type-name="OctetString"/> </avp> <avp name="Acct-Authentic" code="45"> <type type-name="Unsigned32"/> <enum name="Local" code="2"/> <enum name="None" code="0"/> <enum name="RADIUS" code="1"/> </avp> <avp name="Acct-Session-Time" code="46"> <type type-name="Integer32"/> </avp> <avp name="Acct-Input-Packets" code="47"> <type type-name="Integer32"/> </avp> <avp name="Acct-Output-Packets" code="48"> <type type-name="Integer32"/> </avp> <avp name="Acct-Terminate-Cause" code="49"> <type type-name="Unsigned32"/> <enum name="Admin-Reboot" code="7"/> <enum name="Admin-Reset" code="6"/> <enum name="Callback" code="16"/> <enum name="Host-Request" code="18"/> <enum name="Idle-Timeout" code="4"/> <enum name="Lost-Carrier" code="2"/> <enum name="Lost-Service" code="3"/> <enum name="NAS-Error" code="9"/> <enum name="NAS-Reboot" code="11"/> <enum name="NAS-Request" code="10"/> <enum name="Port-Error" code="8"/> <enum name="Port-Preempted" code="13"/> <enum name="Port-Suspended" code="14"/> <enum name="Port-Unneeded" code="12"/> <enum name="Service-Unavailable" code="15"/> <enum name="Session-Timeout" code="5"/> <enum name="User-Error" code="17"/> <enum name="User-Request" code="1"/> </avp> <avp name="Acct-Multi-Session-Id" code="50"> <type type-name="OctetString"/> </avp> <avp name="Acct-Link-Count" code="51"> <type type-name="Integer32"/> </avp> <avp name="CHAP-Challenge" code="60"> <type type-name="OctetString"/> </avp> <avp name="NAS-Port-Type" code="61"> <type type-name="Unsigned32"/> <enum name="Async" code="0"/> <enum name="HDLC-Clear-Channel" code="7"/> <enum name="ISDN-Async-v110" code="4"/> <enum name="ISDN-Async-v120" code="3"/> <enum name="ISDN-Sync" code="2"/> <enum name="PIAFS" code="6"/> <enum name="Sync" code="1"/> <enum name="Virtual" code="5"/> <enum name="X25" code="8"/> <enum name="X75" code="9"/> </avp> <avp name="Port-Limit" code="62"> <type type-name="Integer32"/> </avp> <avp name="Login-LAT-Port" code="63"> <type type-name="OctetString"/> </avp> <avp name="Tunnel-Type" code="64"> <type type-name="Unsigned32"/> <enum name="PPTP" code="1"/> <enum name="L2F" code="2"/> <enum name="L2TP" code="3"/> <enum name="ATMP" code="4"/> <enum name="VTP" code="5"/> <enum name="AH" code="6"/> <enum name="IP-IP-Encap" code="7"/> <enum name="MIN-IP-IP" code="8"/> <enum name="ESP" code="9"/> <enum name="GRE" code="10"/> <enum name="DVS" code="11"/> <enum name="IP-IP" code="12"/> </avp> <avp name="Tunnel-Medium-Type" code="65"> <type type-name="Unsigned32"/> <enum name="IPv4" code="1"/> <enum name="IPv6" code="2"/> <enum name="NSAP" code="3"/> <enum name="HDLC" code="4"/> <enum name="BBN" code="5"/> <enum name="IEEE-802" code="6"/> <enum name="E-163" code="7"/> <enum name="E-164" code="8"/> <enum name="F-69" code="9"/> <enum name="X-121" code="10"/> <enum name="IPX" code="11"/> <enum name="Appletalk-802" code="12"/> <enum name="Decnet4" code="13"/> <enum name="Vines" code="14"/> <enum name="E-164-NSAP" code="15"/> </avp> <avp name="Tunnel-Client-Endpoint" code="66"> <type type-name="OctetString"/> </avp> <avp name="Tunnel-Server-Endpoint" code="67"> <type type-name="OctetString"/> </avp> <avp name="Tunnel-Connection-ID" code="68"> <type type-name="OctetString"/> </avp> <avp name="Tunnel-Password" code="69"> <type type-name="OctetString"/> </avp> <avp name="Tunnel-Assignment-Id" code="82"> <type type-name="OctetString"/> </avp> </application>
<?xml version="1.0" encoding="UTF-8"?> <application id="555" name="Sun Ping Application" uri="ftp://ftp.ietf.org/internet-drafts/draft-calhoun-diameter-sun-ping-02.txt";> <!-- *********************** Commands ***************************** --> <!-- Sun Ping Extension --> <command name="Ping" code="511" vendor-id="Sun"/> <!-- ********************** End Commands ************************** --> <!-- ************************ Sun Ping Extension AVPS ******************* --> <avp name="Ping-Timestamp-Secs" code="1" vendor-id="Sun" mandatory="mustnot" vendor-bit="must"> <type type-name="Unsigned32"/> </avp> <avp name="Ping-Timestamp-Usecs" code="2" vendor-id="Sun" mandatory="mustnot" vendor-bit="must"> <type type-name="Unsigned32"/> </avp> <avp name="Ping-Timestamp" code="3" vendor-id="Sun" mandatory="mustnot" vendor-bit="must"> <grouped> <gavp name="Ping-Timestamp-Secs"/> <gavp name="Ping-Timestamp-Usecs"/> </grouped> </avp> <!-- ********************** End Sun Ping Extension AVPS ***************** --> <!-- ************************ Sun PING Extension AVPs ***************************--> </application>
- References:
- [Ethereal-dev] Major Diameter Changes . . . Part 1 - libxml2 support
- From: David Frascone
- [Ethereal-dev] Major Diameter Changes . . . Part 1 - libxml2 support
- Prev by Date: Re: [Ethereal-dev] Plugin API
- Next by Date: [Ethereal-dev] [Bug Report] IPv6 PIM checksum
- Previous by thread: [Ethereal-dev] Major Diameter Changes . . . Part 1 - libxml2 support
- Next by thread: [Ethereal-dev] [Bug Report] IPv6 PIM checksum
- Index(es):
- Get Wireshark
- Download
- Code of Conduct